[PATCH V4 14/14] iot2050: Refresh defconfigs and activate CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN

Jan Kiszka jan.kiszka at siemens.com
Thu Feb 2 09:07:59 CET 2023


From: Jan Kiszka <jan.kiszka at siemens.com>

This feature is desired on the platform.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
 configs/iot2050_pg1_defconfig | 6 +++---
 configs/iot2050_pg2_defconfig | 7 +++----
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/configs/iot2050_pg1_defconfig b/configs/iot2050_pg1_defconfig
index 6c6af35cdee..6f2ab72f921 100644
--- a/configs/iot2050_pg1_defconfig
+++ b/configs/iot2050_pg1_defconfig
@@ -9,6 +9,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_AM654=y
 CONFIG_TARGET_IOT2050_A53_PG1=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x680000
 CONFIG_ENV_SECT_SIZE=0x20000
@@ -23,11 +25,8 @@ CONFIG_ENV_OFFSET_REDUND=0x6a0000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTSTAGE=y
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -147,3 +146,4 @@ CONFIG_WDT=y
 CONFIG_WDT_K3_RTI=y
 CONFIG_WDT_K3_RTI_LOAD_FW=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
diff --git a/configs/iot2050_pg2_defconfig b/configs/iot2050_pg2_defconfig
index 43410160c8a..d2bdeab593b 100644
--- a/configs/iot2050_pg2_defconfig
+++ b/configs/iot2050_pg2_defconfig
@@ -9,6 +9,8 @@ CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
 CONFIG_SOC_K3_AM654=y
 CONFIG_TARGET_IOT2050_A53_PG2=y
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000
 CONFIG_ENV_SIZE=0x20000
 CONFIG_ENV_OFFSET=0x680000
 CONFIG_ENV_SECT_SIZE=0x20000
@@ -23,11 +25,8 @@ CONFIG_ENV_OFFSET_REDUND=0x6a0000
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
 CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80100000
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
-# CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_BOOTSTAGE=y
 CONFIG_SHOW_BOOT_PROGRESS=y
@@ -76,7 +75,6 @@ CONFIG_SPL_OF_LIST="k3-am65-iot2050-spl"
 CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
 CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
-CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
 CONFIG_SPL_REGMAP=y
@@ -148,3 +146,4 @@ CONFIG_WDT=y
 CONFIG_WDT_K3_RTI=y
 CONFIG_WDT_K3_RTI_LOAD_FW=y
 CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_EFI_SCROLL_ON_CLEAR_SCREEN=y
-- 
2.35.3



More information about the U-Boot mailing list