[RFC PATCH 12/16] arm: dts: k3-am65x-binman: Add ICSSG2 overlay and configuration
MD Danish Anwar
danishanwar at ti.com
Wed Dec 27 11:19:36 CET 2023
On 20/12/23 4:10 pm, Roger Quadros wrote:
>
>
> On 19/12/2023 12:34, MD Danish Anwar wrote:
>> Add ICSSG2 overlay and configuration to tispl and u-boot images.
>>
>> Signed-off-by: MD Danish Anwar <danishanwar at ti.com>
>> ---
>> arch/arm/dts/k3-am65x-binman.dtsi | 85 +++++++++++++++++++++++++++++++
>> 1 file changed, 85 insertions(+)
>>
>> diff --git a/arch/arm/dts/k3-am65x-binman.dtsi b/arch/arm/dts/k3-am65x-binman.dtsi
>> index 8cc24da1f3..9a0c0fca47 100644
>> --- a/arch/arm/dts/k3-am65x-binman.dtsi
>> +++ b/arch/arm/dts/k3-am65x-binman.dtsi
>> @@ -98,6 +98,8 @@
>> #define SPL_AM654_EVM_DTB "spl/dts/k3-am654-base-board.dtb"
>> #define AM654_EVM_DTB "u-boot.dtb"
>>
>> +#define AM654_EVM_ICSSG2_DTBO "arch/arm/dts/k3-am654-icssg2.dtbo"
>> +
>> &binman {
>> ti-spl {
>> insert-template = <&ti_spl_template>;
>> @@ -124,6 +126,20 @@
>> filename = SPL_AM654_EVM_DTB;
>> };
>> };
>> +
>> + fdt-1 {
>> + description = "k3-am654-icssg2 overlay";
>> + type = "flat_dt";
>> + arch = "arm";
>> + compression = "none";
>> + ti-secure {
>> + content = <&spl_am65x_evm_icssg2_dtb>;
>> + keyfile = "custMpk.pem";
>> + };
>> + spl_am65x_evm_icssg2_dtb: blob-ext {
>> + filename = AM654_EVM_ICSSG2_DTBO;
>> + };
>
> This is wrong.
>
> ICSSG2 Ethernet should be part of the fdt-0 configuration as the 2 Ethernet ports
> on the board are hardwired to ICSSG2. Not having them working by default
> is an invalid configuration.
>
ICSSG2 ethernet ports should be enabled by default. But the ICSSG2 nodes
is added in the overlay file (k3-am654-icssg2.dtso) in kernel so they
are added in same overlay file in u-boot as well.
I am keeping,
fdt-0 as k3-am654-base-board dtb,
fdt-1 as k3-am654-icssg2 dtbo,
conf-0 as k3-am654-base-board and
conf-1 as k3-am654-icssg2.
Do you want me to keep k3-am654-icssg2 dtbo as fdt-0 and
k3-am654-base-board as fdt-1? I tried doing this but this results into
u-boot getting stuck. The tispl and u-boot images are not able to load
if I swap fdt-0 and fdt-1 , and conf-0 and conf-1.
If the current combination doesn't look OK, please let me know what
should be the correct combinations for fdt-0, fdt-1, conf-0 and conf-1.
>> + };
>> };
>>
>> configurations {
>> @@ -135,6 +151,13 @@
>> loadables = "tee", "dm", "spl";
>> fdt = "fdt-0";
>> };
>> +
>> + conf-1 {
>> + description = "k3-am654-icssg2";
>> + firmware = "atf";
>> + loadables = "tee", "dm", "spl";
>> + fdt = "fdt-0", "fdt-1";
>> + };
>> };
>> };
>> };s
>> @@ -168,6 +191,24 @@
>> };
>> };
>>
>> + fdt-1 {
>> + description = "k3-am654-icssg2 overlay";
>> + type = "flat_dt";
>> + arch = "arm";
>> + compression = "none";
>> + ti-secure {
>> + content = <&am65x_evm_icssg2_dtb>;
>> + keyfile = "custMpk.pem";
>> +
>> + };
>> + am65x_evm_icssg2_dtb: blob-ext {
>> + filename = AM654_EVM_ICSSG2_DTBO;
>> + };
>> + hash {
>> + algo = "crc32";
>> + };
>> + };
>> +
>> };
>>
>> configurations {
>> @@ -179,6 +220,13 @@
>> loadables = "uboot";
>> fdt = "fdt-0";
>> };
>> +
>> + conf-1 {
>> + description = "k3-am654-icssg2";
>> + firmware = "uboot";
>> + loadables = "uboot";
>> + fdt = "fdt-0", "fdt-1";
>> + };
>> };
>> };
>> };
>> @@ -205,6 +253,16 @@
>> filename = SPL_AM654_EVM_DTB;
>> };
>> };
>> +
>> + fdt-1 {
>> + description = "k3-am654-icssg2 overlay";
>> + type = "flat_dt";
>> + arch = "arm";
>> + compression = "none";
>> + blob {
>> + filename = AM654_EVM_ICSSG2_DTBO;
>> + };
>> + };
>> };
>>
>> configurations {
>> @@ -216,6 +274,13 @@
>> loadables = "tee", "dm", "spl";
>> fdt = "fdt-0";
>> };
>> +
>> + conf-1 {
>> + description = "k3-am654-icssg2";
>> + firmware = "atf";
>> + loadables = "tee", "dm", "spl";
>> + fdt = "fdt-0", "fdt-1";
>> + };
>> };
>> };
>> };
>> @@ -243,6 +308,19 @@
>> algo = "crc32";
>> };
>> };
>> +
>> + fdt-1 {
>> + description = "k3-am654-icssg2";
>> + type = "flat_dt";
>> + arch = "arm";
>> + compression = "none";
>> + blob {
>> + filename = AM654_EVM_ICSSG2_DTBO;
>> + };
>> + hash {
>> + algo = "crc32";
>> + };
>> + };
>> };
>>
>> configurations {
>> @@ -254,6 +332,13 @@
>> loadables = "uboot";
>> fdt = "fdt-0";
>> };
>> +
>> + conf-1 {
>> + description = "k3-am654-icssg2";
>> + firmware = "uboot";
>> + loadables = "uboot";
>> + fdt = "fdt-0", "fdt-1";
>> + };
>> };
>> };
>> };
>
--
Thanks and Regards,
Danish
More information about the U-Boot
mailing list