[PATCH v3 7/7] pci: pcie-brcmstb: Add bcm2712 PCIe controller support
Ivan T. Ivanov
iivanov at suse.de
Mon Dec 18 22:03:41 CET 2023
PCIe controller have minor register map difference compared
to bcm2711 variant. Handle this using device specific register
offset.
Signed-off-by: Ivan T. Ivanov <iivanov at suse.de>
---
drivers/pci/pcie_brcmstb.c | 23 +++++++++++++++++++----
1 file changed, 19 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/pcie_brcmstb.c b/drivers/pci/pcie_brcmstb.c
index cd45f0bee9..d63e715b2e 100644
--- a/drivers/pci/pcie_brcmstb.c
+++ b/drivers/pci/pcie_brcmstb.c
@@ -90,7 +90,6 @@
#define PCIE_MEM_WIN0_LIMIT_HI(win) \
PCIE_MISC_CPU_2_PCIE_MEM_WIN0_LIMIT_HI + ((win) * 8)
-#define PCIE_MISC_HARD_PCIE_HARD_DEBUG 0x4204
#define PCIE_HARD_DEBUG_SERDES_IDDQ_MASK 0x08000000
#define PCIE_MSI_INTR2_CLR 0x4508
@@ -131,6 +130,10 @@
#define SSC_STATUS_PLL_LOCK_MASK 0x800
#define SSC_STATUS_PLL_LOCK_SHIFT 11
+struct pcie_cfg_data {
+ unsigned long hard_debug_offs;
+};
+
/**
* struct brcm_pcie - the PCIe controller state
* @base: Base address of memory mapped IO registers of the controller
@@ -141,6 +144,7 @@
struct brcm_pcie {
void __iomem *base;
+ struct pcie_cfg_data *cfg;
int gen;
bool ssc;
};
@@ -458,7 +462,7 @@ static int brcm_pcie_probe(struct udevice *dev)
/* Take the bridge out of reset */
clrbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_INIT_MASK);
- clrbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
+ clrbits_le32(base + pcie->cfg->hard_debug_offs,
PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
/* Wait for SerDes to be stable */
@@ -599,7 +603,7 @@ static int brcm_pcie_remove(struct udevice *dev)
setbits_le32(base + PCIE_RGR1_SW_INIT_1, RGR1_SW_INIT_1_PERST_MASK);
/* Turn off SerDes */
- setbits_le32(base + PCIE_MISC_HARD_PCIE_HARD_DEBUG,
+ setbits_le32(base + pcie->cfg->hard_debug_offs,
PCIE_HARD_DEBUG_SERDES_IDDQ_MASK);
/* Shutdown bridge */
@@ -620,6 +624,8 @@ static int brcm_pcie_of_to_plat(struct udevice *dev)
if (!pcie->base)
return -EINVAL;
+ pcie->cfg = (struct pcie_cfg_data *)dev_get_driver_data(dev);
+
pcie->ssc = ofnode_read_bool(dn, "brcm,enable-ssc");
ret = ofnode_read_u32(dn, "max-link-speed", &max_link_speed);
@@ -636,8 +642,17 @@ static const struct dm_pci_ops brcm_pcie_ops = {
.write_config = brcm_pcie_write_config,
};
+static const struct pcie_cfg_data bcm2711_cfg = {
+ .hard_debug_offs = 0x4204
+};
+
+static const struct pcie_cfg_data bcm2712_cfg = {
+ .hard_debug_offs = 0x4304
+};
+
static const struct udevice_id brcm_pcie_ids[] = {
- { .compatible = "brcm,bcm2711-pcie" },
+ { .compatible = "brcm,bcm2711-pcie", .data = (ulong)&bcm2711_cfg },
+ { .compatible = "brcm,bcm2712-pcie", .data = (ulong)&bcm2712_cfg },
{ }
};
--
2.35.3
More information about the U-Boot
mailing list