[PATCH v2 2/5] net: sun8i-emac: Add a flag for RMII support

Ramon Fried rfried.dev at gmail.com
Sat Feb 4 01:36:45 CET 2023


On Mon, Jan 23, 2023 at 7:23 PM Andre Przywara <andre.przywara at arm.com> wrote:
>
> On 22/01/2023 22:51, Samuel Holland wrote:
> > Describe this feature instead of using the SoC ID.
>
> Looks alright, also compared against the kernel driver.
>
> > Signed-off-by: Samuel Holland <samuel at sholland.org>
>
> Reviewed-by: Andre Przywara <andre.przywara at arm.com>
>
> Cheers,
> Andre
>
> > ---
> >
> > Changes in v2:
> >   - New patch for v2
> >
> >   drivers/net/sun8i_emac.c | 15 +++++++--------
> >   1 file changed, 7 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c
> > index 986e565cd8..f232b8f087 100644
> > --- a/drivers/net/sun8i_emac.c
> > +++ b/drivers/net/sun8i_emac.c
> > @@ -137,6 +137,7 @@ enum emac_variant_id {
> >
> >   struct emac_variant {
> >       enum emac_variant_id    variant;
> > +     bool                    support_rmii;
> >   };
> >
> >   struct emac_dma_desc {
> > @@ -337,9 +338,7 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
> >       reg = sun8i_emac_set_syscon_ephy(priv, reg);
> >
> >       reg &= ~(SC_ETCS_MASK | SC_EPIT);
> > -     if (priv->variant->variant == H3_EMAC ||
> > -         priv->variant->variant == A64_EMAC ||
> > -         priv->variant->variant == H6_EMAC)
> > +     if (priv->variant->support_rmii)
> >               reg &= ~SC_RMII_EN;
> >
> >       switch (priv->interface) {
> > @@ -353,13 +352,10 @@ static int sun8i_emac_set_syscon(struct sun8i_eth_pdata *pdata,
> >               reg |= SC_EPIT | SC_ETCS_INT_GMII;
> >               break;
> >       case PHY_INTERFACE_MODE_RMII:
> > -             if (priv->variant->variant == H3_EMAC ||
> > -                 priv->variant->variant == A64_EMAC ||
> > -                 priv->variant->variant == H6_EMAC) {
> > +             if (priv->variant->support_rmii) {
> >                       reg |= SC_RMII_EN | SC_ETCS_EXT_GMII;
> > -             break;
> > +                     break;
> >               }
> > -             /* RMII not supported on A83T */
> >       default:
> >               debug("%s: Invalid PHY interface\n", __func__);
> >               return -EINVAL;
> > @@ -910,6 +906,7 @@ static const struct emac_variant emac_variant_a83t = {
> >
> >   static const struct emac_variant emac_variant_h3 = {
> >       .variant                = H3_EMAC,
> > +     .support_rmii           = true,
> >   };
> >
> >   static const struct emac_variant emac_variant_r40 = {
> > @@ -918,10 +915,12 @@ static const struct emac_variant emac_variant_r40 = {
> >
> >   static const struct emac_variant emac_variant_a64 = {
> >       .variant                = A64_EMAC,
> > +     .support_rmii           = true,
> >   };
> >
> >   static const struct emac_variant emac_variant_h6 = {
> >       .variant                = H6_EMAC,
> > +     .support_rmii           = true,
> >   };
> >
> >   static const struct udevice_id sun8i_emac_eth_ids[] = {
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list