[PATCH v3 0/7] rpi5: initial support

Stefan Agner stefan at agner.ch
Thu Dec 21 14:42:27 CET 2023


Hi Ivan,

On 2023-12-18 22:03, Ivan T. Ivanov wrote:
> Hi,
> 
> These patches are adding basic support for RPi5.
> They are based on v2 series from Dmitry Malkin[1].
> 
> With them I am able to _start_ current openSUSE
> Tumbleweed without modification. They are still
> a lot of things to be added to the upstream Linux
> before it runs flawlessly on this device, but at
> least in U-Booot SD controller used for uSD card
> and Frameboffer and HDMI0 devices are working fine
> now. It seems that PCIe controller is working fine
> too, but I have not tested it too much.

Thank you very much for this work!

> 
> Serial console and reset are also functional.

I've applied the patchset to v2024.01-rc5 and built the
rpi_arm64_defconfig target. I added enable_uart=1 and kernel=u-boot.bin
to config.txt. While I see a brief U-Boot logo on HDMI, I haven't gotten
anything on the serial console on pin 8/10 of the Raspberry Pi pin
header. Is there anything specific needed to get the console going?

--
Stefan

> 
> Hopefully this will help others add missing pieces
> more easily.
> 
> Happy hacking!
> 
> Regards,
> Ivan
> 
> [1] https://lore.kernel.org/all/CAKRNjQ0dsWozGo4n8g58m4cCEk3n=qx1R+L24WBgpo-iP1yo7A@mail.gmail.com/
> 
> Dmitry Malkin (2):
>   rpi5: add initial memory map for bcm2712
>   rpi5: Use devicetree as alternative way to read IO base addresses
> 
> Ivan T. Ivanov (5):
>   rpi5: Use devicetree to retrieve board revision
>   bcm2835: brcm,bcm2708-fb device is using r5g6b5 format
>   mmc: bcmstb: Add support for bcm2712 SD controller
>   configs: rpi_arm64: enable SDHCI BCMSTB driver
>   pci: pcie-brcmstb: Add bcm2712 PCIe controller support
> 
>  arch/arm/mach-bcm283x/include/mach/base.h  |   5 +-
>  arch/arm/mach-bcm283x/include/mach/mbox.h  |   3 +-
>  arch/arm/mach-bcm283x/include/mach/sdhci.h |   3 +-
>  arch/arm/mach-bcm283x/include/mach/timer.h |   3 +-
>  arch/arm/mach-bcm283x/include/mach/wdog.h  |   3 +-
>  arch/arm/mach-bcm283x/init.c               |  81 ++++++++--
>  board/raspberrypi/rpi/rpi.c                |  22 ++-
>  configs/rpi_arm64_defconfig                |   1 +
>  drivers/mmc/bcmstb_sdhci.c                 | 173 ++++++++++++++++++++-
>  drivers/pci/pcie_brcmstb.c                 |  23 ++-
>  drivers/video/bcm2835.c                    |  10 +-
>  11 files changed, 296 insertions(+), 31 deletions(-)


More information about the U-Boot mailing list