[PATCH v2 31/32] board: qcs404-evb: drop board code

[Caleb Connolly]

This board is entirely supported by the generic arch code and DTS. The
board code used to handle turning on the vbus regulator, however this is
now handled via DT.

With this, the board specific defconfig is also no longer needed, so
drop it as well.

Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
---
 board/qualcomm/qcs404-evb/Makefile     |  6 ----
 board/qualcomm/qcs404-evb/qcs404-evb.c | 49 -----------------------------
 configs/qcs404evb_defconfig            | 56 ----------------------------------
 3 files changed, 111 deletions(-)

diff --git a/board/qualcomm/qcs404-evb/Makefile b/board/qualcomm/qcs404-evb/Makefile
deleted file mode 100644
index 4665827e0859..000000000000
--- a/board/qualcomm/qcs404-evb/Makefile
+++ /dev/null
@@ -1,6 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2022 Sumit Garg <sumit.garg at linaro.org>
-#
-
-obj-y += qcs404-evb.o
diff --git a/board/qualcomm/qcs404-evb/qcs404-evb.c b/board/qualcomm/qcs404-evb/qcs404-evb.c
deleted file mode 100644
index 1a4b1f97a3ae..000000000000
--- a/board/qualcomm/qcs404-evb/qcs404-evb.c
+++ /dev/null
@@ -1,49 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Board init file for QCS404-EVB
- *
- * (C) Copyright 2022 Sumit Garg <sumit.garg at linaro.org>
- */
-
-#include <common.h>
-#include <cpu_func.h>
-#include <dm.h>
-#include <env.h>
-#include <init.h>
-#include <asm/cache.h>
-#include <asm/gpio.h>
-#include <asm/global_data.h>
-#include <fdt_support.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-void qcom_board_init(void)
-{
-	struct udevice *pmic_gpio;
-	struct gpio_desc usb_vbus_boost_pin;
-	int ret, node;
-
-	ret = uclass_get_device_by_name(UCLASS_GPIO,
-					"pms405_gpios at c000",
-					&pmic_gpio);
-	if (ret < 0) {
-		printf("Failed to find pms405_gpios at c000 node.\n");
-		return;
-	}
-
-	node = fdt_subnode_offset(gd->fdt_blob, dev_of_offset(pmic_gpio),
-				  "usb_vbus_boost_pin");
-	if (node < 0) {
-		printf("Failed to find usb_hub_reset_pm dt node.\n");
-		return;
-	}
-	ret = gpio_request_by_name_nodev(offset_to_ofnode(node), "gpios", 0,
-					 &usb_vbus_boost_pin, 0);
-	if (ret < 0) {
-		printf("Failed to request usb_hub_reset_pm gpio.\n");
-		return;
-	}
-
-	dm_gpio_set_dir_flags(&usb_vbus_boost_pin,
-			      GPIOD_IS_OUT | GPIOD_IS_OUT_ACTIVE);
-}
diff --git a/configs/qcs404evb_defconfig b/configs/qcs404evb_defconfig
deleted file mode 100644
index 7daaa449ffbd..000000000000
--- a/configs/qcs404evb_defconfig
+++ /dev/null
@@ -1,56 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_BOARD="qcs404-evb"
-CONFIG_SKIP_LOWLEVEL_INIT=y
-CONFIG_COUNTER_FREQUENCY=19000000
-CONFIG_POSITION_INDEPENDENT=y
-CONFIG_ARCH_SNAPDRAGON=y
-CONFIG_DEFAULT_DEVICE_TREE="qcs404-evb"
-CONFIG_IDENT_STRING="\nQualcomm QCS404-EVB"
-CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=5
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="earlycon ignore_loglevel root= clk_ignore_unused"
-CONFIG_SAVE_PREV_BL_FDT_ADDR=y
-CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
-# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_SYS_MAXARGS=64
-CONFIG_SYS_CBSIZE=512
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_GPT=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_PART=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_EXT4_WRITE=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_FS_GENERIC=y
-# CONFIG_NET is not set
-CONFIG_CLK=y
-CONFIG_CLK_QCOM_QCS404=y
-CONFIG_MSM_GPIO=y
-CONFIG_QCOM_PMIC_GPIO=y
-CONFIG_MISC=y
-CONFIG_MMC_HS400_SUPPORT=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ADMA=y
-CONFIG_MMC_SDHCI_MSM=y
-CONFIG_PHY=y
-CONFIG_PHY_QCOM_USB_HS_28NM=y
-CONFIG_PHY_QCOM_USB_SS=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_QCOM_QCS404=y
-CONFIG_DM_PMIC=y
-CONFIG_PMIC_QCOM=y
-CONFIG_MSM_SERIAL=y
-CONFIG_SPMI_MSM=y
-CONFIG_USB=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_DWC3=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC3_GENERIC=y
-CONFIG_USB_STORAGE=y
-CONFIG_LMB_MAX_REGIONS=64

-- 
2.42.1