[PATCH V6 09/13] iot2050: Add script for signing artifacts

[Jan Kiszka]

From: Jan Kiszka <jan.kiszka at siemens.com>

There are many ways to get a signed firmware for the IOT2050 devices,
namely for the parts under user-control. This script documents one way
of doing it, given a signing key. Augment the board documentation with
the required procedure around it.

Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
 doc/board/siemens/iot2050.rst | 52 +++++++++++++++++++++++++++++++++++
 tools/iot2050-sign-fw.sh      | 51 ++++++++++++++++++++++++++++++++++
 2 files changed, 103 insertions(+)
 create mode 100755 tools/iot2050-sign-fw.sh

diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst
index 26972e20ae9..4e0925c72c9 100644
--- a/doc/board/siemens/iot2050.rst
+++ b/doc/board/siemens/iot2050.rst
@@ -79,3 +79,55 @@ Via external programmer Dediprog SF100 or SF600:
 .. code-block:: text
 
  $ dpcmd --vcc 2 -v -u flash.bin
+
+Signing (optional)
+------------------
+
+To enable verified boot for the firmware artifacts after the Siemens-managed
+first-stage loader (seboot_pg*.bin), the following steps need to be taken
+before and after the build:
+
+Generate dtsi holding the public key
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. code-block:: text
+
+ tools/key2dtsi.py -c -s key.pem public-key.dtsi
+
+This will be used to embed the public key into U-Boot SPL and main so that each
+step can validate signatures of the succeeding one.
+
+Adjust U-Boot configuration
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Enabled at least the following options in U-Boot:
+
+.. code-block:: text
+
+ CONFIG_SPL_FIT_SIGNATURE=y
+ CONFIG_DEVICE_TREE_INCLUDES="/path/to/public-key.dtsi"
+ CONFIG_RSA=y
+
+Note that there are more configuration changes needed in order to lock-down
+the command line and the boot process of U-Boot for secure scenarios. These are
+not in scope here.
+
+Build U-Boot
+^^^^^^^^^^^^
+
+See related section above.
+
+Sign flash.bin
+^^^^^^^^^^^^^^
+
+In the build folder still containing artifacts from step 3, invoke:
+
+.. code-block:: text
+
+ tools/iot2050-sign-fw.sh /path/to/key.pem
+
+Flash signed flash.bin
+^^^^^^^^^^^^^^^^^^^^^^
+
+The signing has happen in-place in flash.bin, thus the flashing procedure
+described above.
diff --git a/tools/iot2050-sign-fw.sh b/tools/iot2050-sign-fw.sh
new file mode 100755
index 00000000000..4d1d79498c2
--- /dev/null
+++ b/tools/iot2050-sign-fw.sh
@@ -0,0 +1,51 @@
+#!/bin/sh
+
+if [ -z "$1" ]; then
+	echo "Usage: $0 KEY"
+	exit 1
+fi
+
+TEMP_X509=$(mktemp XXXXXXXX.temp)
+
+REVISION=${2:-0}
+SHA_VAL=$(openssl dgst -sha512 -hex tispl.bin | sed -e "s/^.*= //g")
+BIN_SIZE=$(stat -c %s tispl.bin)
+
+cat <<EOF >$TEMP_X509
+[ req ]
+distinguished_name     = req_distinguished_name
+x509_extensions        = v3_ca
+prompt                 = no
+dirstring_type         = nobmp
+
+[ req_distinguished_name ]
+CN                     = IOT2050 Firmware Signature
+
+[ v3_ca ]
+basicConstraints       = CA:true
+1.3.6.1.4.1.294.1.3    = ASN1:SEQUENCE:swrv
+1.3.6.1.4.1.294.1.34   = ASN1:SEQUENCE:sysfw_image_integrity
+
+[ swrv ]
+swrv = INTEGER:$REVISION
+
+[ sysfw_image_integrity ]
+shaType                = OID:2.16.840.1.101.3.4.2.3
+shaValue               = FORMAT:HEX,OCT:$SHA_VAL
+imageSize              = INTEGER:$BIN_SIZE
+EOF
+
+CERT_X509=$(mktemp XXXXXXXX.crt)
+
+openssl req -new -x509 -key $1 -nodes -outform DER -out $CERT_X509 -config $TEMP_X509 -sha512
+cat $CERT_X509 tispl.bin > tispl.bin_signed
+# currently broken in upstream
+#source/tools/binman/binman replace -i flash.bin -f tispl.bin_signed blob at 0x180000
+dd if=tispl.bin_signed of=flash.bin bs=$((0x1000)) seek=$((0x180000/0x1000)) conv=notrunc
+
+rm $TEMP_X509 $CERT_X509
+
+tools/mkimage -G $1 -r -o sha256,rsa4096 -F fit at 0x380000.fit
+# currently broken in upstream
+#source/tools/binman/binman replace -i flash.bin -f fit at 0x380000.fit fit at 0x380000
+dd if=fit at 0x380000.fit of=flash.bin bs=$((0x1000)) seek=$((0x380000/0x1000)) conv=notrunc
-- 
2.35.3