[PATHv2 8/9] omap3: use device specific naming for mem_init

[Maxim Uvarov]

On Tue, 26 Dec 2023 at 04:49, Sean Anderson <seanga2 at gmail.com> wrote:

> On 12/25/23 10:39, Maxim Uvarov wrote:
> > Use device specific naming for functions so as to not overlap
> > with common function names.
> >
> > Signed-off-by: Maxim Uvarov <maxim.uvarov at linaro.org>
> > Reviewed-by: Tom Rini <trini at konsulko.com>
> > ---
> >   arch/arm/include/asm/arch-omap3/mem.h | 2 +-
> >   arch/arm/mach-omap2/omap3/board.c     | 2 +-
> >   arch/arm/mach-omap2/omap3/emif4.c     | 4 ++--
> >   arch/arm/mach-omap2/omap3/sdrc.c      | 6 +++---
> >   4 files changed, 7 insertions(+), 7 deletions(-)
> >
> > diff --git a/arch/arm/include/asm/arch-omap3/mem.h
> b/arch/arm/include/asm/arch-omap3/mem.h
> > index 569779c55e..fce3568eca 100644
> > --- a/arch/arm/include/asm/arch-omap3/mem.h
> > +++ b/arch/arm/include/asm/arch-omap3/mem.h
> > @@ -475,7 +475,7 @@ enum {
> >   #ifndef __ASSEMBLY__
> >
> >   /* Function prototypes */
> > -void mem_init(void);
> > +void omap3_mem_init(void);
> >
> >   u32 is_mem_sdr(void);
> >   u32 mem_ok(u32 cs);
> > diff --git a/arch/arm/mach-omap2/omap3/board.c
> b/arch/arm/mach-omap2/omap3/board.c
> > index 8b70251457..c76a95dd5d 100644
> > --- a/arch/arm/mach-omap2/omap3/board.c
> > +++ b/arch/arm/mach-omap2/omap3/board.c
> > @@ -216,7 +216,7 @@ void s_init(void)
> >   void board_init_f(ulong dummy)
> >   {
> >       early_system_init();
> > -     mem_init();
> > +     omap3_mem_init();
> >       /*
> >       * Save the boot parameters passed from romcode.
> >       * We cannot delay the saving further than this,
> > diff --git a/arch/arm/mach-omap2/omap3/emif4.c
> b/arch/arm/mach-omap2/omap3/emif4.c
> > index 7e5a281922..4fbfb387ab 100644
> > --- a/arch/arm/mach-omap2/omap3/emif4.c
> > +++ b/arch/arm/mach-omap2/omap3/emif4.c
> > @@ -159,10 +159,10 @@ int dram_init_banksize(void)
> >   }
> >
> >   /*
> > - * mem_init() -
> > + * omap3_mem_init() -
> >    *  - Initialize memory subsystem
> >    */
> > -void mem_init(void)
> > +void omap3_mem_init(void)
> >   {
> >       do_emif4_init();
> >   }
> > diff --git a/arch/arm/mach-omap2/omap3/sdrc.c
> b/arch/arm/mach-omap2/omap3/sdrc.c
> > index 5d43e7c9cf..f2a0769b9d 100644
> > --- a/arch/arm/mach-omap2/omap3/sdrc.c
> > +++ b/arch/arm/mach-omap2/omap3/sdrc.c
> > @@ -4,7 +4,7 @@
> >    *
> >    * This file has been created after exctracting and consolidating
> >    * the SDRC related content from mem.c and board.c, also created
> > - * generic init function (mem_init).
> > + * generic init function (omap3_mem_init).
> >    *
> >    * Copyright (C) 2004-2010
> >    * Texas Instruments Incorporated - https://www.ti.com/
> > @@ -232,11 +232,11 @@ int dram_init_banksize(void)
> >   }
> >
> >   /*
> > - * mem_init -
> > + * map3_mem_init -
>
> nit: omap3
>
>
thanks, will add to v3.



> >    *  - Init the sdrc chip,
> >    *  - Selects CS0 and CS1,
> >    */
> > -void mem_init(void)
> > +void omap3_mem_init(void)
> >   {
> >       /* only init up first bank here */
> >       do_sdrc_init(CS0, EARLY_INIT);
>
>