[PATCH 03/13] mmc: renesas-sdhi: Adjust HS400 calibration tables
Jaehoon Chung
jh80.chung at samsung.com
Wed Feb 1 00:27:56 CET 2023
On 1/27/23 05:05, Marek Vasut wrote:
> From: Hai Pham <hai.pham.ud at renesas.com>
>
> Adjust HS400 calibration tables based on Linux settings
>
> Reviewed-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
> Signed-off-by: Hai Pham <hai.pham.ud at renesas.com>
> Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung at samsung.com>
Best Regards,
Jaehoon Chung
> ---
> drivers/mmc/renesas-sdhi.c | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
> index 3ec0444700e..f9155bc44de 100644
> --- a/drivers/mmc/renesas-sdhi.c
> +++ b/drivers/mmc/renesas-sdhi.c
> @@ -79,24 +79,24 @@ static const u8 r8a7795_calib_table[2][CALIB_TABLE_MAX] = {
> };
>
> static const u8 r8a7796_rev13_calib_table[2][CALIB_TABLE_MAX] = {
> - { 0, 0, 0, 0, 2, 3, 4, 4, 5, 6, 7, 7, 8, 9, 9, 10,
> - 11, 12, 13, 15, 16, 17, 17, 18, 19, 19, 20, 21, 21, 22, 23, 23 },
> - { 1, 2, 2, 3, 4, 4, 5, 6, 6, 7, 8, 9, 9, 10, 11, 12,
> - 13, 14, 15, 16, 17, 17, 18, 19, 20, 20, 21, 22, 22, 23, 24, 24 }
> + { 3, 3, 3, 3, 3, 3, 3, 4, 4, 5, 6, 7, 8, 9, 10, 15,
> + 16, 16, 16, 16, 16, 16, 17, 18, 18, 19, 20, 21, 22, 23, 24, 25 },
> + { 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 6, 7, 8, 11,
> + 12, 17, 18, 18, 18, 18, 18, 18, 18, 19, 20, 21, 22, 23, 25, 25 }
> };
>
> static const u8 r8a77965_calib_table[2][CALIB_TABLE_MAX] = {
> - { 0, 1, 2, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 15,
> - 16, 17, 18, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 29 },
> - { 0, 1, 2, 2, 2, 3, 4, 5, 6, 7, 9, 10, 11, 12, 13, 15,
> - 16, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 31 }
> + { 1, 2, 6, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 15, 15, 16,
> + 17, 18, 19, 20, 21, 22, 23, 24, 25, 25, 26, 27, 28, 29, 30, 31 },
> + { 2, 3, 4, 4, 5, 6, 7, 9, 10, 11, 12, 13, 14, 15, 16, 17,
> + 17, 17, 20, 21, 22, 23, 24, 25, 27, 28, 29, 30, 31, 31, 31, 31 }
> };
>
> static const u8 r8a77990_calib_table[2][CALIB_TABLE_MAX] = {
> { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
> 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },
> - { 0, 0, 1, 2, 3, 4, 4, 4, 4, 5, 5, 6, 7, 8, 10, 11,
> - 12, 13, 14, 16, 17, 18, 18, 18, 19, 19, 20, 24, 26, 26, 26, 26 }
> + { 0, 0, 0, 1, 2, 3, 3, 4, 4, 4, 5, 5, 6, 8, 9, 10,
> + 11, 12, 13, 15, 16, 17, 17, 18, 18, 19, 20, 22, 24, 25, 26, 26 }
> };
>
> static int rmobile_is_gen3_mmc0(struct tmio_sd_priv *priv)
More information about the U-Boot
mailing list