[PATCH v2 27/32] dts: dragonboard820c: use correct bindings for clocks

[Neil Armstrong]

On 19/12/2023 17:04, Caleb Connolly wrote:
> Don't use hardcoded clock IDs, use the IDs from the dt-bindings to be
> compatible with upstream.
> 
> Signed-off-by: Caleb Connolly <caleb.connolly at linaro.org>
> ---
>   arch/arm/dts/dragonboard820c.dts | 5 +++--
>   drivers/clk/qcom/clock-apq8096.c | 5 +++--
>   2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/dts/dragonboard820c.dts b/arch/arm/dts/dragonboard820c.dts
> index 86b7f83d36d6..282c37e28f42 100644
> --- a/arch/arm/dts/dragonboard820c.dts
> +++ b/arch/arm/dts/dragonboard820c.dts
> @@ -8,6 +8,7 @@
>   /dts-v1/;
>   
>   #include "skeleton64.dtsi"
> +#include <dt-bindings/clock/qcom,gcc-msm8996.h>
>   
>   / {
>   	model = "Qualcomm Technologies, Inc. DB820c";
> @@ -78,7 +79,7 @@
>   		blsp2_uart2: serial at 75b0000 {
>   			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
>   			reg = <0x75b0000 0x1000>;
> -			clocks = <&gcc 4>;
> +			clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>;
>   			clock-names = "core";
>   			pinctrl-names = "uart";
>   			pinctrl-0 = <&blsp8_uart>;
> @@ -89,7 +90,7 @@
>   			reg = <0x74a4900 0x314>, <0x74a4000 0x800>;
>   			index = <0x0>;
>   			bus-width = <4>;
> -			clock = <&gcc 0>;
> +			clock = <&gcc GCC_SDCC1_APPS_CLK>;
>   			clock-frequency = <200000000>;
>   		 };
>   
> diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c
> index 1e6fdb5cd42d..a4731613c5e0 100644
> --- a/drivers/clk/qcom/clock-apq8096.c
> +++ b/drivers/clk/qcom/clock-apq8096.c
> @@ -13,6 +13,7 @@
>   #include <errno.h>
>   #include <asm/io.h>
>   #include <linux/bitops.h>
> +#include <dt-bindings/clock/qcom,gcc-msm8996.h>
>   
>   #include "clock-qcom.h"
>   
> @@ -107,10 +108,10 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)
>   	struct msm_clk_priv *priv = dev_get_priv(clk->dev);
>   
>   	switch (clk->id) {
> -	case 0: /* SDC1 */
> +	case GCC_SDCC1_APPS_CLK: /* SDC1 */
>   		return clk_init_sdc(priv, rate);
>   		break;
> -	case 4: /*UART2*/
> +	case GCC_BLSP2_UART2_APPS_CLK: /*UART2*/
>   		return clk_init_uart(priv);
>   	default:
>   		return 0;
> 

Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>