[PATCH v3 38/76] mtd: Drop unused fsmc_nand driver

Simon Glass sjg at chromium.org
Wed Feb 1 21:19:49 CET 2023


This is not used since this commit:

   570c3dcfc15 arm: Remove spear600 boards and the rest of SPEAr support

Drop the driver and Kconfig option.

Signed-off-by: Simon Glass <sjg at chromium.org>
Reviewed-by: Michael Trimarchi <michael at amarulasolutions.com>
---

(no changes since v1)

 drivers/mtd/nand/raw/Makefile    |   1 -
 drivers/mtd/nand/raw/fsmc_nand.c | 470 -------------------------------
 include/linux/mtd/fsmc_nand.h    |  84 ------
 3 files changed, 555 deletions(-)
 delete mode 100644 drivers/mtd/nand/raw/fsmc_nand.c
 delete mode 100644 include/linux/mtd/fsmc_nand.h

diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index e8764cf358b..f004eb39f3b 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_NAND_DENALI) += denali.o
 obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
 obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
 obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
-obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
 obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
 obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
 obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
deleted file mode 100644
index d795864949c..00000000000
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ /dev/null
@@ -1,470 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (C) Copyright 2010
- * Vipin Kumar, STMicroelectronics, vipin.kumar at st.com.
- *
- * (C) Copyright 2012
- * Amit Virdi, STMicroelectronics, amit.virdi at st.com.
- */
-
-#include <common.h>
-#include <nand.h>
-#include <asm/io.h>
-#include <linux/bitops.h>
-#include <linux/err.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/rawnand.h>
-#include <linux/mtd/fsmc_nand.h>
-#include <asm/arch/hardware.h>
-
-static u32 fsmc_version;
-static struct fsmc_regs *const fsmc_regs_p = (struct fsmc_regs *)
-	CONFIG_SYS_FSMC_BASE;
-
-/*
- * ECC4 and ECC1 have 13 bytes and 3 bytes of ecc respectively for 512 bytes of
- * data. ECC4 can correct up to 8 bits in 512 bytes of data while ECC1 can
- * correct 1 bit in 512 bytes
- */
-
-static struct nand_ecclayout fsmc_ecc4_lp_layout = {
-	.eccbytes = 104,
-	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
-		9,  10,  11,  12,  13,  14,
-		18,  19,  20,  21,  22,  23,  24,
-		25,  26,  27,  28,  29,  30,
-		34,  35,  36,  37,  38,  39,  40,
-		41,  42,  43,  44,  45,  46,
-		50,  51,  52,  53,  54,  55,  56,
-		57,  58,  59,  60,  61,  62,
-		66,  67,  68,  69,  70,  71,  72,
-		73,  74,  75,  76,  77,  78,
-		82,  83,  84,  85,  86,  87,  88,
-		89,  90,  91,  92,  93,  94,
-		98,  99, 100, 101, 102, 103, 104,
-		105, 106, 107, 108, 109, 110,
-		114, 115, 116, 117, 118, 119, 120,
-		121, 122, 123, 124, 125, 126
-	},
-	.oobfree = {
-		{.offset = 15, .length = 3},
-		{.offset = 31, .length = 3},
-		{.offset = 47, .length = 3},
-		{.offset = 63, .length = 3},
-		{.offset = 79, .length = 3},
-		{.offset = 95, .length = 3},
-		{.offset = 111, .length = 3},
-		{.offset = 127, .length = 1}
-	}
-};
-
-/*
- * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
- * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
- * bytes are free for use.
- */
-static struct nand_ecclayout fsmc_ecc4_224_layout = {
-	.eccbytes = 104,
-	.eccpos = {  2,   3,   4,   5,   6,   7,   8,
-		9,  10,  11,  12,  13,  14,
-		18,  19,  20,  21,  22,  23,  24,
-		25,  26,  27,  28,  29,  30,
-		34,  35,  36,  37,  38,  39,  40,
-		41,  42,  43,  44,  45,  46,
-		50,  51,  52,  53,  54,  55,  56,
-		57,  58,  59,  60,  61,  62,
-		66,  67,  68,  69,  70,  71,  72,
-		73,  74,  75,  76,  77,  78,
-		82,  83,  84,  85,  86,  87,  88,
-		89,  90,  91,  92,  93,  94,
-		98,  99, 100, 101, 102, 103, 104,
-		105, 106, 107, 108, 109, 110,
-		114, 115, 116, 117, 118, 119, 120,
-		121, 122, 123, 124, 125, 126
-	},
-	.oobfree = {
-		{.offset = 15, .length = 3},
-		{.offset = 31, .length = 3},
-		{.offset = 47, .length = 3},
-		{.offset = 63, .length = 3},
-		{.offset = 79, .length = 3},
-		{.offset = 95, .length = 3},
-		{.offset = 111, .length = 3},
-		{.offset = 127, .length = 97}
-	}
-};
-
-/*
- * ECC placement definitions in oobfree type format
- * There are 13 bytes of ecc for every 512 byte block and it has to be read
- * consecutively and immediately after the 512 byte data block for hardware to
- * generate the error bit offsets in 512 byte data
- * Managing the ecc bytes in the following way makes it easier for software to
- * read ecc bytes consecutive to data bytes. This way is similar to
- * oobfree structure maintained already in u-boot nand driver
- */
-static struct fsmc_eccplace fsmc_eccpl_lp = {
-	.eccplace = {
-		{.offset = 2, .length = 13},
-		{.offset = 18, .length = 13},
-		{.offset = 34, .length = 13},
-		{.offset = 50, .length = 13},
-		{.offset = 66, .length = 13},
-		{.offset = 82, .length = 13},
-		{.offset = 98, .length = 13},
-		{.offset = 114, .length = 13}
-	}
-};
-
-static struct nand_ecclayout fsmc_ecc4_sp_layout = {
-	.eccbytes = 13,
-	.eccpos = { 0,  1,  2,  3,  6,  7, 8,
-		9, 10, 11, 12, 13, 14
-	},
-	.oobfree = {
-		{.offset = 15, .length = 1},
-	}
-};
-
-static struct fsmc_eccplace fsmc_eccpl_sp = {
-	.eccplace = {
-		{.offset = 0, .length = 4},
-		{.offset = 6, .length = 9}
-	}
-};
-
-static struct nand_ecclayout fsmc_ecc1_layout = {
-	.eccbytes = 24,
-	.eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
-		66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
-	.oobfree = {
-		{.offset = 8, .length = 8},
-		{.offset = 24, .length = 8},
-		{.offset = 40, .length = 8},
-		{.offset = 56, .length = 8},
-		{.offset = 72, .length = 8},
-		{.offset = 88, .length = 8},
-		{.offset = 104, .length = 8},
-		{.offset = 120, .length = 8}
-	}
-};
-
-/* Count the number of 0's in buff upto a max of max_bits */
-static int count_written_bits(uint8_t *buff, int size, int max_bits)
-{
-	int k, written_bits = 0;
-
-	for (k = 0; k < size; k++) {
-		written_bits += hweight8(~buff[k]);
-		if (written_bits > max_bits)
-			break;
-	}
-
-	return written_bits;
-}
-
-static void fsmc_nand_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
-{
-	struct nand_chip *this = mtd_to_nand(mtd);
-	ulong IO_ADDR_W;
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		IO_ADDR_W = (ulong)this->IO_ADDR_W;
-
-		IO_ADDR_W &= ~(CONFIG_SYS_NAND_CLE | CONFIG_SYS_NAND_ALE);
-		if (ctrl & NAND_CLE)
-			IO_ADDR_W |= CONFIG_SYS_NAND_CLE;
-		if (ctrl & NAND_ALE)
-			IO_ADDR_W |= CONFIG_SYS_NAND_ALE;
-
-		if (ctrl & NAND_NCE) {
-			writel(readl(&fsmc_regs_p->pc) |
-					FSMC_ENABLE, &fsmc_regs_p->pc);
-		} else {
-			writel(readl(&fsmc_regs_p->pc) &
-					~FSMC_ENABLE, &fsmc_regs_p->pc);
-		}
-		this->IO_ADDR_W = (void *)IO_ADDR_W;
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, this->IO_ADDR_W);
-}
-
-static int fsmc_bch8_correct_data(struct mtd_info *mtd, u_char *dat,
-		u_char *read_ecc, u_char *calc_ecc)
-{
-	/* The calculated ecc is actually the correction index in data */
-	u32 err_idx[8];
-	u32 num_err, i;
-	u32 ecc1, ecc2, ecc3, ecc4;
-
-	num_err = (readl(&fsmc_regs_p->sts) >> 10) & 0xF;
-
-	if (likely(num_err == 0))
-		return 0;
-
-	if (unlikely(num_err > 8)) {
-		/*
-		 * This is a temporary erase check. A newly erased page read
-		 * would result in an ecc error because the oob data is also
-		 * erased to FF and the calculated ecc for an FF data is not
-		 * FF..FF.
-		 * This is a workaround to skip performing correction in case
-		 * data is FF..FF
-		 *
-		 * Logic:
-		 * For every page, each bit written as 0 is counted until these
-		 * number of bits are greater than 8 (the maximum correction
-		 * capability of FSMC for each 512 + 13 bytes)
-		 */
-
-		int bits_ecc = count_written_bits(read_ecc, 13, 8);
-		int bits_data = count_written_bits(dat, 512, 8);
-
-		if ((bits_ecc + bits_data) <= 8) {
-			if (bits_data)
-				memset(dat, 0xff, 512);
-			return bits_data + bits_ecc;
-		}
-
-		return -EBADMSG;
-	}
-
-	ecc1 = readl(&fsmc_regs_p->ecc1);
-	ecc2 = readl(&fsmc_regs_p->ecc2);
-	ecc3 = readl(&fsmc_regs_p->ecc3);
-	ecc4 = readl(&fsmc_regs_p->sts);
-
-	err_idx[0] = (ecc1 >> 0) & 0x1FFF;
-	err_idx[1] = (ecc1 >> 13) & 0x1FFF;
-	err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
-	err_idx[3] = (ecc2 >> 7) & 0x1FFF;
-	err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
-	err_idx[5] = (ecc3 >> 1) & 0x1FFF;
-	err_idx[6] = (ecc3 >> 14) & 0x1FFF;
-	err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
-
-	i = 0;
-	while (i < num_err) {
-		err_idx[i] ^= 3;
-
-		if (err_idx[i] < 512 * 8)
-			__change_bit(err_idx[i], dat);
-
-		i++;
-	}
-
-	return num_err;
-}
-
-static int fsmc_read_hwecc(struct mtd_info *mtd,
-			const u_char *data, u_char *ecc)
-{
-	u_int ecc_tmp;
-	int timeout = CONFIG_SYS_HZ;
-	ulong start;
-
-	switch (fsmc_version) {
-	case FSMC_VER8:
-		start = get_timer(0);
-		while (get_timer(start) < timeout) {
-			/*
-			 * Busy waiting for ecc computation
-			 * to finish for 512 bytes
-			 */
-			if (readl(&fsmc_regs_p->sts) & FSMC_CODE_RDY)
-				break;
-		}
-
-		ecc_tmp = readl(&fsmc_regs_p->ecc1);
-		ecc[0] = (u_char) (ecc_tmp >> 0);
-		ecc[1] = (u_char) (ecc_tmp >> 8);
-		ecc[2] = (u_char) (ecc_tmp >> 16);
-		ecc[3] = (u_char) (ecc_tmp >> 24);
-
-		ecc_tmp = readl(&fsmc_regs_p->ecc2);
-		ecc[4] = (u_char) (ecc_tmp >> 0);
-		ecc[5] = (u_char) (ecc_tmp >> 8);
-		ecc[6] = (u_char) (ecc_tmp >> 16);
-		ecc[7] = (u_char) (ecc_tmp >> 24);
-
-		ecc_tmp = readl(&fsmc_regs_p->ecc3);
-		ecc[8] = (u_char) (ecc_tmp >> 0);
-		ecc[9] = (u_char) (ecc_tmp >> 8);
-		ecc[10] = (u_char) (ecc_tmp >> 16);
-		ecc[11] = (u_char) (ecc_tmp >> 24);
-
-		ecc_tmp = readl(&fsmc_regs_p->sts);
-		ecc[12] = (u_char) (ecc_tmp >> 16);
-		break;
-
-	default:
-		ecc_tmp = readl(&fsmc_regs_p->ecc1);
-		ecc[0] = (u_char) (ecc_tmp >> 0);
-		ecc[1] = (u_char) (ecc_tmp >> 8);
-		ecc[2] = (u_char) (ecc_tmp >> 16);
-		break;
-	}
-
-	return 0;
-}
-
-void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
-{
-	writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCPLEN_256,
-			&fsmc_regs_p->pc);
-	writel(readl(&fsmc_regs_p->pc) & ~FSMC_ECCEN,
-			&fsmc_regs_p->pc);
-	writel(readl(&fsmc_regs_p->pc) | FSMC_ECCEN,
-			&fsmc_regs_p->pc);
-}
-
-/*
- * fsmc_read_page_hwecc
- * @mtd:	mtd info structure
- * @chip:	nand chip info structure
- * @buf:	buffer to store read data
- * @oob_required:	caller expects OOB data read to chip->oob_poi
- * @page:	page number to read
- *
- * This routine is needed for fsmc verison 8 as reading from NAND chip has to be
- * performed in a strict sequence as follows:
- * data(512 byte) -> ecc(13 byte)
- * After this read, fsmc hardware generates and reports error data bits(upto a
- * max of 8 bits)
- */
-static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
-				 uint8_t *buf, int oob_required, int page)
-{
-	struct fsmc_eccplace *fsmc_eccpl;
-	int i, j, s, stat, eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	int eccsteps = chip->ecc.steps;
-	uint8_t *p = buf;
-	uint8_t *ecc_calc = chip->buffers->ecccalc;
-	uint8_t *ecc_code = chip->buffers->ecccode;
-	int off, len, group = 0;
-	uint8_t oob[13] __attribute__ ((aligned (2)));
-
-	/* Differentiate between small and large page ecc place definitions */
-	if (mtd->writesize == 512)
-		fsmc_eccpl = &fsmc_eccpl_sp;
-	else
-		fsmc_eccpl = &fsmc_eccpl_lp;
-
-	for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
-
-		chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
-		chip->ecc.hwctl(mtd, NAND_ECC_READ);
-		chip->read_buf(mtd, p, eccsize);
-
-		for (j = 0; j < eccbytes;) {
-			off = fsmc_eccpl->eccplace[group].offset;
-			len = fsmc_eccpl->eccplace[group].length;
-			group++;
-
-			/*
-			 * length is intentionally kept a higher multiple of 2
-			 * to read at least 13 bytes even in case of 16 bit NAND
-			 * devices
-			 */
-			if (chip->options & NAND_BUSWIDTH_16)
-				len = roundup(len, 2);
-			chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
-			chip->read_buf(mtd, oob + j, len);
-			j += len;
-		}
-
-		memcpy(&ecc_code[i], oob, 13);
-		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
-
-		stat = chip->ecc.correct(mtd, p, &ecc_code[i],
-				&ecc_calc[i]);
-		if (stat < 0)
-			mtd->ecc_stats.failed++;
-		else
-			mtd->ecc_stats.corrected += stat;
-	}
-
-	return 0;
-}
-
-int fsmc_nand_init(struct nand_chip *nand)
-{
-	static int chip_nr;
-	struct mtd_info *mtd;
-	u32 peripid2 = readl(&fsmc_regs_p->peripid2);
-
-	fsmc_version = (peripid2 >> FSMC_REVISION_SHFT) &
-		FSMC_REVISION_MSK;
-
-	writel(readl(&fsmc_regs_p->ctrl) | FSMC_WP, &fsmc_regs_p->ctrl);
-
-#if defined(CONFIG_SYS_FSMC_NAND_16BIT)
-	writel(FSMC_DEVWID_16 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
-			&fsmc_regs_p->pc);
-#elif defined(CONFIG_SYS_FSMC_NAND_8BIT)
-	writel(FSMC_DEVWID_8 | FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON,
-			&fsmc_regs_p->pc);
-#else
-#error Please define CONFIG_SYS_FSMC_NAND_16BIT or CONFIG_SYS_FSMC_NAND_8BIT
-#endif
-	writel(readl(&fsmc_regs_p->pc) | FSMC_TCLR_1 | FSMC_TAR_1,
-			&fsmc_regs_p->pc);
-	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
-			&fsmc_regs_p->comm);
-	writel(FSMC_THIZ_1 | FSMC_THOLD_4 | FSMC_TWAIT_6 | FSMC_TSET_0,
-			&fsmc_regs_p->attrib);
-
-	nand->options = 0;
-#if defined(CONFIG_SYS_FSMC_NAND_16BIT)
-	nand->options |= NAND_BUSWIDTH_16;
-#endif
-	nand->ecc.mode = NAND_ECC_HW;
-	nand->ecc.size = 512;
-	nand->ecc.calculate = fsmc_read_hwecc;
-	nand->ecc.hwctl = fsmc_enable_hwecc;
-	nand->cmd_ctrl = fsmc_nand_hwcontrol;
-	nand->IO_ADDR_R = nand->IO_ADDR_W =
-		(void  __iomem *)CFG_SYS_NAND_BASE;
-	nand->badblockbits = 7;
-
-	mtd = nand_to_mtd(nand);
-
-	switch (fsmc_version) {
-	case FSMC_VER8:
-		nand->ecc.bytes = 13;
-		nand->ecc.strength = 8;
-		nand->ecc.correct = fsmc_bch8_correct_data;
-		nand->ecc.read_page = fsmc_read_page_hwecc;
-		if (mtd->writesize == 512)
-			nand->ecc.layout = &fsmc_ecc4_sp_layout;
-		else {
-			if (mtd->oobsize == 224)
-				nand->ecc.layout = &fsmc_ecc4_224_layout;
-			else
-				nand->ecc.layout = &fsmc_ecc4_lp_layout;
-		}
-
-		break;
-	default:
-		nand->ecc.bytes = 3;
-		nand->ecc.strength = 1;
-		nand->ecc.layout = &fsmc_ecc1_layout;
-		nand->ecc.correct = nand_correct_data;
-		break;
-	}
-
-	/* Detect NAND chips */
-	if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL))
-		return -ENXIO;
-
-	if (nand_scan_tail(mtd))
-		return -ENXIO;
-
-	if (nand_register(chip_nr++, mtd))
-		return -ENXIO;
-
-	return 0;
-}
diff --git a/include/linux/mtd/fsmc_nand.h b/include/linux/mtd/fsmc_nand.h
deleted file mode 100644
index 1d8a067f17e..00000000000
--- a/include/linux/mtd/fsmc_nand.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2010
- * Vipin Kumar, STMicroelectronics, vipin.kumar at st.com.
- */
-
-#ifndef __FSMC_NAND_H__
-#define __FSMC_NAND_H__
-
-#include <linux/mtd/rawnand.h>
-
-struct fsmc_regs {
-	u32 ctrl;			/* 0x00 */
-	u8 reserved_1[0x40 - 0x04];
-	u32 pc;				/* 0x40 */
-	u32 sts;			/* 0x44 */
-	u32 comm;			/* 0x48 */
-	u32 attrib;			/* 0x4c */
-	u32 ioata;			/* 0x50 */
-	u32 ecc1;			/* 0x54 */
-	u32 ecc2;			/* 0x58 */
-	u32 ecc3;			/* 0x5c */
-	u8 reserved_2[0xfe0 - 0x60];
-	u32 peripid0;			/* 0xfe0 */
-	u32 peripid1;			/* 0xfe4 */
-	u32 peripid2;			/* 0xfe8 */
-	u32 peripid3;			/* 0xfec */
-	u32 pcellid0;			/* 0xff0 */
-	u32 pcellid1;			/* 0xff4 */
-	u32 pcellid2;			/* 0xff8 */
-	u32 pcellid3;			/* 0xffc */
-};
-
-/* ctrl register definitions */
-#define FSMC_WP			(1 << 7)
-
-/* pc register definitions */
-#define FSMC_RESET		(1 << 0)
-#define FSMC_WAITON		(1 << 1)
-#define FSMC_ENABLE		(1 << 2)
-#define FSMC_DEVTYPE_NAND	(1 << 3)
-#define FSMC_DEVWID_8		(0 << 4)
-#define FSMC_DEVWID_16		(1 << 4)
-#define FSMC_ECCEN		(1 << 6)
-#define FSMC_ECCPLEN_512	(0 << 7)
-#define FSMC_ECCPLEN_256	(1 << 7)
-#define FSMC_TCLR_1		(1 << 9)
-#define FSMC_TAR_1		(1 << 13)
-
-/* sts register definitions */
-#define FSMC_CODE_RDY		(1 << 15)
-
-/* comm register definitions */
-#define FSMC_TSET_0		(0 << 0)
-#define FSMC_TWAIT_6		(6 << 8)
-#define FSMC_THOLD_4		(4 << 16)
-#define FSMC_THIZ_1		(1 << 24)
-
-/* peripid2 register definitions */
-#define FSMC_REVISION_MSK	(0xf)
-#define FSMC_REVISION_SHFT	(0x4)
-
-#define FSMC_VER8		0x8
-
-/*
- * There are 13 bytes of ecc for every 512 byte block and it has to be read
- * consecutively and immediately after the 512 byte data block for hardware to
- * generate the error bit offsets
- * Managing the ecc bytes in the following way is easier. This way is similar to
- * oobfree structure maintained already in u-boot nand driver
- */
-#define FSMC_MAX_ECCPLACE_ENTRIES	32
-
-struct fsmc_nand_eccplace {
-	u32 offset;
-	u32 length;
-};
-
-struct fsmc_eccplace {
-	struct fsmc_nand_eccplace eccplace[FSMC_MAX_ECCPLACE_ENTRIES];
-};
-
-extern int fsmc_nand_init(struct nand_chip *nand);
-#endif
-- 
2.39.1.456.gfc5497dd1b-goog



More information about the U-Boot mailing list