[PATCH 04/26] arm: dts: k3-am654: pull in dtb update from Linux
Bryan Brattlof
bb at ti.com
Thu Dec 21 18:43:50 CET 2023
Pull in dtb updates for the am654 base board from v6.7-rc1 of Linux
Signed-off-by: Bryan Brattlof <bb at ti.com>
---
arch/arm/dts/k3-am65-main.dtsi | 342 ++++++++++++++++++++++-----
arch/arm/dts/k3-am65-mcu.dtsi | 156 ++++++++++--
arch/arm/dts/k3-am65-wakeup.dtsi | 10 +-
arch/arm/dts/k3-am65.dtsi | 19 +-
arch/arm/dts/k3-am654-base-board.dts | 301 ++++++++++++++---------
arch/arm/dts/k3-am654.dtsi | 7 +
6 files changed, 626 insertions(+), 209 deletions(-)
diff --git a/arch/arm/dts/k3-am65-main.dtsi b/arch/arm/dts/k3-am65-main.dtsi
index ba4e5d3e1ed7a..5ebb87f467de5 100644
--- a/arch/arm/dts/k3-am65-main.dtsi
+++ b/arch/arm/dts/k3-am65-main.dtsi
@@ -35,7 +35,10 @@
#interrupt-cells = <3>;
interrupt-controller;
reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */
- <0x00 0x01880000 0x00 0x90000>; /* GICR */
+ <0x00 0x01880000 0x00 0x90000>, /* GICR */
+ <0x00 0x6f000000 0x00 0x2000>, /* GICC */
+ <0x00 0x6f010000 0x00 0x1000>, /* GICH */
+ <0x00 0x6f020000 0x00 0x2000>; /* GICV */
/*
* vcpumntirq:
* virtual CPU interface maintenance interrupt
@@ -88,6 +91,7 @@
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_uart1: serial at 2810000 {
@@ -96,6 +100,7 @@
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 147 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_uart2: serial at 2820000 {
@@ -104,29 +109,47 @@
interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <48000000>;
power-domains = <&k3_pds 148 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
crypto: crypto at 4e00000 {
compatible = "ti,am654-sa2ul";
reg = <0x0 0x4e00000 0x0 0x1200>;
- power-domains = <&k3_pds 136 TI_SCI_PD_EXCLUSIVE>;
+ power-domains = <&k3_pds 136 TI_SCI_PD_SHARED>;
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x04e00000 0x00 0x04e00000 0x0 0x30000>;
- dmas = <&main_udmap 0xc000>, <&main_udmap 0x4000>,
- <&main_udmap 0x4001>;
+ dmas = <&main_udmap 0xc001>, <&main_udmap 0x4002>,
+ <&main_udmap 0x4003>;
dma-names = "tx", "rx1", "rx2";
- dma-coherent;
rng: rng at 4e10000 {
compatible = "inside-secure,safexcel-eip76";
reg = <0x0 0x4e10000 0x0 0x7d>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&k3_clks 136 1>;
+ status = "disabled"; /* Used by OP-TEE */
};
};
+ /* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
+ main_timerio_input: pinctrl at 104200 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x104200 0x0 0x30>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000001ff>;
+ };
+
+ /* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
+ main_timerio_output: pinctrl at 104280 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x104280 0x0 0x20>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x0000000f>;
+ };
+
main_pmx0: pinctrl at 11c000 {
compatible = "pinctrl-single";
reg = <0x0 0x11c000 0x0 0x2e4>;
@@ -152,6 +175,7 @@
clock-names = "fck";
clocks = <&k3_clks 110 1>;
power-domains = <&k3_pds 110 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c1: i2c at 2010000 {
@@ -163,6 +187,7 @@
clock-names = "fck";
clocks = <&k3_clks 111 1>;
power-domains = <&k3_pds 111 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c2: i2c at 2020000 {
@@ -174,6 +199,7 @@
clock-names = "fck";
clocks = <&k3_clks 112 1>;
power-domains = <&k3_pds 112 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
main_i2c3: i2c at 2030000 {
@@ -185,6 +211,7 @@
clock-names = "fck";
clocks = <&k3_clks 113 1>;
power-domains = <&k3_pds 113 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
ecap0: pwm at 3100000 {
@@ -194,6 +221,7 @@
power-domains = <&k3_pds 39 TI_SCI_PD_EXCLUSIVE>;
clocks = <&k3_clks 39 0>;
clock-names = "fck";
+ status = "disabled";
};
main_spi0: spi at 2100000 {
@@ -206,6 +234,7 @@
#size-cells = <0>;
dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
dma-names = "tx0", "rx0";
+ status = "disabled";
};
main_spi1: spi at 2110000 {
@@ -218,6 +247,7 @@
#size-cells = <0>;
assigned-clocks = <&k3_clks 137 1>;
assigned-clock-rates = <48000000>;
+ status = "disabled";
};
main_spi2: spi at 2120000 {
@@ -228,6 +258,7 @@
power-domains = <&k3_pds 139 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
main_spi3: spi at 2130000 {
@@ -238,6 +269,7 @@
power-domains = <&k3_pds 140 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
main_spi4: spi at 2140000 {
@@ -248,6 +280,151 @@
power-domains = <&k3_pds 141 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
+ };
+
+ main_timer0: timer at 2400000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2400000 0x00 0x400>;
+ interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 23 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 23 0>;
+ assigned-clock-parents = <&k3_clks 23 1>;
+ power-domains = <&k3_pds 23 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer1: timer at 2410000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2410000 0x00 0x400>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 24 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 24 0>;
+ assigned-clock-parents = <&k3_clks 24 1>;
+ power-domains = <&k3_pds 24 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer2: timer at 2420000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2420000 0x00 0x400>;
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 27 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 27 0>;
+ assigned-clock-parents = <&k3_clks 27 1>;
+ power-domains = <&k3_pds 27 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer3: timer at 2430000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2430000 0x00 0x400>;
+ interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 28 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 28 0>;
+ assigned-clock-parents = <&k3_clks 28 1>;
+ power-domains = <&k3_pds 28 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer4: timer at 2440000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2440000 0x00 0x400>;
+ interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 29 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 29 0>;
+ assigned-clock-parents = <&k3_clks 29 1>;
+ power-domains = <&k3_pds 29 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer5: timer at 2450000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2450000 0x00 0x400>;
+ interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 30 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 30 0>;
+ assigned-clock-parents = <&k3_clks 30 1>;
+ power-domains = <&k3_pds 30 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer6: timer at 2460000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2460000 0x00 0x400>;
+ interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 31 0>;
+ assigned-clocks = <&k3_clks 31 0>;
+ assigned-clock-parents = <&k3_clks 31 1>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 31 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer7: timer at 2470000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2470000 0x00 0x400>;
+ interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 32 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 32 0>;
+ assigned-clock-parents = <&k3_clks 32 1>;
+ power-domains = <&k3_pds 32 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer8: timer at 2480000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2480000 0x00 0x400>;
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 33 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 33 0>;
+ assigned-clock-parents = <&k3_clks 33 1>;
+ power-domains = <&k3_pds 33 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer9: timer at 2490000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x2490000 0x00 0x400>;
+ interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 34 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 34 0>;
+ assigned-clock-parents = <&k3_clks 34 1>;
+ power-domains = <&k3_pds 34 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer10: timer at 24a0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24a0000 0x00 0x400>;
+ interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 25 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 25 0>;
+ assigned-clock-parents = <&k3_clks 25 1>;
+ power-domains = <&k3_pds 25 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ };
+
+ main_timer11: timer at 24b0000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x24b0000 0x00 0x400>;
+ interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&k3_clks 26 0>;
+ clock-names = "fck";
+ assigned-clocks = <&k3_clks 26 0>;
+ assigned-clock-parents = <&k3_clks 26 1>;
+ power-domains = <&k3_pds 26 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
};
sdhci0: mmc at 4f80000 {
@@ -292,7 +469,6 @@
ti,otap-del-sel-ddr52 = <0x4>;
ti,otap-del-sel-hs200 = <0x7>;
ti,clkbuf-sel = <0x7>;
- ti,otap-del-sel = <0x2>;
ti,trm-icp = <0x8>;
dma-coherent;
};
@@ -304,21 +480,6 @@
#size-cells = <1>;
ranges = <0x0 0x0 0x00100000 0x1c000>;
- pcie0_mode: pcie-mode at 4060 {
- compatible = "syscon";
- reg = <0x00004060 0x4>;
- };
-
- pcie1_mode: pcie-mode at 4070 {
- compatible = "syscon";
- reg = <0x00004070 0x4>;
- };
-
- pcie_devid: pcie-devid at 210 {
- compatible = "syscon";
- reg = <0x00000210 0x4>;
- };
-
serdes0_clk: clock at 4080 {
compatible = "syscon";
reg = <0x00004080 0x4>;
@@ -338,11 +499,11 @@
dss_oldi_io_ctrl: dss-oldi-io-ctrl at 41e0 {
compatible = "syscon";
- reg = <0x0000041e0 0x14>;
+ reg = <0x000041e0 0x14>;
};
- ehrpwm_tbclk: clock at 4140 {
- compatible = "ti,am654-ehrpwm-tbclk", "syscon";
+ ehrpwm_tbclk: clock-controller at 4140 {
+ compatible = "ti,am654-ehrpwm-tbclk";
reg = <0x4140 0x18>;
#clock-cells = <1>;
};
@@ -439,7 +600,7 @@
};
main_navss: bus at 30800000 {
- compatible = "simple-mfd";
+ compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x0 0x30800000 0x0 0x30800000 0x0 0xbc00000>;
@@ -497,6 +658,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster1: mailbox at 31f81000 {
@@ -506,6 +668,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster2: mailbox at 31f82000 {
@@ -515,6 +678,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster3: mailbox at 31f83000 {
@@ -524,6 +688,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster4: mailbox at 31f84000 {
@@ -533,6 +698,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster5: mailbox at 31f85000 {
@@ -542,6 +708,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster6: mailbox at 31f86000 {
@@ -551,6 +718,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster7: mailbox at 31f87000 {
@@ -560,6 +728,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster8: mailbox at 31f88000 {
@@ -569,6 +738,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster9: mailbox at 31f89000 {
@@ -578,6 +748,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster10: mailbox at 31f8a000 {
@@ -587,6 +758,7 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
mailbox0_cluster11: mailbox at 31f8b000 {
@@ -596,15 +768,17 @@
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <16>;
interrupt-parent = <&intr_main_navss>;
+ status = "disabled";
};
ringacc: ringacc at 3c000000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x3c000000 0x0 0x400000>,
- <0x0 0x38000000 0x0 0x400000>,
- <0x0 0x31120000 0x0 0x100>,
- <0x0 0x33000000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ reg = <0x0 0x3c000000 0x0 0x400000>,
+ <0x0 0x38000000 0x0 0x400000>,
+ <0x0 0x31120000 0x0 0x100>,
+ <0x0 0x33000000 0x0 0x40000>,
+ <0x0 0x31080000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target", "cfg";
ti,num-rings = <818>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
@@ -614,9 +788,9 @@
main_udmap: dma-controller at 31150000 {
compatible = "ti,am654-navss-main-udmap";
- reg = <0x0 0x31150000 0x0 0x100>,
- <0x0 0x34000000 0x0 0x100000>,
- <0x0 0x35000000 0x0 0x100000>;
+ reg = <0x0 0x31150000 0x0 0x100>,
+ <0x0 0x34000000 0x0 0x100000>,
+ <0x0 0x35000000 0x0 0x100000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&inta_main_udmass>;
#dma-cells = <1>;
@@ -687,15 +861,15 @@
pcie0_rc: pcie at 5500000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000
- 0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&pcie_devid>;
- ti,syscon-pcie-mode = <&pcie0_mode>;
+ ranges = <0x81000000 0 0 0x0 0x10020000 0 0x00010000>,
+ <0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&scm_conf 0x210>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4060>;
bus-range = <0x0 0xff>;
num-viewport = <16>;
max-link-speed = <2>;
@@ -703,32 +877,34 @@
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
msi-map = <0x0 &gic_its 0x0 0x10000>;
device_type = "pci";
+ status = "disabled";
};
pcie0_ep: pcie-ep at 5500000 {
compatible = "ti,am654-pcie-ep";
- reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+ reg = <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
- ti,syscon-pcie-mode = <&pcie0_mode>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4060>;
num-ib-windows = <16>;
num-ob-windows = <16>;
max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
};
pcie1_rc: pcie at 5600000 {
compatible = "ti,am654-pcie-rc";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "config", "atu";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <3>;
#size-cells = <2>;
- ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000
- 0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
- ti,syscon-pcie-id = <&pcie_devid>;
- ti,syscon-pcie-mode = <&pcie1_mode>;
+ ranges = <0x81000000 0 0 0x0 0x18020000 0 0x00010000>,
+ <0x82000000 0 0x18030000 0x0 0x18030000 0 0x07FD0000>;
+ ti,syscon-pcie-id = <&scm_conf 0x210>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4070>;
bus-range = <0x0 0xff>;
num-viewport = <16>;
max-link-speed = <2>;
@@ -736,19 +912,21 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
msi-map = <0x0 &gic_its 0x10000 0x10000>;
device_type = "pci";
+ status = "disabled";
};
pcie1_ep: pcie-ep at 5600000 {
compatible = "ti,am654-pcie-ep";
- reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+ reg = <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
reg-names = "app", "dbics", "addr_space", "atu";
power-domains = <&k3_pds 121 TI_SCI_PD_EXCLUSIVE>;
- ti,syscon-pcie-mode = <&pcie1_mode>;
+ ti,syscon-pcie-mode = <&scm_conf 0x4070>;
num-ib-windows = <16>;
num-ob-windows = <16>;
max-link-speed = <2>;
dma-coherent;
interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+ status = "disabled";
};
mcasp0: mcasp at 2b00000 {
@@ -766,6 +944,7 @@
clocks = <&k3_clks 104 0>;
clock-names = "fck";
power-domains = <&k3_pds 104 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcasp1: mcasp at 2b10000 {
@@ -783,6 +962,7 @@
clocks = <&k3_clks 105 0>;
clock-names = "fck";
power-domains = <&k3_pds 105 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcasp2: mcasp at 2b20000 {
@@ -800,6 +980,7 @@
clocks = <&k3_clks 106 0>;
clock-names = "fck";
power-domains = <&k3_pds 106 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
cal: cal at 6f03000 {
@@ -826,13 +1007,13 @@
dss: dss at 4a00000 {
compatible = "ti,am65x-dss";
- reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
- <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
- <0x0 0x04a06000 0x0 0x1000>, /* vid */
- <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
- <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
- <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
- <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
+ reg = <0x0 0x04a00000 0x0 0x1000>, /* common */
+ <0x0 0x04a02000 0x0 0x1000>, /* vidl1 */
+ <0x0 0x04a06000 0x0 0x1000>, /* vid */
+ <0x0 0x04a07000 0x0 0x1000>, /* ovr1 */
+ <0x0 0x04a08000 0x0 0x1000>, /* ovr2 */
+ <0x0 0x04a0a000 0x0 0x1000>, /* vp1 */
+ <0x0 0x04a0b000 0x0 0x1000>; /* vp2 */
reg-names = "common", "vidl1", "vid",
"ovr1", "ovr2", "vp1", "vp2";
@@ -840,9 +1021,9 @@
power-domains = <&k3_pds 67 TI_SCI_PD_EXCLUSIVE>;
- clocks = <&k3_clks 67 1>,
- <&k3_clks 216 1>,
- <&k3_clks 67 2>;
+ clocks = <&k3_clks 67 1>,
+ <&k3_clks 216 1>,
+ <&k3_clks 67 2>;
clock-names = "fck", "vp1", "vp2";
/*
@@ -870,6 +1051,7 @@
power-domains = <&k3_pds 40 TI_SCI_PD_EXCLUSIVE>;
clocks = <&ehrpwm_tbclk 0>, <&k3_clks 40 0>;
clock-names = "tbclk", "fck";
+ status = "disabled";
};
ehrpwm1: pwm at 3010000 {
@@ -879,6 +1061,7 @@
power-domains = <&k3_pds 41 TI_SCI_PD_EXCLUSIVE>;
clocks = <&ehrpwm_tbclk 1>, <&k3_clks 41 0>;
clock-names = "tbclk", "fck";
+ status = "disabled";
};
ehrpwm2: pwm at 3020000 {
@@ -888,6 +1071,7 @@
power-domains = <&k3_pds 42 TI_SCI_PD_EXCLUSIVE>;
clocks = <&ehrpwm_tbclk 2>, <&k3_clks 42 0>;
clock-names = "tbclk", "fck";
+ status = "disabled";
};
ehrpwm3: pwm at 3030000 {
@@ -897,6 +1081,7 @@
power-domains = <&k3_pds 43 TI_SCI_PD_EXCLUSIVE>;
clocks = <&ehrpwm_tbclk 3>, <&k3_clks 43 0>;
clock-names = "tbclk", "fck";
+ status = "disabled";
};
ehrpwm4: pwm at 3040000 {
@@ -906,6 +1091,7 @@
power-domains = <&k3_pds 44 TI_SCI_PD_EXCLUSIVE>;
clocks = <&ehrpwm_tbclk 4>, <&k3_clks 44 0>;
clock-names = "tbclk", "fck";
+ status = "disabled";
};
ehrpwm5: pwm at 3050000 {
@@ -915,6 +1101,7 @@
power-domains = <&k3_pds 45 TI_SCI_PD_EXCLUSIVE>;
clocks = <&ehrpwm_tbclk 5>, <&k3_clks 45 0>;
clock-names = "tbclk", "fck";
+ status = "disabled";
};
icssg0: icssg at b000000 {
@@ -964,6 +1151,18 @@
};
};
+ icssg0_iep0: iep at 2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg0_iepclk_mux>;
+ };
+
+ icssg0_iep1: iep at 2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg0_iepclk_mux>;
+ };
+
icssg0_mii_rt: mii-rt at 32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1055,6 +1254,7 @@
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
+ status = "disabled";
};
};
@@ -1105,6 +1305,18 @@
};
};
+ icssg1_iep0: iep at 2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg1_iepclk_mux>;
+ };
+
+ icssg1_iep1: iep at 2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg1_iepclk_mux>;
+ };
+
icssg1_mii_rt: mii-rt at 32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1196,6 +1408,7 @@
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
+ status = "disabled";
};
};
@@ -1246,6 +1459,18 @@
};
};
+ icssg2_iep0: iep at 2e000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2e000 0x1000>;
+ clocks = <&icssg2_iepclk_mux>;
+ };
+
+ icssg2_iep1: iep at 2f000 {
+ compatible = "ti,am654-icss-iep";
+ reg = <0x2f000 0x1000>;
+ clocks = <&icssg2_iepclk_mux>;
+ };
+
icssg2_mii_rt: mii-rt at 32000 {
compatible = "ti,pruss-mii", "syscon";
reg = <0x32000 0x100>;
@@ -1337,6 +1562,7 @@
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
+ status = "disabled";
};
};
};
diff --git a/arch/arm/dts/k3-am65-mcu.dtsi b/arch/arm/dts/k3-am65-mcu.dtsi
index c93ff1520a0e2..edd5cfbec40e6 100644
--- a/arch/arm/dts/k3-am65-mcu.dtsi
+++ b/arch/arm/dts/k3-am65-mcu.dtsi
@@ -20,13 +20,32 @@
};
};
+ /* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
+ mcu_timerio_input: pinctrl at 40f04200 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x40f04200 0x0 0x10>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x00000101>;
+ };
+
+ /* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
+ mcu_timerio_output: pinctrl at 40f04280 {
+ compatible = "pinctrl-single";
+ reg = <0x0 0x40f04280 0x0 0x8>;
+ #pinctrl-cells = <1>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x00000003>;
+ };
+
mcu_uart0: serial at 40a00000 {
compatible = "ti,am654-uart";
- reg = <0x00 0x40a00000 0x00 0x100>;
- interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
- clock-frequency = <96000000>;
- current-speed = <115200>;
- power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+ reg = <0x00 0x40a00000 0x00 0x100>;
+ interrupts = <GIC_SPI 565 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <96000000>;
+ current-speed = <115200>;
+ power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcu_ram: sram at 41c00000 {
@@ -46,6 +65,7 @@
clock-names = "fck";
clocks = <&k3_clks 114 1>;
power-domains = <&k3_pds 114 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
mcu_spi0: spi at 40300000 {
@@ -56,6 +76,7 @@
power-domains = <&k3_pds 142 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
mcu_spi1: spi at 40310000 {
@@ -66,6 +87,7 @@
power-domains = <&k3_pds 143 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
mcu_spi2: spi at 40320000 {
@@ -76,6 +98,7 @@
power-domains = <&k3_pds 144 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
tscadc0: tscadc at 40200000 {
@@ -85,10 +108,11 @@
clocks = <&k3_clks 0 2>;
assigned-clocks = <&k3_clks 0 2>;
assigned-clock-rates = <60000000>;
- clock-names = "adc_tsc_fck";
+ clock-names = "fck";
dmas = <&mcu_udmap 0x7100>,
<&mcu_udmap 0x7101 >;
dma-names = "fifo0", "fifo1";
+ status = "disabled";
adc {
#io-channel-cells = <1>;
@@ -103,10 +127,11 @@
clocks = <&k3_clks 1 2>;
assigned-clocks = <&k3_clks 1 2>;
assigned-clock-rates = <60000000>;
- clock-names = "adc_tsc_fck";
+ clock-names = "fck";
dmas = <&mcu_udmap 0x7102>,
<&mcu_udmap 0x7103>;
dma-names = "fifo0", "fifo1";
+ status = "disabled";
adc {
#io-channel-cells = <1>;
@@ -114,8 +139,53 @@
};
};
+ /*
+ * The MCU domain timer interrupts are routed only to the ESM module,
+ * and not currently available for Linux. The MCU domain timers are
+ * of limited use without interrupts, and likely reserved by the ESM.
+ */
+ mcu_timer0: timer at 40400000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40400000 0x00 0x400>;
+ clocks = <&k3_clks 35 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 35 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ status = "reserved";
+ };
+
+ mcu_timer1: timer at 40410000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40410000 0x00 0x400>;
+ clocks = <&k3_clks 36 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 36 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ status = "reserved";
+ };
+
+ mcu_timer2: timer at 40420000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40420000 0x00 0x400>;
+ clocks = <&k3_clks 37 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 37 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ status = "reserved";
+ };
+
+ mcu_timer3: timer at 40430000 {
+ compatible = "ti,am654-timer";
+ reg = <0x00 0x40430000 0x00 0x400>;
+ clocks = <&k3_clks 38 0>;
+ clock-names = "fck";
+ power-domains = <&k3_pds 38 TI_SCI_PD_EXCLUSIVE>;
+ ti,timer-pwm;
+ status = "reserved";
+ };
+
mcu_navss: bus at 28380000 {
- compatible = "simple-mfd";
+ compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>;
@@ -126,11 +196,13 @@
mcu_ringacc: ringacc at 2b800000 {
compatible = "ti,am654-navss-ringacc";
- reg = <0x0 0x2b800000 0x0 0x400000>,
- <0x0 0x2b000000 0x0 0x400000>,
- <0x0 0x28590000 0x0 0x100>,
- <0x0 0x2a500000 0x0 0x40000>;
- reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
+ reg = <0x0 0x2b800000 0x0 0x400000>,
+ <0x0 0x2b000000 0x0 0x400000>,
+ <0x0 0x28590000 0x0 0x100>,
+ <0x0 0x2a500000 0x0 0x40000>,
+ <0x0 0x28440000 0x0 0x40000>;
+ reg-names = "rt", "fifos", "proxy_gcfg",
+ "proxy_target", "cfg";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
@@ -140,9 +212,9 @@
mcu_udmap: dma-controller at 285c0000 {
compatible = "ti,am654-navss-mcu-udmap";
- reg = <0x0 0x285c0000 0x0 0x100>,
- <0x0 0x2a800000 0x0 0x40000>,
- <0x0 0x2aa00000 0x0 0x40000>;
+ reg = <0x0 0x285c0000 0x0 0x100>,
+ <0x0 0x2a800000 0x0 0x40000>,
+ <0x0 0x2aa00000 0x0 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
msi-parent = <&inta_main_udmass>;
#dma-cells = <1>;
@@ -159,7 +231,54 @@
};
};
- fss: fss at 47000000 {
+ secure_proxy_mcu: mailbox at 2a480000 {
+ compatible = "ti,am654-secure-proxy";
+ #mbox-cells = <1>;
+ reg-names = "target_data", "rt", "scfg";
+ reg = <0x0 0x2a480000 0x0 0x80000>,
+ <0x0 0x2a380000 0x0 0x80000>,
+ <0x0 0x2a400000 0x0 0x80000>;
+ /*
+ * Marked Disabled:
+ * Node is incomplete as it is meant for bootloaders and
+ * firmware on non-MPU processors
+ */
+ status = "disabled";
+ };
+
+ m_can0: can at 40528000 {
+ compatible = "bosch,m_can";
+ reg = <0x0 0x40528000 0x0 0x400>,
+ <0x0 0x40500000 0x0 0x4400>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 102 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 102 5>, <&k3_clks 102 0>;
+ clock-names = "hclk", "cclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 545 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ m_can1: can at 40568000 {
+ compatible = "bosch,m_can";
+ reg = <0x0 0x40568000 0x0 0x400>,
+ <0x0 0x40540000 0x0 0x4400>;
+ reg-names = "m_can", "message_ram";
+ power-domains = <&k3_pds 103 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 103 5>, <&k3_clks 103 0>;
+ clock-names = "hclk", "cclk";
+ interrupt-parent = <&gic500>;
+ interrupts = <GIC_SPI 547 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 548 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "int0", "int1";
+ bosch,mram-cfg = <0x0 128 64 64 64 64 32 32>;
+ status = "disabled";
+ };
+
+ fss: bus at 47000000 {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
@@ -180,6 +299,7 @@
power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
ospi1: spi at 47050000 {
@@ -194,6 +314,7 @@
power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
#address-cells = <1>;
#size-cells = <0>;
+ status = "disabled";
};
};
@@ -243,6 +364,7 @@
clocks = <&k3_clks 5 10>;
clock-names = "fck";
bus_freq = <1000000>;
+ status = "disabled";
};
cpts at 3d000 {
diff --git a/arch/arm/dts/k3-am65-wakeup.dtsi b/arch/arm/dts/k3-am65-wakeup.dtsi
index 9d21cdf6fce8f..fd2b998ebddc4 100644
--- a/arch/arm/dts/k3-am65-wakeup.dtsi
+++ b/arch/arm/dts/k3-am65-wakeup.dtsi
@@ -12,8 +12,8 @@
mbox-names = "rx", "tx";
- mboxes= <&secure_proxy_main 11>,
- <&secure_proxy_main 13>;
+ mboxes = <&secure_proxy_main 11>,
+ <&secure_proxy_main 13>;
reg-names = "debug_messages";
reg = <0x44083000 0x1000>;
@@ -54,6 +54,7 @@
clock-frequency = <48000000>;
current-speed = <115200>;
power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
wkup_i2c0: i2c at 42120000 {
@@ -65,6 +66,7 @@
clock-names = "fck";
clocks = <&k3_clks 115 1>;
power-domains = <&k3_pds 115 TI_SCI_PD_EXCLUSIVE>;
+ status = "disabled";
};
intr_wkup_gpio: interrupt-controller at 42200000 {
@@ -100,8 +102,4 @@
power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
#thermal-sensor-cells = <1>;
};
-
- thermal_zones: thermal-zones {
- #include "k3-am654-industrial-thermal.dtsi"
- };
};
diff --git a/arch/arm/dts/k3-am65.dtsi b/arch/arm/dts/k3-am65.dtsi
index a9fc1af03f27f..4d7b6155a76b7 100644
--- a/arch/arm/dts/k3-am65.dtsi
+++ b/arch/arm/dts/k3-am65.dtsi
@@ -8,9 +8,10 @@
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/pinctrl/k3.h>
#include <dt-bindings/soc/ti,sci_pm_domain.h>
+#include "k3-pinctrl.h"
+
/ {
model = "Texas Instruments K3 AM654 SoC";
compatible = "ti,am654";
@@ -18,21 +19,6 @@
#address-cells = <2>;
#size-cells = <2>;
- aliases {
- serial0 = &wkup_uart0;
- serial1 = &mcu_uart0;
- serial2 = &main_uart0;
- serial3 = &main_uart1;
- serial4 = &main_uart2;
- i2c0 = &wkup_i2c0;
- i2c1 = &mcu_i2c0;
- i2c2 = &main_i2c0;
- i2c3 = &main_i2c1;
- i2c4 = &main_i2c2;
- i2c5 = &main_i2c3;
- ethernet0 = &cpsw_port1;
- };
-
chosen { };
firmware {
@@ -84,6 +70,7 @@
<0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
<0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
<0x00 0x50000000 0x00 0x50000000 0x00 0x8000000>,
+ <0x00 0x6f000000 0x00 0x6f000000 0x00 0x00310000>, /* A53 PERIPHBASE */
<0x00 0x70000000 0x00 0x70000000 0x00 0x200000>,
<0x05 0x00000000 0x05 0x00000000 0x01 0x0000000>,
<0x07 0x00000000 0x07 0x00000000 0x01 0x0000000>;
diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts
index cfbcebfa37c1d..1637ec5ab5eda 100644
--- a/arch/arm/dts/k3-am654-base-board.dts
+++ b/arch/arm/dts/k3-am654-base-board.dts
@@ -10,12 +10,25 @@
#include <dt-bindings/net/ti-dp83867.h>
/ {
- compatible = "ti,am654-evm", "ti,am654";
+ compatible = "ti,am654-evm", "ti,am654";
model = "Texas Instruments AM654 Base Board";
+ aliases {
+ serial0 = &wkup_uart0;
+ serial1 = &mcu_uart0;
+ serial2 = &main_uart0;
+ i2c0 = &wkup_i2c0;
+ i2c1 = &mcu_i2c0;
+ i2c2 = &main_i2c0;
+ i2c3 = &main_i2c1;
+ i2c4 = &main_i2c2;
+ ethernet0 = &cpsw_port1;
+ mmc0 = &sdhci0;
+ mmc1 = &sdhci1;
+ };
+
chosen {
stdout-path = "serial2:115200n8";
- bootargs = "earlycon=ns16550a,mmio32,0x02800000";
};
memory at 80000000 {
@@ -73,20 +86,20 @@
pinctrl-names = "default";
pinctrl-0 = <&push_button_pins_default>;
- sw5 {
+ switch-5 {
label = "GPIO Key USER1";
linux,code = <BTN_0>;
gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
};
- sw6 {
+ switch-6 {
label = "GPIO Key USER2";
linux,code = <BTN_1>;
gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
};
};
- evm_12v0: fixedregulator-evm12v0 {
+ evm_12v0: regulator-0 {
/* main supply */
compatible = "regulator-fixed";
regulator-name = "evm_12v0";
@@ -96,7 +109,7 @@
regulator-boot-on;
};
- vcc3v3_io: fixedregulator-vcc3v3io {
+ vcc3v3_io: regulator-1 {
/* Output of TPS54334 */
compatible = "regulator-fixed";
regulator-name = "vcc3v3_io";
@@ -107,7 +120,7 @@
vin-supply = <&evm_12v0>;
};
- vdd_mmc1_sd: fixedregulator-sd {
+ vdd_mmc1_sd: regulator-2 {
compatible = "regulator-fixed";
regulator-name = "vdd_mmc1_sd";
regulator-min-microvolt = <3300000>;
@@ -117,24 +130,53 @@
vin-supply = <&vcc3v3_io>;
gpio = <&pca9554 4 GPIO_ACTIVE_HIGH>;
};
+
+ vtt_supply: regulator-3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vtt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&ddr_vtt_pins_default>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc3v3_io>;
+ gpio = <&wkup_gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
};
&wkup_pmx0 {
- wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+ wkup_uart0_pins_default: wkup-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00a0, PIN_INPUT, 0) /* (AB1) WKUP_UART0_RXD */
+ AM65X_WKUP_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (AB5) WKUP_UART0_TXD */
+ AM65X_WKUP_IOPAD(0x00c8, PIN_INPUT, 1) /* (AC2) WKUP_GPIO0_6.WKUP_UART0_CTSn */
+ AM65X_WKUP_IOPAD(0x00cc, PIN_OUTPUT, 1) /* (AC1) WKUP_GPIO0_7.WKUP_UART0_RTSn */
+ >;
+ };
+
+ ddr_vtt_pins_default: ddr-vtt-default-pins {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0040, PIN_OUTPUT_PULLUP, 7) /* WKUP_GPIO0_28 */
+ >;
+ };
+
+ wkup_i2c0_pins_default: wkup-i2c0-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x00e0, PIN_INPUT, 0) /* (AC7) WKUP_I2C0_SCL */
AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
>;
};
- push_button_pins_default: push-button-pins-default {
+ push_button_pins_default: push-button-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
>;
};
- mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-pins-default {
+ mcu_fss0_ospi0_pins_default: mcu-fss0-ospi0-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0000, PIN_OUTPUT, 0) /* (V1) MCU_OSPI0_CLK */
AM65X_WKUP_IOPAD(0x0008, PIN_INPUT, 0) /* (U2) MCU_OSPI0_DQS */
@@ -150,13 +192,22 @@
>;
};
- wkup_pca554_default: wkup-pca554-default {
+ wkup_pca554_default: wkup-pca554-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
>;
};
- mcu_cpsw_pins_default: mcu-cpsw-pins-default {
+ mcu_uart0_pins_default: mcu-uart0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x0044, PIN_INPUT, 4) /* (P4) MCU_OSPI1_D1.MCU_UART0_RXD */
+ AM65X_WKUP_IOPAD(0x0048, PIN_OUTPUT, 4) /* (P5) MCU_OSPI1_D2.MCU_UART0_TXD */
+ AM65X_WKUP_IOPAD(0x004C, PIN_INPUT, 4) /* (P1) MCU_OSPI1_D3.MCU_UART0_CTSn */
+ AM65X_WKUP_IOPAD(0x0054, PIN_OUTPUT, 4) /* (N3) MCU_OSPI1_CSn1.MCU_UART0_RTSn */
+ >;
+ };
+
+ mcu_cpsw_pins_default: mcu-cpsw-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
AM65X_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
@@ -173,16 +224,23 @@
>;
};
- mcu_mdio_pins_default: mcu-mdio1-pins-default {
+ mcu_mdio_pins_default: mcu-mdio1-default-pins {
pinctrl-single,pins = <
AM65X_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
AM65X_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
>;
};
+
+ mcu_i2c0_pins_default: mcu-i2c0-default-pins {
+ pinctrl-single,pins = <
+ AM65X_WKUP_IOPAD(0x00e8, PIN_INPUT, 0) /* (AD8) MCU_I2C0_SCL */
+ AM65X_WKUP_IOPAD(0x00ec, PIN_INPUT, 0) /* (AD7) MCU_I2C0_SDA */
+ >;
+ };
};
&main_pmx0 {
- main_uart0_pins_default: main-uart0-pins-default {
+ main_uart0_pins_default: main-uart0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01e4, PIN_INPUT, 0) /* (AF11) UART0_RXD */
AM65X_IOPAD(0x01e8, PIN_OUTPUT, 0) /* (AE11) UART0_TXD */
@@ -191,14 +249,14 @@
>;
};
- main_i2c2_pins_default: main-i2c2-pins-default {
+ main_i2c2_pins_default: main-i2c2-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0074, PIN_INPUT, 5) /* (T27) GPMC0_CSn3.I2C2_SCL */
AM65X_IOPAD(0x0070, PIN_INPUT, 5) /* (R25) GPMC0_CSn2.I2C2_SDA */
>;
};
- main_spi0_pins_default: main-spi0-pins-default {
+ main_spi0_pins_default: main-spi0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01c4, PIN_INPUT, 0) /* (AH13) SPI0_CLK */
AM65X_IOPAD(0x01c8, PIN_INPUT, 0) /* (AE13) SPI0_D0 */
@@ -207,7 +265,7 @@
>;
};
- main_mmc0_pins_default: main-mmc0-pins-default {
+ main_mmc0_pins_default: main-mmc0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x01a8, PIN_INPUT_PULLDOWN, 0) /* (B25) MMC0_CLK */
AM65X_IOPAD(0x01ac, PIN_INPUT_PULLUP, 0) /* (B27) MMC0_CMD */
@@ -224,7 +282,7 @@
>;
};
- main_mmc1_pins_default: main-mmc1-pins-default {
+ main_mmc1_pins_default: main-mmc1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x02d4, PIN_INPUT_PULLDOWN, 0) /* (C27) MMC1_CLK */
AM65X_IOPAD(0x02d8, PIN_INPUT_PULLUP, 0) /* (C28) MMC1_CMD */
@@ -237,7 +295,7 @@
>;
};
- usb1_pins_default: usb1-pins-default {
+ usb1_pins_default: usb1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x02c0, PIN_OUTPUT, 0) /* (AC8) USB1_DRVVBUS */
>;
@@ -245,21 +303,21 @@
};
&main_pmx1 {
- main_i2c0_pins_default: main-i2c0-pins-default {
+ main_i2c0_pins_default: main-i2c0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0000, PIN_INPUT, 0) /* (D20) I2C0_SCL */
AM65X_IOPAD(0x0004, PIN_INPUT, 0) /* (C21) I2C0_SDA */
>;
};
- main_i2c1_pins_default: main-i2c1-pins-default {
+ main_i2c1_pins_default: main-i2c1-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0008, PIN_INPUT, 0) /* (B21) I2C1_SCL */
AM65X_IOPAD(0x000c, PIN_INPUT, 0) /* (E21) I2C1_SDA */
>;
};
- ecap0_pins_default: ecap0-pins-default {
+ ecap0_pins_default: ecap0-default-pins {
pinctrl-single,pins = <
AM65X_IOPAD(0x0010, PIN_INPUT, 0) /* (D21) ECAP0_IN_APWM_OUT */
>;
@@ -269,19 +327,55 @@
&wkup_uart0 {
/* Wakeup UART is used by System firmware */
status = "reserved";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wkup_uart0_pins_default>;
+};
+
+&mcu_uart0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_uart0_pins_default>;
};
&main_uart0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
};
&wkup_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&wkup_i2c0_pins_default>;
clock-frequency = <400000>;
+ eeprom at 50 {
+ /* AT24CM01 */
+ compatible = "atmel,24c1024";
+ reg = <0x50>;
+ };
+
+ vdd_mpu: regulator at 60 {
+ compatible = "ti,tps62363";
+ reg = <0x60>;
+ regulator-name = "VDD_MPU";
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1770000>;
+ regulator-always-on;
+ regulator-boot-on;
+ ti,vsel0-state-high;
+ ti,vsel1-state-high;
+ ti,enable-vout-discharge;
+ };
+
+ gpio at 38 {
+ compatible = "nxp,pca9554";
+ reg = <0x38>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
pca9554: gpio at 39 {
compatible = "nxp,pca9554";
reg = <0x39>;
@@ -296,7 +390,15 @@
};
};
+&mcu_i2c0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_i2c0_pins_default>;
+ clock-frequency = <400000>;
+};
+
&main_i2c0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
@@ -310,37 +412,39 @@
};
&main_i2c1 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c1_pins_default>;
clock-frequency = <400000>;
};
&main_i2c2 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_i2c2_pins_default>;
clock-frequency = <400000>;
};
&ecap0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&ecap0_pins_default>;
};
&main_spi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_spi0_pins_default>;
#address-cells = <1>;
- #size-cells= <0>;
+ #size-cells = <0>;
ti,pindir-d0-out-d1-in;
- flash at 0{
+ flash at 0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <1>;
spi-max-frequency = <48000000>;
- #address-cells = <1>;
- #size-cells= <1>;
};
};
@@ -381,12 +485,14 @@
};
&tscadc0 {
+ status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
};
&tscadc1 {
+ status = "okay";
adc {
ti,adc-channels = <0 1 2 3 4 5 6 7>;
};
@@ -400,23 +506,8 @@
status = "disabled";
};
-&pcie0_rc {
- status = "disabled";
-};
-
-&pcie0_ep {
- status = "disabled";
-};
-
-&pcie1_rc {
- status = "disabled";
-};
-
-&pcie1_ep {
- status = "disabled";
-};
-
&mailbox0_cluster0 {
+ status = "okay";
interrupts = <436>;
mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
@@ -426,6 +517,7 @@
};
&mailbox0_cluster1 {
+ status = "okay";
interrupts = <432>;
mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
@@ -434,63 +526,24 @@
};
};
-&mailbox0_cluster2 {
- status = "disabled";
-};
-
-&mailbox0_cluster3 {
- status = "disabled";
-};
-
-&mailbox0_cluster4 {
- status = "disabled";
-};
-
-&mailbox0_cluster5 {
- status = "disabled";
-};
-
-&mailbox0_cluster6 {
- status = "disabled";
-};
-
-&mailbox0_cluster7 {
- status = "disabled";
-};
-
-&mailbox0_cluster8 {
- status = "disabled";
-};
-
-&mailbox0_cluster9 {
- status = "disabled";
-};
-
-&mailbox0_cluster10 {
- status = "disabled";
-};
-
-&mailbox0_cluster11 {
- status = "disabled";
-};
-
&mcu_r5fss0_core0 {
memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
<&mcu_r5fss0_core0_memory_region>;
- mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+ mboxes = <&mailbox0_cluster0>, <&mbox_mcu_r5fss0_core0>;
};
&mcu_r5fss0_core1 {
memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
<&mcu_r5fss0_core1_memory_region>;
- mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+ mboxes = <&mailbox0_cluster1>, <&mbox_mcu_r5fss0_core1>;
};
&ospi0 {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
- flash at 0{
+ flash at 0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-tx-bus-width = <8>;
@@ -501,17 +554,65 @@
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
- #address-cells = <1>;
- #size-cells = <1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "ospi.tiboot3";
+ reg = <0x0 0x80000>;
+ };
+
+ partition at 80000 {
+ label = "ospi.tispl";
+ reg = <0x80000 0x200000>;
+ };
+
+ partition at 280000 {
+ label = "ospi.u-boot";
+ reg = <0x280000 0x400000>;
+ };
+
+ partition at 680000 {
+ label = "ospi.env";
+ reg = <0x680000 0x20000>;
+ };
+
+ partition at 6a0000 {
+ label = "ospi.env.backup";
+ reg = <0x6a0000 0x20000>;
+ };
+
+ partition at 6c0000 {
+ label = "ospi.sysfw";
+ reg = <0x6c0000 0x100000>;
+ };
+
+ partition at 800000 {
+ label = "ospi.rootfs";
+ reg = <0x800000 0x37c0000>;
+ };
+
+ partition at 3fe0000 {
+ label = "ospi.phypattern";
+ reg = <0x3fe0000 0x20000>;
+ };
+ };
};
};
&mcu_cpsw {
pinctrl-names = "default";
- pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
+ pinctrl-0 = <&mcu_cpsw_pins_default>;
};
&davinci_mdio {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_mdio_pins_default>;
+
phy0: ethernet-phy at 0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
@@ -524,30 +625,6 @@
phy-handle = <&phy0>;
};
-&mcasp0 {
- status = "disabled";
-};
-
-&mcasp1 {
- status = "disabled";
-};
-
-&mcasp2 {
- status = "disabled";
-};
-
&dss {
status = "disabled";
};
-
-&icssg0_mdio {
- status = "disabled";
-};
-
-&icssg1_mdio {
- status = "disabled";
-};
-
-&icssg2_mdio {
- status = "disabled";
-};
diff --git a/arch/arm/dts/k3-am654.dtsi b/arch/arm/dts/k3-am654.dtsi
index f0a6541b80428..888567b921f0a 100644
--- a/arch/arm/dts/k3-am654.dtsi
+++ b/arch/arm/dts/k3-am654.dtsi
@@ -93,6 +93,7 @@
L2_0: l2-cache0 {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
@@ -102,6 +103,7 @@
L2_1: l2-cache1 {
compatible = "cache";
cache-level = <2>;
+ cache-unified;
cache-size = <0x80000>;
cache-line-size = <64>;
cache-sets = <512>;
@@ -111,5 +113,10 @@
msmc_l3: l3-cache0 {
compatible = "cache";
cache-level = <3>;
+ cache-unified;
+ };
+
+ thermal_zones: thermal-zones {
+ #include "k3-am654-industrial-thermal.dtsi"
};
};
--
2.43.0
More information about the U-Boot
mailing list