[PATCH v3 7/8] dts: meson-gxbb: Switch to using upstream DT

[Tom Rini]

On Thu, Dec 28, 2023 at 03:09:41PM +0000, Simon Glass wrote:
> Hi Tom,
> 
> On Thu, Dec 28, 2023 at 1:56 PM Tom Rini <trini at konsulko.com> wrote:
> >
> > On Thu, Dec 28, 2023 at 01:37:11PM +0000, Simon Glass wrote:
> > > Hi Sumit,
> > >
> > > On Thu, Dec 28, 2023 at 11:59 AM Sumit Garg <sumit.garg at linaro.org> wrote:
> > > >
> > > > Although there were still some variations in board DTS files based on
> > > > meson-gxbb SoC but I think those were minor differences from upstream
> > > > and shouldn't impact boot on these devices.
> > > >
> > > > So switch to upstream DT via mirroring amlogic/ directory from
> > > > devicetree-rebasing/src/arm64/amlogic/ directory. And thereby directly
> > > > building DTB from there including *-u-boot.dtsi files from
> > > > arch/$(ARCH)/dts/ directory.
> > > >
> > > > Reviewed-by: Neil Armstrong <neil.armstrong at linaro.org>
> > > > Signed-off-by: Sumit Garg <sumit.garg at linaro.org>
> > > > ---
> > > >
> > > > Changes in v3:
> > > > --------------
> > > > - Dropped Makefile portion and enabled OF_UPSTREAM for SoC instead.
> > > >
> > > > Changes in v2:
> > > > --------------
> > > > - Picked up review tag
> > > >
> > > >  arch/arm/mach-meson/Kconfig           | 1 +
> > > >  configs/nanopi-k2_defconfig           | 2 +-
> > > >  configs/odroid-c2_defconfig           | 2 +-
> > > >  configs/p200_defconfig                | 2 +-
> > > >  configs/p201_defconfig                | 2 +-
> > > >  configs/videostrong-kii-pro_defconfig | 2 +-
> > > >  configs/wetek-hub_defconfig           | 2 +-
> > > >  configs/wetek-play2_defconfig         | 2 +-
> > > >  dts/arch/arm64/amlogic                | 1 +
> > > >  9 files changed, 9 insertions(+), 7 deletions(-)
> > > >  create mode 120000 dts/arch/arm64/amlogic
> > > >
> > >
> > > Reviewed-by: Simon Glass <sjg at chromium.org>
> > >
> > > > diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig
> > > > index d6c89058061..8ddb59161a0 100644
> > > > --- a/arch/arm/mach-meson/Kconfig
> > > > +++ b/arch/arm/mach-meson/Kconfig
> > > > @@ -25,6 +25,7 @@ choice
> > > >  config MESON_GXBB
> > > >         bool "GXBB"
> > > >         select MESON_GX
> > > > +       imply OF_UPSTREAM
> > > >         help
> > > >           Select this if your SoC is an S905
> > > >
> > > > diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig
> > > > index 41dbf7981f8..2e1c756bf7a 100644
> > > > --- a/configs/nanopi-k2_defconfig
> > > > +++ b/configs/nanopi-k2_defconfig
> > > > @@ -6,7 +6,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> > > >  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x20000000
> > > >  CONFIG_ENV_SIZE=0x2000
> > > >  CONFIG_DM_GPIO=y
> > > > -CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-nanopi-k2"
> > > > +CONFIG_DEFAULT_DEVICE_TREE="amlogic/meson-gxbb-nanopi-k2"
> > > >  CONFIG_OF_LIBFDT_OVERLAY=y
> > > >  CONFIG_DM_RESET=y
> > > >  CONFIG_DEBUG_UART_BASE=0xc81004c0
> > >
> > > So now I am wondering if we can (later) have the SoC be implied when
> > > using OF_UPSTREAM so we can do:
> > >
> > > CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-nanopi-k2"
> > >
> > > and it will add the 'amlogic/' automatically?
> > >
> > > Perhaps that might be a way to bridge the gap in terms of file layout?
> >
> > That's going to start to look real ugly real quick I suspect and I'm not
> > sure what it really gets us? It seems to me that the convention of
> > "vendor/board" has already been well enough adapted outside of the
> > kernel, with the odd sticking point being getting everyone used to
> > whatever will be happening for 32bit boards long term. So I think hiding
> > the vendor part of the string here will be more, not less, confusing
> > long term.
> 
> Now that I dig in a bit, I see that the devicetree-rebasing tree does
> not have any Makefiles in it. How does Linux build with it? Does
> anyone have instructions?

Linux doesn't build with it, it's the relevant parts of the kernel tree
extracted for other projects to more easily use (more or less).

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20231228/898b12f6/attachment.sig>