[PATCH 2/2] configs: imx: imx8mm_beacon: Add config option for QSPI booting
Stefano Babic
sbabic at denx.de
Wed Feb 1 14:48:50 CET 2023
On 01.02.23 14:44, Adam Ford wrote:
> On Wed, Feb 1, 2023 at 7:06 AM Stefano Babic <sbabic at denx.de> wrote:
>>
>> Hi Adam,
>>
>> I haven't picked up these two patches in my PR due to a small thing (at
>> least, what I could see). There are a couple of new CONFIG_ in header
>> (CONFIG_SYS_UBOOT_BASE, CFG_ as now is okay), but new CONFIG_ should be
>> managed only by Kbuild and are not allowed.
>
> The initial submission was back in November,
Yes, that the reason, patch was just in my queue...
> and I know the Kconfig
> has undergone some updates and migrations since then, so I'll rebase
> and send a V2 later tonight.
Thanks again - I will then submit in a further PR for 2022.04, there are
a few pacthes missing.
Stefano
>
> thanks
>
> adam
>>
>> My pipeline failed, see here:
>>
>> https://source.denx.de/u-boot/custodians/u-boot-imx/-/jobs/566141
>>
>> On 19.11.22 20:28, Adam Ford wrote:
>>> The imx8mm_beacon SOM has a QSPI part attached to the FSPI controller.
>>> Update the header and spl files to support booting from NOR flash and
>>> add imx8mm_beacon_fspi_defconfig to support this configuration.
>>>
>>> Signed-off-by: Adam Ford <aford173 at gmail.com>
>>>
>>> diff --git a/board/beacon/imx8mm/spl.c b/board/beacon/imx8mm/spl.c
>>> index a5f337aa17..4beda0c62d 100644
>>> --- a/board/beacon/imx8mm/spl.c
>>> +++ b/board/beacon/imx8mm/spl.c
>>> @@ -36,6 +36,8 @@ int spl_board_boot_device(enum boot_device boot_dev_spl)
>>> return BOOT_DEVICE_MMC2;
>>> case USB_BOOT:
>>> return BOOT_DEVICE_BOARD;
>>> + case QSPI_BOOT:
>>> + return BOOT_DEVICE_NOR;
>>> default:
>>> return BOOT_DEVICE_NONE;
>>> }
>>> diff --git a/configs/imx8mm_beacon_fspi_defconfig b/configs/imx8mm_beacon_fspi_defconfig
>>> new file mode 100644
>>> index 0000000000..805fd3f671
>>> --- /dev/null
>>> +++ b/configs/imx8mm_beacon_fspi_defconfig
>>> @@ -0,0 +1,155 @@
>>> +CONFIG_ARM=y
>>> +CONFIG_ARCH_IMX8M=y
>>> +CONFIG_TEXT_BASE=0x40200000
>>> +CONFIG_SYS_MALLOC_LEN=0x2000000
>>> +CONFIG_SPL_GPIO=y
>>> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
>>> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
>>> +CONFIG_ENV_SIZE=0x2000
>>> +CONFIG_ENV_OFFSET=0xFFFFDE00
>>> +CONFIG_IMX_CONFIG="board/freescale/imx8mm_evk/imximage-8mm-lpddr4-fspi.cfg"
>>> +CONFIG_DM_GPIO=y
>>> +CONFIG_DEFAULT_DEVICE_TREE="imx8mm-beacon-kit"
>>> +CONFIG_SPL_TEXT_BASE=0x7E2000
>>> +CONFIG_TARGET_IMX8MM_BEACON=y
>>> +CONFIG_SYS_PROMPT="u-boot=> "
>>> +CONFIG_SPL_SERIAL=y
>>> +CONFIG_SPL_DRIVERS_MISC=y
>>> +CONFIG_SPL=y
>>> +CONFIG_SYS_LOAD_ADDR=0x40480000
>>> +CONFIG_LTO=y
>>> +CONFIG_SYS_MONITOR_LEN=524288
>>> +CONFIG_FIT=y
>>> +CONFIG_FIT_EXTERNAL_OFFSET=0x3000
>>> +CONFIG_SPL_LOAD_FIT=y
>>> +# CONFIG_USE_SPL_FIT_GENERATOR is not set
>>> +CONFIG_OF_SYSTEM_SETUP=y
>>> +CONFIG_USE_BOOTCOMMAND=y
>>> +CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; fi;"
>>> +CONFIG_DEFAULT_FDT_FILE="imx8mm-beacon-kit.dtb"
>>> +CONFIG_SPL_MAX_SIZE=0x25000
>>> +CONFIG_SPL_PAD_TO=0x0
>>> +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
>>> +CONFIG_SPL_BSS_START_ADDR=0x910000
>>> +CONFIG_SPL_BSS_MAX_SIZE=0x2000
>>> +CONFIG_SPL_BOARD_INIT=y
>>> +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
>>> +CONFIG_SPL_STACK=0x920000
>>> +CONFIG_SYS_SPL_MALLOC=y
>>> +CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
>>> +CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x42200000
>>> +CONFIG_SYS_SPL_MALLOC_SIZE=0x80000
>>> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
>>> +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
>>> +CONFIG_SPL_CRC32=y
>>> +CONFIG_SPL_I2C=y
>>> +CONFIG_SPL_NOR_SUPPORT=y
>>> +CONFIG_SPL_POWER=y
>>> +CONFIG_SPL_USB_HOST=y
>>> +CONFIG_SPL_USB_GADGET=y
>>> +CONFIG_SPL_USB_SDP_SUPPORT=y
>>> +CONFIG_SPL_WATCHDOG=y
>>> +CONFIG_HUSH_PARSER=y
>>> +CONFIG_SYS_MAXARGS=64
>>> +CONFIG_SYS_CBSIZE=2048
>>> +CONFIG_SYS_PBSIZE=2074
>>> +CONFIG_SYS_BOOTM_LEN=0x800000
>>> +# CONFIG_CMD_EXPORTENV is not set
>>> +# CONFIG_CMD_IMPORTENV is not set
>>> +# CONFIG_CMD_CRC32 is not set
>>> +CONFIG_CMD_CLK=y
>>> +CONFIG_CMD_FUSE=y
>>> +CONFIG_CMD_GPIO=y
>>> +CONFIG_CMD_I2C=y
>>> +CONFIG_CMD_MMC=y
>>> +CONFIG_CMD_PART=y
>>> +CONFIG_CMD_SPI=y
>>> +CONFIG_CMD_USB=y
>>> +CONFIG_CMD_USB_SDP=y
>>> +CONFIG_CMD_USB_MASS_STORAGE=y
>>> +CONFIG_CMD_DHCP=y
>>> +CONFIG_CMD_MII=y
>>> +CONFIG_CMD_PING=y
>>> +CONFIG_CMD_CACHE=y
>>> +CONFIG_CMD_PMIC=y
>>> +CONFIG_CMD_REGULATOR=y
>>> +CONFIG_CMD_EXT2=y
>>> +CONFIG_CMD_EXT4=y
>>> +CONFIG_CMD_EXT4_WRITE=y
>>> +CONFIG_CMD_FAT=y
>>> +CONFIG_OF_CONTROL=y
>>> +CONFIG_SPL_OF_CONTROL=y
>>> +CONFIG_ENV_OVERWRITE=y
>>> +CONFIG_ENV_IS_IN_MMC=y
>>> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
>>> +CONFIG_SYS_MMC_ENV_DEV=2
>>> +CONFIG_SYS_MMC_ENV_PART=2
>>> +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
>>> +CONFIG_USE_ETHPRIME=y
>>> +CONFIG_ETHPRIME="FEC"
>>> +CONFIG_NET_RANDOM_ETHADDR=y
>>> +CONFIG_SPL_DM=y
>>> +CONFIG_SPL_CLK_COMPOSITE_CCF=y
>>> +CONFIG_CLK_COMPOSITE_CCF=y
>>> +CONFIG_SPL_CLK_IMX8MM=y
>>> +CONFIG_CLK_IMX8MM=y
>>> +CONFIG_MXC_GPIO=y
>>> +CONFIG_DM_PCA953X=y
>>> +CONFIG_DM_I2C=y
>>> +CONFIG_SUPPORT_EMMC_BOOT=y
>>> +CONFIG_MMC_IO_VOLTAGE=y
>>> +CONFIG_MMC_UHS_SUPPORT=y
>>> +CONFIG_MMC_HS400_ES_SUPPORT=y
>>> +CONFIG_MMC_HS400_SUPPORT=y
>>> +CONFIG_FSL_USDHC=y
>>> +CONFIG_MTD=y
>>> +CONFIG_DM_MTD=y
>>> +CONFIG_DM_SPI_FLASH=y
>>> +CONFIG_SF_DEFAULT_MODE=0
>>> +CONFIG_SF_DEFAULT_SPEED=40000000
>>> +CONFIG_SPI_FLASH_BAR=y
>>> +CONFIG_SPI_FLASH_STMICRO=y
>>> +CONFIG_SPI_FLASH_MTD=y
>>> +CONFIG_PHYLIB=y
>>> +CONFIG_PHY_ATHEROS=y
>>> +CONFIG_PHY_GIGE=y
>>> +CONFIG_FEC_MXC=y
>>> +CONFIG_MII=y
>>> +CONFIG_SPL_PHY=y
>>> +CONFIG_SPL_NOP_PHY=y
>>> +CONFIG_PINCTRL=y
>>> +CONFIG_SPL_PINCTRL=y
>>> +CONFIG_PINCTRL_IMX8M=y
>>> +CONFIG_POWER_DOMAIN=y
>>> +CONFIG_IMX8M_POWER_DOMAIN=y
>>> +CONFIG_DM_PMIC=y
>>> +# CONFIG_SPL_PMIC_CHILDREN is not set
>>> +CONFIG_DM_PMIC_BD71837=y
>>> +CONFIG_SPL_DM_PMIC_BD71837=y
>>> +CONFIG_DM_REGULATOR=y
>>> +CONFIG_DM_REGULATOR_BD71837=y
>>> +CONFIG_DM_REGULATOR_FIXED=y
>>> +CONFIG_DM_REGULATOR_GPIO=y
>>> +CONFIG_DM_SERIAL=y
>>> +CONFIG_MXC_UART=y
>>> +CONFIG_SPI=y
>>> +CONFIG_DM_SPI=y
>>> +CONFIG_NXP_FSPI=y
>>> +CONFIG_SYSRESET=y
>>> +CONFIG_SPL_SYSRESET=y
>>> +CONFIG_SYSRESET_PSCI=y
>>> +CONFIG_SYSRESET_WATCHDOG=y
>>> +CONFIG_DM_THERMAL=y
>>> +CONFIG_USB=y
>>> +CONFIG_USB_EHCI_HCD=y
>>> +CONFIG_MXC_USB_OTG_HACTIVE=y
>>> +CONFIG_USB_STORAGE=y
>>> +CONFIG_USB_GADGET=y
>>> +CONFIG_USB_GADGET_VENDOR_NUM=0x0525
>>> +CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
>>> +CONFIG_CI_UDC=y
>>> +CONFIG_SDP_LOADADDR=0x40400000
>>> +CONFIG_USB_GADGET_DOWNLOAD=y
>>> +CONFIG_IMX_WATCHDOG=y
>>> +CONFIG_FSPI_CONF_HEADER=y
>>> +CONFIG_FSPI_CONF_FILE="fspi_header.bin"
>>> diff --git a/include/configs/imx8mm_beacon.h b/include/configs/imx8mm_beacon.h
>>> index 8e08899458..cab4a02c18 100644
>>> --- a/include/configs/imx8mm_beacon.h
>>> +++ b/include/configs/imx8mm_beacon.h
>>> @@ -9,8 +9,17 @@
>>> #include <linux/sizes.h>
>>> #include <asm/arch/imx-regs.h>
>>>
>>> +#define UBOOT_ITB_OFFSET 0x57C00
>>> +#define FSPI_CONF_BLOCK_SIZE 0x1000
>>> +#define UBOOT_ITB_OFFSET_FSPI \
>>> + (UBOOT_ITB_OFFSET + FSPI_CONF_BLOCK_SIZE)
>>> +#ifdef CONFIG_FSPI_CONF_HEADER
>>> +#define CONFIG_SYS_UBOOT_BASE \
>>
>> See here, it was renamed as CFG_SYS_UBOOT_BASE
>>
>>> + (QSPI0_AMBA_BASE + UBOOT_ITB_OFFSET_FSPI)
>>> +#else
>>> #define CONFIG_SYS_UBOOT_BASE \
>>> (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
>>> +#endif
>>>
>>> #ifdef CONFIG_SPL_BUILD
>>> /* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
>>
>> Best regards,
>> Stefano
>>
>> --
>> =====================================================================
>> DENX Software Engineering GmbH, Managing Director: Erika Unter
>> HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
>> Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
>> =====================================================================
>>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, 82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list