[PATCH 1/4] arm64: zynqmp: Move fixed clock to / for kv260

[Michal Simek]

fixed clock nodes can't be on the bus because they are missing reg
property. That's why move them to root.
And because it is root it is good to have it as the first node in a file.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 arch/arm/dts/zynqmp-sck-kv-g-revA.dtso | 38 ++++++++++++------------
 arch/arm/dts/zynqmp-sck-kv-g-revB.dtso | 40 ++++++++++++--------------
 2 files changed, 37 insertions(+), 41 deletions(-)

diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
index f43c159cdca9..3db420cc94bb 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dtso
@@ -27,27 +27,7 @@
 		     "xlnx,zynqmp-sk-kv260-revZ",
 		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 	model = "ZynqMP KV260 revA";
-};
-
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	u14: ina260 at 40 { /* u14 */
-		compatible = "ti,ina260";
-		#io-channel-cells = <1>;
-		label = "ina260-u14";
-		reg = <0x40>;
-	};
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
 
-&amba {
 	ina260-u14 {
 		compatible = "iio-hwmon";
 		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -90,6 +70,24 @@
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u14: ina260 at 40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 and SATA */
 &psgtr {
 	status = "okay";
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
index 3643569cc7c8..6756fdbdfe9d 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dtso
@@ -22,28 +22,7 @@
 		     "xlnx,zynqmp-sk-kv260-revB",
 		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 	model = "ZynqMP KV260 revB";
-};
-
-&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
-	#address-cells = <1>;
-	#size-cells = <0>;
-	pinctrl-names = "default", "gpio";
-	pinctrl-0 = <&pinctrl_i2c1_default>;
-	pinctrl-1 = <&pinctrl_i2c1_gpio>;
-	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
-
-	u14: ina260 at 40 { /* u14 */
-		compatible = "ti,ina260";
-		#io-channel-cells = <1>;
-		label = "ina260-u14";
-		reg = <0x40>;
-	};
-	/* u43 - 0x2d - USB hub */
-	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
-};
 
-&amba {
 	ina260-u14 {
 		compatible = "iio-hwmon";
 		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -86,6 +65,25 @@
 	};
 };
 
+&i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u14: ina260 at 40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+	/* u43 - 0x2d - USB hub */
+	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
+};
+
 /* DP/USB 3.0 */
 &psgtr {
 	status = "okay";
-- 
2.36.1