[PATCH V4 00/14] IOT2050-related enhancements

[Jan Kiszka]

(Almost) flushing our upstream queue for the IOT2050 device, this mostly
brings board-specific changes such as:

 - updated build process and firmware layout for PG1 vs. PG2 devices
 - more watchdog preparations
 - preparations for verified boot on IOT2050 Advanced devices

There are also some generic extensions in this series which are
dependencies for the above:

 - env: Complete generic support for writable list
 - env: Couple networking-related variable flags to CONFIG_NET (repost)
 - tools: Add script for converting public key into device tree include

Changes in v4:
 - rebased over latest master
 - make use of new CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN

Changes in v3:
 - further reworked patch 1 to load default env directly, leaving driver
   ordering alone

Changes in v2:
 - rebased over latest master
 - reworked patch 1 to be less invasive to the code
 - added "iot2050: use the named gpio to control the user-button"

Still in our backlog is support for a new variant that comes with M.2
slots. Related DT patches were sent to the kernel and are under review
now.

Jan

CC: chao zeng <chao.zeng at siemens.com>
CC: Joe Hershberger <joe.hershberger at ni.com>
CC: Marek Vasut <marex at denx.de>
CC: Stefan Herbrechtsmeier <stefan.herbrechtsmeier-oss at weidmueller.com>
CC: Su Baocheng <baocheng.su at siemens.com>

Jan Kiszka (11):
  env: Complete generic support for writable list
  env: Couple networking-related variable flags to CONFIG_NET
  tools: Add script for converting public key into device tree include
  iot2050: Update firmware layout
  iot2050: Add watchdog start to bootcmd
  iot2050: Add CONFIG_ENV_FLAGS_LIST_STATIC
  arm: dts: iot2050: Allow verifying U-Boot proper by SPL
  iot2050: Add script for signing artifacts
  arm: dts: iot2050: Optionally embed  OTP programming data into image
  doc: iot2050: Add a note about the watchdog firmware
  iot2050: Refresh defconfigs and activate
    CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN

Su Baocheng (2):
  board: siemens: iot2050: Split the build for PG1 and PG2
  arm: dts: iot2050: Use the auto generator nodes for fdt

chao zeng (1):
  board: siemens: iot2050: use the named gpio to control the user-button

 arch/arm/dts/k3-am65-iot2050-boot-image.dtsi  | 134 ++++++------------
 board/siemens/iot2050/Kconfig                 |  35 ++++-
 board/siemens/iot2050/board.c                 |  17 +--
 ...ot2050_defconfig => iot2050_pg1_defconfig} |  13 +-
 ...ot2050_defconfig => iot2050_pg2_defconfig} |  15 +-
 doc/board/siemens/iot2050.rst                 |  79 ++++++++++-
 env/Kconfig                                   |   1 +
 env/env.c                                     |   8 ++
 env/flags.c                                   |  10 +-
 include/configs/iot2050.h                     |  17 +++
 include/env_flags.h                           |   4 +-
 tools/binman/missing-blob-help                |  14 +-
 tools/iot2050-sign-fw.sh                      |  51 +++++++
 tools/key2dtsi.py                             |  64 +++++++++
 14 files changed, 325 insertions(+), 137 deletions(-)
 copy configs/{iot2050_defconfig => iot2050_pg1_defconfig} (93%)
 rename configs/{iot2050_defconfig => iot2050_pg2_defconfig} (91%)
 create mode 100755 tools/iot2050-sign-fw.sh
 create mode 100755 tools/key2dtsi.py

-- 
2.35.3