[PATCH v3] arm: mvebu: Add support for Thecus N2350 (Armada 385) board

Tony Dinh mibodhi at gmail.com
Thu Feb 2 00:13:05 CET 2023


Thecus N2350 is a NAS based on Marvell Armada 385 SoC.

Specification:

- Processor: Marvel MV88F6820 Dual Core at 1GHz
- 1 GiB DDR4 RAM
- 4MB Macronix mx25l3205d SPI flash
- 512MB Hynix H27U4G8F2DTR-BC NAND flash
- I2C
- 2x USB 3.0
- 1x GBE LAN port (PHY: Marvell 88E1510)
- 2x SATA (hot swap slots)
- 3x buttons
- 10x LEDS
- serial console

Signed-off-by: Tony Dinh <mibodhi at gmail.com>
---

Changes in v3:
- Add missing DTS file path in MAINTAINERS file
- Remove "common.h" in board file
- Remove CFG_I2C_MVTWSI_BASE0 in include header file
- Cleanup unecessary comments in include header file

Changes in v2:
- Use node pointers already defined from armada-38x.dtsi in this board DTS
- Remove extra compatible attributes in this board DTS
- Remove unnecessary armada-385-thecus-n2350-u-boot.dtsi
- Remove unnecessary check_board() function in board file
- Remove unnecessary "default false" for DDR4 in arch/arm/mach-mvebu/Kconfig
- Use "rootfs" as partition name for NAND partition
- Various DTS naming convention correction

 arch/arm/dts/Makefile                    |   1 +
 arch/arm/dts/armada-385-thecus-n2350.dts | 446 +++++++++++++++++++++++
 arch/arm/mach-mvebu/Kconfig              |  11 +
 board/thecus/n2350/MAINTAINERS           |   7 +
 board/thecus/n2350/Makefile              |   6 +
 board/thecus/n2350/n2350.c               | 126 +++++++
 configs/n2350_defconfig                  |  93 +++++
 include/configs/n2350.h                  |  56 +++
 8 files changed, 746 insertions(+)
 create mode 100644 arch/arm/dts/armada-385-thecus-n2350.dts
 create mode 100644 board/thecus/n2350/MAINTAINERS
 create mode 100644 board/thecus/n2350/Makefile
 create mode 100644 board/thecus/n2350/n2350.c
 create mode 100644 configs/n2350_defconfig
 create mode 100644 include/configs/n2350.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 3ecd6a86e9..c5d1825a3b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
 	armada-385-atl-x530.dtb			\
 	armada-385-atl-x530DP.dtb		\
 	armada-385-db-88f6820-amc.dtb		\
+	armada-385-thecus-n2350.dtb		\
 	armada-385-turris-omnia.dtb		\
 	armada-388-clearfog.dtb			\
 	armada-388-gp.dtb			\
diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts
new file mode 100644
index 0000000000..fc29c4d25a
--- /dev/null
+++ b/arch/arm/dts/armada-385-thecus-n2350.dts
@@ -0,0 +1,446 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Device Tree file for Thecus N2350 board
+ *
+ * Copyright (C) 2018-2023 Tony Dinh <mibodhi at gmail.com>
+ * Copyright (C) 2018 Manuel Jung <manuel.jung at hotmail.com>
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-385.dtsi"
+
+/ {
+	model = "Thecus N2350";
+	compatible = "thecus,n2350", "marvell,armada385";
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x40000000>; /* 1GB */
+	};
+
+	soc {
+		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
+			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
+			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
+
+	};
+
+	usb3_0_phy: usb3_0_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_0_power>;
+	};
+
+	usb3_1_phy: usb3_1_phy {
+		compatible = "usb-nop-xceiv";
+		vcc-supply = <&usb3_1_power>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>;
+		pinctrl-names = "default";
+
+		button at 1 {
+			label = "Power Button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		button at 2 {
+			label = "Copy Button";
+			linux,code = <KEY_COPY>;
+			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
+		};
+
+		button at 3 {
+			label = "Reset Button";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-0 = <&pmx_sata1_white_led
+				&pmx_sata1_red_led
+				&pmx_sata2_white_led
+				&pmx_sata2_red_led
+				&pmx_sys_white_led
+				&pmx_sys_red_led
+				&pmx_pwr_blue_led
+				&pmx_pwr_red_led
+				&pmx_usb_white_led
+				&pmx_usb_red_led>;
+
+		pinctrl-names = "default";
+
+		white_sata1 {
+			label = "n2350:white:sata1";
+			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "ide-disk1";
+		};
+
+		red_sata1 {
+			label = "n2350:red:sata1";
+			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-sata2 {
+			label = "n2350:white:sata2";
+			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-sata2 {
+			label = "n2350:red:sata2";
+			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-sys {
+			label = "n2350:white:sys";
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		red-sys {
+			label = "n2350:red:sys";
+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue-pwr {
+			label = "n2350:blue:pwr";
+			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-pwr {
+			label = "n2350:red:pwr";
+			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		white-usb {
+			label = "n2350:white:usb";
+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		};
+
+		red-usb {
+			label = "n2350:red:usb";
+			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usb3_0_power: regulator at 1 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB3_0_Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+		};
+
+		usb3_1_power: regulator at 2 {
+			compatible = "regulator-fixed";
+			reg = <1>;
+			regulator-name = "USB3_1_Power";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_sata0: regulator at 3 {
+			compatible = "regulator-fixed";
+			regulator-name = "pwr_en_sata0";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_5v_sata0: v5-sata0 {
+			compatible = "regulator-fixed";
+			regulator-name = "v5.0-sata0";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&reg_sata0>;
+		};
+
+		reg_12v_sata0: v12-sata0 {
+			compatible = "regulator-fixed";
+			regulator-name = "v12.0-sata0";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			vin-supply = <&reg_sata0>;
+		};
+
+		reg_sata1: regulator at 4 {
+			regulator-name = "pwr_en_sata1";
+			compatible = "regulator-fixed";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			enable-active-high;
+			regulator-always-on;
+			regulator-boot-on;
+			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		reg_5v_sata1: v5-sata1 {
+			compatible = "regulator-fixed";
+			regulator-name = "v5.0-sata1";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			vin-supply = <&reg_sata1>;
+		};
+
+		reg_12v_sata1: v12-sata1 {
+			compatible = "regulator-fixed";
+			regulator-name = "v12.0-sata1";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			vin-supply = <&reg_sata1>;
+		};
+
+	};
+
+	gpio-poweroff {
+		compatible = "gpio-poweroff";
+		pinctrl-0 = <&pmx_pwr_off>;
+		pinctrl-names = "default";
+		gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&ahci0 {
+	status = "okay";
+};
+
+&bm {
+	status = "okay";
+};
+
+&bm_bppi {
+	status = "okay";
+};
+
+&eth0 {
+	status = "okay";
+	phy = <&phy0>;
+	phy-mode = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <0>;
+	bm,pool-short = <1>;
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&mdio {
+	phy0: ethernet-phy at 0 {
+		reg = <1>;
+	};
+};
+
+&nand_controller {
+	status = "okay";
+
+	nand at 0 {
+		status = "okay";
+		reg = <0>;
+		label = "pxa3xx_nand-0";
+		nand-rb = <0>;
+		marvell,nand-keep-config;
+		nand-on-flash-bbt;
+		nand-ecc-strength = <4>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition at 0 {
+				label = "rootfs";
+				reg = <0x00000000 0x20000000>;
+			};
+
+		};
+	};
+};
+
+&pciec {
+	status = "okay";
+	/*
+	 * The two PCIe units are accessible through
+	 * standard PCIe slots on the board.
+	 */
+	pcie at 1,0 {
+		/* Port 0, Lane 0 */
+		status = "okay";
+	};
+	pcie at 2,0 {
+		/* Port 1, Lane 0 */
+		status = "okay";
+	};
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+
+	pmx_power_button: pmx-power-button {
+		marvell,pins = "mpp49";
+		marvell,function = "gpio";
+	};
+
+	pmx_copy_button: pmx-copy-button {
+		marvell,pins = "mpp52";
+		marvell,function = "gpio";
+	};
+
+	pmx_reset_button: pmx-reset-button {
+		marvell,pins = "mpp50";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_white_led: pmx-sata1-white-led {
+		marvell,pins = "mpp20";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata1_red_led: pmx-sata1-red-led {
+		marvell,pins = "mpp46";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata2_white_led: pmx-sata2-white-led {
+		marvell,pins = "mpp19";
+		marvell,function = "gpio";
+	};
+
+	pmx_sata2_red_led: pmx-sata2-red-led {
+		marvell,pins = "mpp47";
+		marvell,function = "gpio";
+	};
+
+	pmx_sys_white_led: pmx-sys-white-led {
+		marvell,pins = "mpp14";
+		marvell,function = "gpio";
+	};
+
+	pmx_sys_red_led: pmx-sys-red-led {
+		marvell,pins = "mpp15";
+		marvell,function = "gpio";
+	};
+
+	pmx_buzzer: pmx-buzzer {
+		marvell,pins = "mpp51";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_off: pmx-pwr-off {
+		marvell,pins = "mpp54";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_blue_led: pmx-pwr-blue-led {
+		marvell,pins = "mpp43";
+		marvell,function = "gpio";
+	};
+
+	pmx_pwr_red_led: pmx-pwr-red-led {
+		marvell,pins = "mpp18";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_white_led: pmx-usb-white-led {
+		marvell,pins = "mpp16";
+		marvell,function = "gpio";
+	};
+
+	pmx_usb_red_led: pmx-usb-red-led {
+		marvell,pins = "mpp17";
+		marvell,function = "gpio";
+	};
+};
+
+&sdhci {
+	broken-cd;
+	wp-inverted;
+	bus-width = <8>;
+	status = "okay";
+	no-1-8-v;
+};
+
+&spi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi1_pins>;
+	status = "okay";
+
+	/* spi: 4M Flash Macronix MX25L3205D */
+	spi-flash at 0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "macronix,mx25l3205d", "jedec,spi-nor";
+		reg = <0>;
+
+		spi-max-frequency = <108000000>;
+		spi-cpha;
+
+		partition at 0 {
+			label = "u-boot";
+			reg = <0x00000000 0x00100000>;
+		};
+
+		partition at 100000 {
+			label = "u-boot-env";
+			reg = <0x00100000 0x00010000>;
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&usb0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index 594e9a03d9..f829e40945 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -97,6 +97,9 @@ config 88F6820
 config CUSTOMER_BOARD_SUPPORT
 	bool
 
+config DDR4
+	bool "Support Marvell DDR4 Training driver"
+
 choice
 	prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select"
 	optional
@@ -175,6 +178,11 @@ config TARGET_MAXBCM
 	select BOARD_ECC_SUPPORT
 	select MV78460
 
+config TARGET_N2350
+	bool "Support Thecus N2350"
+	select 88F6820
+	select DDR4
+
 config TARGET_THEADORABLE
 	bool "Support theadorable Armada XP"
 	select BOARD_LATE_INIT if USB
@@ -257,6 +265,7 @@ config SYS_BOARD
 	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
 	default "ds414" if TARGET_DS414
 	default "maxbcm" if TARGET_MAXBCM
+	default "n2350" if TARGET_N2350
 	default "theadorable" if TARGET_THEADORABLE
 	default "a38x" if TARGET_CONTROLCENTERDC
 	default "x530" if TARGET_X530
@@ -276,6 +285,7 @@ config SYS_CONFIG_NAME
 	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
 	default "ds414" if TARGET_DS414
 	default "maxbcm" if TARGET_MAXBCM
+	default "n2350" if TARGET_N2350
 	default "theadorable" if TARGET_THEADORABLE
 	default "turris_omnia" if TARGET_TURRIS_OMNIA
 	default "turris_mox" if TARGET_TURRIS_MOX
@@ -298,6 +308,7 @@ config SYS_VENDOR
 	default "solidrun" if TARGET_CLEARFOG
 	default "kobol" if TARGET_HELIOS4
 	default "Synology" if TARGET_DS414
+	default "thecus" if TARGET_N2350
 	default "CZ.NIC" if TARGET_TURRIS_OMNIA
 	default "CZ.NIC" if TARGET_TURRIS_MOX
 	default "gdsys" if TARGET_CONTROLCENTERDC
diff --git a/board/thecus/n2350/MAINTAINERS b/board/thecus/n2350/MAINTAINERS
new file mode 100644
index 0000000000..2b8774f8fb
--- /dev/null
+++ b/board/thecus/n2350/MAINTAINERS
@@ -0,0 +1,7 @@
+N2350  BOARD
+M:	Tony Dinh <mibodhi at gmail.com>
+S:	Maintained
+F:	arch/arm/dts/armada-385-thecus-n2350.dts
+F:	board/thecus/n2350/
+F:	include/configs/n2350.h
+F:	configs/n2350_defconfig
diff --git a/board/thecus/n2350/Makefile b/board/thecus/n2350/Makefile
new file mode 100644
index 0000000000..b220bb1925
--- /dev/null
+++ b/board/thecus/n2350/Makefile
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
+#
+
+obj-y	:= n2350.o
diff --git a/board/thecus/n2350/n2350.c b/board/thecus/n2350/n2350.c
new file mode 100644
index 0000000000..4cfdfba662
--- /dev/null
+++ b/board/thecus/n2350/n2350.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
+ *
+ */
+
+#include <i2c.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+#include <linux/bitops.h>
+
+#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
+#include <../serdes/a38x/high_speed_env_spec.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Those N2350_GPP_xx values and defines in board_serdes_map, and board_topology_map
+ * are taken from the Marvell U-Boot version "u-boot-a38x-2015T1_p18_Thecus"
+ */
+
+#define N2350_GPP_OUT_ENA_LOW	(~(BIT(20) | BIT(21) | BIT(24)))
+#define N2350_GPP_OUT_ENA_MID	(~(BIT(12) | BIT(13) | BIT(16) | BIT(19) | BIT(22)))
+#define N2350_GPP_OUT_VAL_LOW	0x1200000
+#define N2350_GPP_OUT_VAL_MID	0x1001
+#define N2350_GPP_POL_LOW	0x0
+#define N2350_GPP_POL_MID	0x0
+
+static struct serdes_map board_serdes_map[] = {
+	{ SGMII0, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{ SATA0,  SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{ SATA1,  SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{ DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{ USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+	{ USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
+};
+
+int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
+{
+	*serdes_map_array = board_serdes_map;
+	*count = ARRAY_SIZE(board_serdes_map);
+	return 0;
+}
+
+/*
+ * Define the DDR layout / topology here in the board file. This will
+ * be used by the DDR4 init code in the SPL U-Boot version to configure
+ * the DDR4 controller.
+ */
+
+static struct mv_ddr_topology_map board_topology_map = {
+	DEBUG_LEVEL_ERROR,
+	0x1, /* active interfaces */
+	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
+	{ { { {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0},
+	      {0x1, 0, 0, 0} },
+	    SPEED_BIN_DDR_1866L,        /* speed_bin */
+	    MV_DDR_DEV_WIDTH_16BIT,     /* memory_width - 16 bits */
+	    MV_DDR_DIE_CAP_4GBIT,       /* mem_size - N2350 board has 2x512MB DRAM banks */
+	    MV_DDR_FREQ_800,            /* frequency */
+	    0, 0,			/* cas_wl cas_l */
+	    MV_DDR_TEMP_LOW,		/* temperature */
+	    MV_DDR_TIM_DEFAULT} },	/* timing */
+	BUS_MASK_32BIT,			/* Busses mask */
+	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
+	NOT_COMBINED,			/* ddr twin-die combined */
+	{ {0} },			/* raw spd data */
+	{0}				/* timing parameters */
+};
+
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
+{
+	/* Return the board topology as defined in the board code */
+	return &board_topology_map;
+}
+
+int board_early_init_f(void)
+{
+	/* Those MPP values are taken from the Marvell U-Boot version
+	 * "u-boot-a38x-2015T1_p18_Thecus"
+	 */
+
+	/* Configure MPP */
+	writel(0x50111111, MVEBU_MPP_BASE + 0x00);	/* MPP0_7 */
+	writel(0x00555555, MVEBU_MPP_BASE + 0x04);	/* MPP8_15 */
+	writel(0x55000000, MVEBU_MPP_BASE + 0x08);	/* MPP16_23 */
+	writel(0x05050050, MVEBU_MPP_BASE + 0x0c);	/* MPP24_31 */
+	writel(0x05555555, MVEBU_MPP_BASE + 0x10);	/* MPP32_39 */
+	writel(0x00000565, MVEBU_MPP_BASE + 0x14);	/* MPP40_47 */
+	writel(0x00000000, MVEBU_MPP_BASE + 0x18);	/* MPP48_55 */
+	writel(0x00004444, MVEBU_MPP_BASE + 0x1c);	/* MPP56_63 */
+
+	/* Set GPP Out value */
+	writel(N2350_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+	writel(N2350_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
+
+	/* Set GPP Polarity */
+	writel(N2350_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
+	writel(N2350_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
+
+	/* Set GPP Out Enable */
+	writel(N2350_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+	writel(N2350_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
+
+	return 0;
+}
+
+int board_init(void)
+{
+	/* Address of boot parameters */
+	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+	return 0;
+}
+
+int board_eth_init(struct bd_info *bis)
+{
+	cpu_eth_init(bis); /* Built in controller(s) come first */
+	return pci_eth_init(bis);
+}
diff --git a/configs/n2350_defconfig b/configs/n2350_defconfig
new file mode 100644
index 0000000000..dcb2c96791
--- /dev/null
+++ b/configs/n2350_defconfig
@@ -0,0 +1,93 @@
+CONFIG_ARM=y
+CONFIG_ARCH_CPU_INIT=y
+CONFIG_SYS_THUMB_BUILD=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_SUPPORT_PASSING_ATAGS=y
+CONFIG_CMDLINE_TAG=y
+CONFIG_INITRD_TAG=y
+CONFIG_TEXT_BASE=0x00800000
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
+CONFIG_TARGET_N2350=y
+CONFIG_ENV_SIZE=0x10000
+CONFIG_ENV_OFFSET=0x100000
+CONFIG_ENV_SECT_SIZE=0x10000
+CONFIG_DEFAULT_DEVICE_TREE="armada-385-thecus-n2350"
+CONFIG_SPL_TEXT_BASE=0x40000030
+CONFIG_SYS_PROMPT="N2350 > "
+CONFIG_SPL_SERIAL=y
+CONFIG_SPL_STACK=0x4002c000
+CONFIG_SPL=y
+CONFIG_DEBUG_UART_BASE=0xf1012000
+CONFIG_DEBUG_UART_CLOCK=250000000
+CONFIG_IDENT_STRING="\nThecus N2350"
+CONFIG_SYS_LOAD_ADDR=0x800000
+CONFIG_ENV_ADDR=0x100000
+CONFIG_DEBUG_UART=y
+CONFIG_AHCI=y
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_BOOTDELAY=10
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_CONSOLE_INFO_QUIET=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SPL_MAX_SIZE=0x22fd0
+CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
+CONFIG_SPL_BSS_START_ADDR=0x40023000
+CONFIG_SPL_BSS_MAX_SIZE=0x4000
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
+CONFIG_SPL_I2C=y
+CONFIG_SYS_MAXARGS=32
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPIO_READ=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_PCI=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_TFTPPUT=y
+CONFIG_CMD_SNTP=y
+CONFIG_CMD_DNS=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_MTDPARTS=y
+CONFIG_MTDPARTS_DEFAULT="mtdparts=pxa3xx_nand-0:-(rootfs);spi1.0:1M(u-boot),64K at 1M(u-boot-env),-(data)"
+CONFIG_ENV_OVERWRITE=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_ARP_TIMEOUT=200
+CONFIG_NET_RETRY_COUNT=50
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_NETCONSOLE=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_LBA48=y
+CONFIG_SYS_64BIT_LBA=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MVTWSI=y
+CONFIG_MTD=y
+CONFIG_SF_DEFAULT_SPEED=50000000
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PHY_MARVELL=y
+CONFIG_PHY_GIGE=y
+CONFIG_MVNETA=y
+CONFIG_MII=y
+CONFIG_MVMDIO=y
+CONFIG_PCI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_38X=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_ARMADA38X=y
+CONFIG_SCSI=y
+CONFIG_SPL_DEBUG_UART_BASE=0xd0012000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_SYS_NS16550=y
+CONFIG_KIRKWOOD_SPI=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
diff --git a/include/configs/n2350.h b/include/configs/n2350.h
new file mode 100644
index 0000000000..92b2270236
--- /dev/null
+++ b/include/configs/n2350.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
+ *
+ */
+
+#ifndef _CONFIG_N2350_H
+#define _CONFIG_N2350_H
+
+#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
+
+/* Keep device tree and initrd in lower memory so the kernel can access them */
+#define RELOCATION_LIMITS_ENV_SETTINGS  \
+	"fdt_high=0x10000000\0"         \
+	"initrd_high=0x10000000\0"
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+/* Include the common distro boot environment */
+#ifndef CONFIG_SPL_BUILD
+
+#define BOOT_TARGET_DEVICES(func) \
+	func(SCSI, scsi, 0) \
+	func(USB, usb, 0) \
+	func(PXE, pxe, na) \
+	func(DHCP, dhcp, na)
+
+#define KERNEL_ADDR_R	__stringify(0x1000000)
+#define FDT_ADDR_R	__stringify(0x2000000)
+#define RAMDISK_ADDR_R	__stringify(0x2200000)
+#define SCRIPT_ADDR_R	__stringify(0x1800000)
+#define PXEFILE_ADDR_R	__stringify(0x1900000)
+
+#define LOAD_ADDRESS_ENV_SETTINGS \
+	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
+	"fdt_addr_r=" FDT_ADDR_R "\0" \
+	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
+	"scriptaddr=" SCRIPT_ADDR_R "\0" \
+	"pxefile_addr_r=" PXEFILE_ADDR_R "\0"
+
+#include <config_distro_bootcmd.h>
+
+#define CFG_EXTRA_ENV_SETTINGS \
+	RELOCATION_LIMITS_ENV_SETTINGS \
+	LOAD_ADDRESS_ENV_SETTINGS \
+	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
+	"console=ttyS0,115200\0" \
+	BOOTENV
+
+#endif /* CONFIG_SPL_BUILD */
+
+#endif /* _CONFIG_N2350_H */
-- 
2.30.2



More information about the U-Boot mailing list