[PATCH 2/3] rockchip: Require an external TPL binary when TPL is missing

Quentin Schulz quentin.schulz at theobroma-systems.com
Mon Feb 6 12:26:09 CET 2023


Hi Jonas,

On 2/5/23 21:21, Jonas Karlman wrote:
> Rockchip SoCs typically use U-Boot TPL to initialize DRAM, then jumps
> back to boot-rom to load the next stage of the boot flow, U-Boot SPL.
> 
> For RK356x there is currently no support to initialize DRAM using U-Boot
> TPL and instead an external TPL binary must be used to generate a
> working u-boot-rockchip.bin image.
> 
> Use the new external-tpl entry unless CONFIG_TPL=y to indicate that an
> external TPL binary must be provided to generate a working firmware.
> 
> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
> ---
>   Makefile                          |  1 +
>   arch/arm/dts/rockchip-u-boot.dtsi | 16 ++++++++++++----
>   tools/binman/missing-blob-help    |  5 +++++
>   3 files changed, 18 insertions(+), 4 deletions(-)
> 
> diff --git a/Makefile b/Makefile
> index 7eaf45496c1c..7e9272be937f 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -1332,6 +1332,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
>   		-a opensbi-path=${OPENSBI} \
>   		-a default-dt=$(default_dt) \
>   		-a scp-path=$(SCP) \
> +		-a external-tpl-path=$(EXTERNAL_TPL) \
>   		-a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
>   		-a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
>   		-a spl-dtb=$(CONFIG_SPL_OF_REAL) \
> diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
> index 6c662a72d4f9..bc3bc9bc3e37 100644
> --- a/arch/arm/dts/rockchip-u-boot.dtsi
> +++ b/arch/arm/dts/rockchip-u-boot.dtsi
> @@ -20,12 +20,16 @@
>   		mkimage {
>   			filename = "idbloader.img";
>   			args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
> -#ifdef CONFIG_TPL
>   			multiple-data-files;
>   
> +#ifdef CONFIG_TPL
>   			u-boot-tpl {
> -			};
> +#else
> +			external-tpl {
> +				filename = "ddr.bin";
> +				missing-msg = "external-tpl-rockchip";
>   #endif
> +			};

NACK. This forces the use of a TPL (either built by U-Boot or external) 
which is not always the case. There are still boards without a TPL which 
work perfectly fine (at least I would hope so :) ).

Basically there are three possible cases:
SPL
TPL+SPL
TPL(external blob)+SPL

Here you remove the ability to have SPL only.

Hence why I suggested we add a new Kconfig option for EXTERNAL_TPL, not 
for the path but to explicit this third possibility.

Cheers,
Quentin

>   			u-boot-spl {
>   			};
>   		};
> @@ -134,12 +138,16 @@
>   		mkimage {
>   			filename = "idbloader-spi.img";
>   			args = "-n", CONFIG_SYS_SOC, "-T", "rkspi";
> -#ifdef CONFIG_TPL
>   			multiple-data-files;
>   
> +#ifdef CONFIG_TPL
>   			u-boot-tpl {
> -			};
> +#else
> +			external-tpl {
> +				filename = "ddr.bin";
> +				missing-msg = "external-tpl-rockchip";
>   #endif
> +			};
>   			u-boot-spl {
>   			};
>   		};
> diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help
> index c61ca02a35ee..e850824032dd 100644
> --- a/tools/binman/missing-blob-help
> +++ b/tools/binman/missing-blob-help
> @@ -14,6 +14,11 @@ atf-bl31-sunxi:
>   Please read the section on ARM Trusted Firmware (ATF) in
>   board/sunxi/README.sunxi64
>   
> +external-tpl-rockchip:
> +External TPL is required to initialize DRAM. Get external TPL binary and
> +build with EXTERNAL_TPL=/path/to/ddr.bin. One possible source for
> +external TPL binary is https://urldefense.com/v3/__https://github.com/rockchip-linux/rkbin__;!!OOPJP91ZZw!jRwonQRHKoxzegx3S3cRYfalkhW1ESLyBCTmVc2c6fnmPaQBOZyxG2I7phwM3pEZxR2QIHQG8Hw3JStyx4tDcMsalwYDCg$ .
> +
>   scp-sunxi:
>   SCP firmware is required for system suspend, but is otherwise optional.
>   Please read the section on SCP firmware in board/sunxi/README.sunxi64


More information about the U-Boot mailing list