[PATCH v2 15/17] rockchip: Enable preconsole for rk3328

[Jagan Teki]

Enable and set the start address of pre-console buffer for RK3328.

Signed-off-by: Jagan Teki <jagan at amarulasolutions.com>
---
Changes for v2:
- none

 arch/arm/mach-rockchip/Kconfig | 1 +
 common/Kconfig                 | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b577a911e7..60f403fe74 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -179,6 +179,7 @@ config ROCKCHIP_RK3328
 	select SUPPORT_TPL
 	select TPL
 	select TPL_NEEDS_SEPARATE_STACK if TPL
+	imply PRE_CONSOLE_BUFFER
 	imply ROCKCHIP_COMMON_BOARD
 	imply ROCKCHIP_SDRAM_COMMON
 	imply SPL_ROCKCHIP_COMMON_BOARD
diff --git a/common/Kconfig b/common/Kconfig
index 0f54819519..093ebfbd1e 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -208,7 +208,7 @@ config PRE_CON_BUF_ADDR
 	default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
 	default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
 	default 0x0f000000 if ROCKCHIP_RK3288
-	default 0x0f200000 if ROCKCHIP_RK3399
+	default 0x0f200000 if ROCKCHIP_RK3399 || ROCKCHIP_RK3328
 	help
 	  This sets the start address of the pre-console buffer. This must
 	  be in available memory and is accessed before relocation and
-- 
2.25.1