[PATCH v3 81/81] Makefile: Drop SPL_ and SPL_TPL_ macros

Mon Feb 6 20:05:49 CET 2023

These are not needed anymore with split configs. Drop them.

This also drops an incorrect $(SPL_TPL) in arch/powerpc/lib/Makefile

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v2)

Changes in v2:
- Reworked based on earlier patches
- Move patches from splb which add new Kconfig options

 Makefile                                   |  6 +-
 arch/arm/config.mk                         |  6 +-
 arch/arm/cpu/arm920t/Makefile              |  2 +-
 arch/arm/cpu/arm926ejs/Makefile            |  2 +-
 arch/arm/cpu/armv7/Makefile                |  2 +-
 arch/arm/cpu/armv8/Makefile                |  6 +-
 arch/arm/cpu/armv8/fsl-layerscape/Makefile |  2 +-
 arch/arm/lib/Makefile                      | 18 +++---
 arch/arm/mach-at91/arm926ejs/Makefile      |  4 +-
 arch/arm/mach-omap2/Makefile               |  2 +-
 arch/arm/mach-omap2/am33xx/Makefile        |  2 +-
 arch/arm/mach-orion5x/Makefile             |  4 +-
 arch/arm/mach-rockchip/Makefile            |  2 +-
 arch/arm/mach-stm32mp/Makefile             |  2 +-
 arch/arm/mach-zynqmp/Makefile              |  2 +-
 arch/powerpc/lib/Makefile                  |  2 +-
 arch/riscv/lib/Makefile                    | 16 ++---
 arch/x86/Makefile                          |  8 +--
 arch/x86/cpu/Makefile                      | 20 +++----
 arch/x86/cpu/broadwell/Makefile            | 10 ++--
 arch/x86/cpu/intel_common/Makefile         | 14 ++---
 arch/x86/cpu/ivybridge/Makefile            |  6 +-
 arch/x86/cpu/qemu/Makefile                 |  2 +-
 arch/x86/lib/Makefile                      | 10 ++--
 board/bosch/guardian/Makefile              |  2 +-
 board/compulab/common/Makefile             |  2 +-
 board/freescale/common/Makefile            |  4 +-
 board/tcl/sl50/Makefile                    |  2 +-
 board/ti/am335x/Makefile                   |  2 +-
 board/ti/am43xx/Makefile                   |  2 +-
 board/vscom/baltos/Makefile                |  2 +-
 board/xilinx/zynqmp/Makefile               |  2 +-
 boot/Makefile                              | 52 ++++++++--------
 cmd/Makefile                               |  2 +-
 common/Makefile                            | 26 ++++----
 common/init/Makefile                       |  2 +-
 common/spl/Makefile                        | 48 +++++++--------
 disk/Makefile                              | 18 +++---
 doc/develop/tests_writing.rst              |  6 +-
 drivers/Makefile                           | 70 +++++++++++-----------
 drivers/ata/Makefile                       |  2 +-
 drivers/block/Makefile                     |  6 +-
 drivers/bus/Makefile                       |  2 +-
 drivers/cache/Makefile                     |  2 +-
 drivers/clk/Makefile                       | 14 ++---
 drivers/clk/imx/Makefile                   | 18 +++---
 drivers/clk/ti/Makefile                    |  4 +-
 drivers/core/Makefile                      | 14 ++---
 drivers/ddr/altera/Makefile                |  2 +-
 drivers/dfu/Makefile                       | 14 ++---
 drivers/firmware/Makefile                  |  2 +-
 drivers/gpio/Makefile                      | 10 ++--
 drivers/i2c/Makefile                       | 14 ++---
 drivers/input/Makefile                     |  6 +-
 drivers/led/Makefile                       |  2 +-
 drivers/mailbox/Makefile                   |  2 +-
 drivers/misc/Makefile                      | 22 +++----
 drivers/mmc/Makefile                       | 10 ++--
 drivers/mtd/Makefile                       |  4 +-
 drivers/mtd/nand/Makefile                  |  2 +-
 drivers/mtd/nand/raw/Makefile              |  2 +-
 drivers/mtd/spi/Makefile                   |  8 +--
 drivers/mux/Makefile                       |  2 +-
 drivers/phy/Makefile                       |  6 +-
 drivers/phy/ti/Makefile                    |  2 +-
 drivers/pinctrl/Makefile                   |  6 +-
 drivers/power/Makefile                     |  8 +--
 drivers/power/acpi_pmc/Makefile            |  2 +-
 drivers/power/domain/Makefile              |  2 +-
 drivers/power/pmic/Makefile                | 30 +++++-----
 drivers/power/regulator/Makefile           | 38 ++++++------
 drivers/ram/Makefile                       |  2 +-
 drivers/remoteproc/Makefile                |  2 +-
 drivers/rtc/Makefile                       |  6 +-
 drivers/scsi/Makefile                      |  2 +-
 drivers/serial/Makefile                    |  4 +-
 drivers/spi/Makefile                       |  2 +-
 drivers/sysreset/Makefile                  |  6 +-
 drivers/timer/Makefile                     |  6 +-
 drivers/tpm/Makefile                       |  4 +-
 drivers/usb/cdns3/Makefile                 |  4 +-
 drivers/usb/common/Makefile                |  2 +-
 drivers/usb/dwc3/Makefile                  |  2 +-
 drivers/usb/gadget/udc/Makefile            |  6 +-
 drivers/usb/host/Makefile                  |  6 +-
 drivers/watchdog/Makefile                  |  2 +-
 env/Makefile                               | 22 +++----
 fs/fat/Makefile                            |  4 +-
 fs/sandbox/Makefile                        |  2 +-
 fs/squashfs/Makefile                       |  2 +-
 lib/Makefile                               | 52 ++++++++--------
 lib/acpi/Makefile                          |  8 +--
 lib/aes/Makefile                           |  2 +-
 lib/crypto/Makefile                        | 14 ++---
 lib/ecdsa/Makefile                         |  2 +-
 lib/libfdt/Makefile                        |  2 +-
 lib/rsa/Makefile                           |  4 +-
 net/Makefile                               |  8 +--
 scripts/Kbuild.include                     |  5 --
 scripts/Makefile.dts                       |  2 +-
 scripts/Makefile.spl                       | 41 ++++++-------
 test/Makefile                              | 20 +++----
 test/dm/Makefile                           |  2 +-
 test/fuzz/Makefile                         |  2 +-
 104 files changed, 445 insertions(+), 455 deletions(-)

diff --git a/Makefile b/Makefile
index aee9d41e7da..ed51b3efa83 100644
--- a/Makefile
+++ b/Makefile
@@ -830,7 +830,7 @@ KBUILD_HOSTCFLAGS += $(if $(CONFIG_TOOLS_DEBUG),-g)
 UBOOTINCLUDE    := \
 	-Iinclude \
 	$(if $(KBUILD_SRC), -I$(srctree)/include) \
-	$(if $(CONFIG_$(SPL_)SYS_THUMB_BUILD), \
+	$(if $(CONFIG_SYS_THUMB_BUILD), \
 		$(if $(CONFIG_HAS_THUMB2), \
 			$(if $(CONFIG_CPU_V7M), \
 				-I$(srctree)/arch/arm/thumb1/include), \
@@ -864,7 +864,7 @@ libs-y += disk/
 libs-y += drivers/
 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 libs-$(CONFIG_SYS_FSL_MMDC) += drivers/ddr/fsl/
-libs-$(CONFIG_$(SPL_)ALTERA_SDRAM) += drivers/ddr/altera/
+libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
 libs-y += drivers/usb/cdns3/
 libs-y += drivers/usb/dwc3/
 libs-y += drivers/usb/common/
@@ -883,7 +883,7 @@ libs-y += drivers/usb/ulpi/
 ifdef CONFIG_POST
 libs-y += post/
 endif
-libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
+libs-$(CONFIG_UNIT_TEST) += test/
 libs-$(CONFIG_UT_ENV) += test/env/
 libs-$(CONFIG_UT_OPTEE) += test/optee/
 libs-$(CONFIG_UT_OVERLAY) += test/overlay/
diff --git a/arch/arm/config.mk b/arch/arm/config.mk
index bf781f10262..4e2e1cd729f 100644
--- a/arch/arm/config.mk
+++ b/arch/arm/config.mk
@@ -34,7 +34,7 @@ PLATFORM_ELFFLAGS += -B arm -O elf32-littlearm
 endif
 
 # Choose between ARM/Thumb instruction sets
-ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
+ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
 AFLAGS_IMPLICIT_IT	:= $(call as-option,-Wa$(comma)-mimplicit-it=always)
 PF_CPPFLAGS_ARM		:= $(AFLAGS_IMPLICIT_IT) \
 			$(call cc-option, -mthumb -mthumb-interwork,\
@@ -47,7 +47,7 @@ PF_CPPFLAGS_ARM := $(call cc-option,-marm,) \
 endif
 
 # Only test once
-ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
+ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
 archprepare: checkthumb checkgcc6
 
 checkthumb:
@@ -110,7 +110,7 @@ LDFLAGS_u-boot += -pie
 #
 # http://sourceware.org/bugzilla/show_bug.cgi?id=12532
 #
-ifeq ($(CONFIG_$(SPL_)SYS_THUMB_BUILD),y)
+ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
 ifeq ($(GAS_BUG_12532),)
 export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
 	then echo y; else echo n; fi)
diff --git a/arch/arm/cpu/arm920t/Makefile b/arch/arm/cpu/arm920t/Makefile
index 5ac3740621c..0b249fe8ce0 100644
--- a/arch/arm/cpu/arm920t/Makefile
+++ b/arch/arm/cpu/arm920t/Makefile
@@ -9,6 +9,6 @@ obj-y	+= cpu.o
 
 # some files can only build in ARM mode
 
-ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifdef CONFIG_SYS_THUMB_BUILD
 CFLAGS_cpu.o := -marm
 endif
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index 7e7ad4f35d7..66203e5dbef 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_ARCH_SUNXI) += sunxi/
 
 # some files can only build in ARM or THUMB2, not THUMB1
 
-ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifdef CONFIG_SYS_THUMB_BUILD
 ifndef CONFIG_HAS_THUMB2
 
 CFLAGS_cpu.o := -marm
diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
index 653eef8ad79..e16c306b89b 100644
--- a/arch/arm/cpu/armv7/Makefile
+++ b/arch/arm/cpu/armv7/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_EFI_LOADER) += sctlr.o
 obj-$(CONFIG_ARMV7_NONSEC) += exception_level.o
 endif
 
-ifneq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),y)
+ifneq ($(CONFIG_SKIP_LOWLEVEL_INIT),y)
 obj-y	+= lowlevel_init.o
 endif
 
diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile
index bba4f570dbb..4fa54c91d4c 100644
--- a/arch/arm/cpu/armv8/Makefile
+++ b/arch/arm/cpu/armv8/Makefile
@@ -6,10 +6,10 @@
 extra-y	:= start.o
 
 obj-y	+= cpu.o
-ifndef CONFIG_$(SPL_TPL_)TIMER
+ifndef CONFIG_TIMER
 obj-$(CONFIG_SYS_ARCH_TIMER) += generic_timer.o
 endif
-ifndef CONFIG_$(SPL_)SYS_DCACHE_OFF
+ifndef CONFIG_SYS_DCACHE_OFF
 obj-y	+= cache_v8.o
 obj-y	+= cache.o
 endif
@@ -32,7 +32,7 @@ obj-$(CONFIG_ARMV8_SPIN_TABLE) += spin_table.o spin_table_v8.o
 else
 obj-$(CONFIG_ARCH_SUNXI) += fel_utils.o
 endif
-obj-$(CONFIG_$(SPL_)ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
+obj-$(CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT) += sec_firmware.o sec_firmware_asm.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_RECOVER_DATA_SECTION) += spl_data.o
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/Makefile b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
index 598c36ee660..7a480b9764c 100644
--- a/arch/arm/cpu/armv8/fsl-layerscape/Makefile
+++ b/arch/arm/cpu/armv8/fsl-layerscape/Makefile
@@ -10,7 +10,7 @@ obj-$(CONFIG_MP) += mp.o spintable.o
 obj-$(CONFIG_OF_LIBFDT) += fdt.o
 endif
 obj-$(CONFIG_SPL) += spl.o
-obj-$(CONFIG_$(SPL_)FSL_LS_PPA) += ppa.o
+obj-$(CONFIG_FSL_LS_PPA) += ppa.o
 
 ifneq ($(CONFIG_FSL_LSCH3),)
 obj-y += fsl_lsch3_speed.o
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 62cf80f3739..f43b82d3b46 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
 obj-$(CONFIG_CMD_BOOTZ) += bootm.o zimage.o
 else
-obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
+obj-$(CONFIG_FRAMEWORK) += spl.o
 ifdef CONFIG_SPL_FRAMEWORK
 obj-$(CONFIG_CMD_BOOTI) += image.o
 obj-$(CONFIG_CMD_BOOTZ) += zimage.o
@@ -42,14 +42,14 @@ endif
 obj-$(CONFIG_OF_LIBFDT) += bootm-fdt.o
 endif
 ifdef CONFIG_ARM64
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset-arm64.o
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy-arm64.o
+obj-$(CONFIG_USE_ARCH_MEMSET) += memset-arm64.o
+obj-$(CONFIG_USE_ARCH_MEMCPY) += memcpy-arm64.o
 else
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
+obj-$(CONFIG_USE_ARCH_MEMSET) += memset.o
+obj-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
 endif
-obj-$(CONFIG_$(SPL_TPL_)SYS_L2_PL310) += cache-pl310.o
-obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o
+obj-$(CONFIG_SYS_L2_PL310) += cache-pl310.o
+obj-$(CONFIG_SEMIHOSTING) += semihosting.o
 
 ifneq ($(filter y,$(CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR) $(CONFIG_SAVE_PREV_BL_FDT_ADDR)),)
 obj-y += save_prev_bl_data.o
@@ -73,7 +73,7 @@ obj-y	+= interrupts_64.o
 else
 obj-y	+= interrupts.o
 endif
-ifndef CONFIG_$(SPL_TPL_)SYSRESET
+ifndef CONFIG_SYSRESET
 obj-y	+= reset.o
 endif
 
@@ -92,7 +92,7 @@ endif
 
 # some files can only build in ARM or THUMB2, not THUMB1
 
-ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifdef CONFIG_SYS_THUMB_BUILD
 asflags-$(CONFIG_HAS_THUMB2) += -DCONFIG_THUMB2_KERNEL
 ifndef CONFIG_HAS_THUMB2
 
diff --git a/arch/arm/mach-at91/arm926ejs/Makefile b/arch/arm/mach-at91/arm926ejs/Makefile
index 902dd3a60e3..4ada807f914 100644
--- a/arch/arm/mach-at91/arm926ejs/Makefile
+++ b/arch/arm/mach-at91/arm926ejs/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_SAM9X60)		+= sam9x60_devices.o
 obj-$(CONFIG_AT91_EFLASH)	+= eflash.o
 obj-y += clock.o
 obj-y += cpu.o
-ifndef CONFIG_$(SPL_TPL_)SYSRESET
+ifndef CONFIG_SYSRESET
 obj-y	+= reset.o
 endif
 ifneq ($(CONFIG_ATMEL_PIT_TIMER),y)
@@ -34,7 +34,7 @@ obj-y	+= lowlevel_init.o
 endif
 endif
 
-ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifdef CONFIG_SYS_THUMB_BUILD
 ifndef CONFIG_HAS_THUMB2
 
 CFLAGS_cache.o := -marm
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index bb01eab80e6..0777a0c9981 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_SCSI_AHCI_PLAT) += sata.o
 endif
 endif
 
-ifeq ($(CONFIG_$(SPL_TPL_)SYS_DCACHE_OFF),)
+ifeq ($(CONFIG_SYS_DCACHE_OFF),)
 obj-y	+= omap-cache.o
 endif
 
diff --git a/arch/arm/mach-omap2/am33xx/Makefile b/arch/arm/mach-omap2/am33xx/Makefile
index bf94d345dae..388573d2cd6 100644
--- a/arch/arm/mach-omap2/am33xx/Makefile
+++ b/arch/arm/mach-omap2/am33xx/Makefile
@@ -12,7 +12,7 @@ endif
 obj-$(CONFIG_TI816X)	+= clock_ti816x.o
 obj-y	+= sys_info.o
 obj-y	+= ddr.o
-ifeq ($(CONFIG_TI816X)$(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_TI816X)$(CONFIG_SKIP_LOWLEVEL_INIT),)
 obj-y	+= emif4.o
 endif
 obj-$(CONFIG_TI816X)	+= ti816x_emif4.o
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
index a8b87f6d710..ee96d5ece99 100644
--- a/arch/arm/mach-orion5x/Makefile
+++ b/arch/arm/mach-orion5x/Makefile
@@ -11,13 +11,13 @@ obj-y	= cpu.o
 obj-y	+= dram.o
 obj-y	+= timer.o
 
-ifndef CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT
+ifndef CONFIG_SKIP_LOWLEVEL_INIT
 obj-y	+= lowlevel_init.o
 endif
 
 # some files can only build in ARM or THUMB2, not THUMB1
 
-ifdef CONFIG_$(SPL_)SYS_THUMB_BUILD
+ifdef CONFIG_SYS_THUMB_BUILD
 ifndef CONFIG_HAS_THUMB2
 
 CFLAGS_cpu.o := -marm
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index e3d4a8b42e4..edf2fd46820 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -30,7 +30,7 @@ ifeq ($(CONFIG_TPL_BUILD),)
 obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
+obj-$(CONFIG_RAM) += sdram.o
 
 obj-$(CONFIG_ROCKCHIP_PX30) += px30/
 obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
diff --git a/arch/arm/mach-stm32mp/Makefile b/arch/arm/mach-stm32mp/Makefile
index a19b2797c8b..a0b16fc5278 100644
--- a/arch/arm/mach-stm32mp/Makefile
+++ b/arch/arm/mach-stm32mp/Makefile
@@ -22,5 +22,5 @@ obj-$(CONFIG_ARMV7_PSCI) += psci.o
 obj-$(CONFIG_TFABOOT) += boot_params.o
 endif
 
-obj-$(CONFIG_$(SPL_)STM32MP15_PWR) += pwr_regulator.o
+obj-$(CONFIG_STM32MP15_PWR) += pwr_regulator.o
 obj-$(CONFIG_OF_SYSTEM_SETUP) += fdt.o
diff --git a/arch/arm/mach-zynqmp/Makefile b/arch/arm/mach-zynqmp/Makefile
index bb1830c8462..4f9f6b56a98 100644
--- a/arch/arm/mach-zynqmp/Makefile
+++ b/arch/arm/mach-zynqmp/Makefile
@@ -8,4 +8,4 @@ obj-y	+= cpu.o
 obj-$(CONFIG_MP)	+= mp.o
 obj-$(CONFIG_SPL_BUILD) += spl.o handoff.o psu_spl_init.o
 obj-$(CONFIG_SPL_ZYNQMP_DRAM_ECC_INIT) += ecc_spl_init.o
-obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED)	+= psu_spl_init.o
+obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED)	+= psu_spl_init.o
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index bb819dcbb6c..7b84db928e3 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -45,5 +45,5 @@ obj-y	+= traps.o
 endif # not minimal
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_$(SPL_TPL)_FRAMEWORK) += spl.o
+obj-$(CONFIG_FRAMEWORK) += spl.o
 endif
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index e5a81ba7223..f902a4c2fed 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -11,19 +11,19 @@ obj-$(CONFIG_CMD_BOOTI) += bootm.o image.o
 obj-$(CONFIG_CMD_GO) += boot.o
 obj-y	+= cache.o
 obj-$(CONFIG_SIFIVE_CACHE) += sifive_cache.o
-ifeq ($(CONFIG_$(SPL_)RISCV_MMODE),y)
-obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint.o
+ifeq ($(CONFIG_RISCV_MMODE),y)
+obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint.o
 obj-$(CONFIG_ANDES_PLICSW) += andes_plicsw.o
 else
 obj-$(CONFIG_SBI) += sbi.o
 obj-$(CONFIG_SBI_IPI) += sbi_ipi.o
 endif
 obj-y	+= interrupts.o
-ifeq ($(CONFIG_$(SPL_)SYSRESET),)
+ifeq ($(CONFIG_SYSRESET),)
 obj-y	+= reset.o
 endif
 obj-y   += setjmp.o
-obj-$(CONFIG_$(SPL_)SMP) += smp.o
+obj-$(CONFIG_SMP) += smp.o
 obj-$(CONFIG_SPL_BUILD)	+= spl.o
 obj-y   += fdt_fixup.o
 
@@ -39,8 +39,8 @@ extra-$(CONFIG_CMD_BOOTEFI_HELLO_COMPILE) += $(EFI_CRT0) $(EFI_RELOC)
 extra-$(CONFIG_CMD_BOOTEFI_SELFTEST) += $(EFI_CRT0) $(EFI_RELOC)
 extra-$(CONFIG_EFI) += $(EFI_CRT0) $(EFI_RELOC)
 
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMSET) += memset.o
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMMOVE) += memmove.o
-obj-$(CONFIG_$(SPL_TPL_)USE_ARCH_MEMCPY) += memcpy.o
+obj-$(CONFIG_USE_ARCH_MEMSET) += memset.o
+obj-$(CONFIG_USE_ARCH_MEMMOVE) += memmove.o
+obj-$(CONFIG_USE_ARCH_MEMCPY) += memcpy.o
 
-obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o
+obj-$(CONFIG_SEMIHOSTING) += semihosting.o
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index f1afc74fff8..8bb6c4de156 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 ifeq ($(CONFIG_EFI_APP),)
-ifdef CONFIG_$(SPL_)X86_64
+ifdef CONFIG_X86_64
 head-y := arch/x86/cpu/start64.o
 else
-ifeq ($(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),y)
+ifeq ($(CONFIG_X86_16BIT_INIT),y)
 head-y := arch/x86/cpu/start.o
 else
 ifndef CONFIG_SPL
@@ -20,8 +20,8 @@ endif
 endif
 endif # EFI
 
-head-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += arch/x86/cpu/start16.o
-head-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += arch/x86/cpu/resetvec.o
+head-$(CONFIG_X86_16BIT_INIT) += arch/x86/cpu/start16.o
+head-$(CONFIG_X86_16BIT_INIT) += arch/x86/cpu/resetvec.o
 
 libs-y += arch/x86/cpu/
 libs-y += arch/x86/lib/
diff --git a/arch/x86/cpu/Makefile b/arch/x86/cpu/Makefile
index 6f36281c970..5f41f3eb3d4 100644
--- a/arch/x86/cpu/Makefile
+++ b/arch/x86/cpu/Makefile
@@ -6,10 +6,10 @@
 # (C) Copyright 2002
 # Daniel Engström, Omicron Ceti AB, daniel at omicron.se.
 
-ifeq ($(CONFIG_$(SPL_)X86_64),y)
+ifeq ($(CONFIG_X86_64),y)
 extra-y	= start64.o
 else
-ifeq ($(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),y)
+ifeq ($(CONFIG_X86_16BIT_INIT),y)
 extra-y	= start.o
 else
 ifndef CONFIG_SPL
@@ -24,14 +24,14 @@ endif
 endif
 endif
 
-extra-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += resetvec.o start16.o
+extra-$(CONFIG_X86_16BIT_INIT) += resetvec.o start16.o
 
 obj-y	+= cpu.o
 ifndef CONFIG_TPL_BUILD
 obj-y	+= cpu_x86.o
 endif
 
-ifndef CONFIG_$(SPL_)X86_64
+ifndef CONFIG_X86_64
 AFLAGS_REMOVE_call32.o := -mregparm=3 \
 	$(if $(CONFIG_EFI_STUB_64BIT),-march=i386 -m32)
 AFLAGS_call32.o := -fpic -fshort-wchar \
@@ -54,23 +54,23 @@ obj-$(CONFIG_INTEL_QUARK) += quark/
 obj-$(CONFIG_INTEL_QUEENSBAY) += queensbay/
 obj-$(CONFIG_INTEL_TANGIER) += tangier/
 obj-$(CONFIG_APIC) += lapic.o ioapic.o
-obj-$(CONFIG_$(SPL_TPL_)ACPI_GPE) += acpi_gpe.o
+obj-$(CONFIG_ACPI_GPE) += acpi_gpe.o
 obj-$(CONFIG_QFW) += qfw_cpu.o
 ifndef CONFIG_SYS_COREBOOT
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += irq.o
+obj-$(CONFIG_X86_32BIT_INIT) += irq.o
 endif
-ifndef CONFIG_$(SPL_)X86_64
-obj-$(CONFIG_$(SPL_)SMP) += mp_init.o
+ifndef CONFIG_X86_64
+obj-$(CONFIG_SMP) += mp_init.o
 endif
 obj-y += mtrr.o
 obj-$(CONFIG_PPL_PCI) += pci.o
-ifndef CONFIG_$(SPL_)X86_64
+ifndef CONFIG_X86_64
 obj-$(CONFIG_SMP) += sipi_vector.o
 endif
 obj-y += turbo.o
 obj-$(CONFIG_HAVE_ACPI_RESUME) += wakeup.o
 
-ifeq ($(CONFIG_$(SPL_)X86_64),y)
+ifeq ($(CONFIG_X86_64),y)
 obj-y += x86_64/
 else
 obj-y += i386/
diff --git a/arch/x86/cpu/broadwell/Makefile b/arch/x86/cpu/broadwell/Makefile
index 52d56c65be8..9d63e3ff24d 100644
--- a/arch/x86/cpu/broadwell/Makefile
+++ b/arch/x86/cpu/broadwell/Makefile
@@ -3,8 +3,8 @@
 # Copyright (c) 2016 Google, Inc
 
 obj-y += adsp.o
-obj-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += cpu.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += cpu_full.o
+obj-$(CONFIG_X86_16BIT_INIT) += cpu.o
+obj-$(CONFIG_X86_32BIT_INIT) += cpu_full.o
 
 ifdef CONFIG_SPL
 ifndef CONFIG_SPL_BUILD
@@ -17,7 +17,7 @@ ifndef CONFIG_SPL_BUILD
 endif
 endif
 
-ifeq ($(CONFIG_$(SPL_TPL_)X86_32BIT_INIT),)
+ifeq ($(CONFIG_X86_32BIT_INIT),)
 #obj-y += cpu_from_spl.o
 endif
 
@@ -28,6 +28,6 @@ obj-y += northbridge.o
 obj-y += pch.o
 obj-y += pinctrl_broadwell.o
 obj-y += power_state.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += refcode.o
+obj-$(CONFIG_X86_32BIT_INIT) += refcode.o
 obj-y += sata.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += sdram.o
+obj-$(CONFIG_X86_32BIT_INIT) += sdram.o
diff --git a/arch/x86/cpu/intel_common/Makefile b/arch/x86/cpu/intel_common/Makefile
index 1dc17b45879..caab887b8e6 100644
--- a/arch/x86/cpu/intel_common/Makefile
+++ b/arch/x86/cpu/intel_common/Makefile
@@ -5,10 +5,10 @@
 obj-$(CONFIG_INTEL_ACPIGEN) += acpi.o
 
 ifdef CONFIG_HAVE_MRC
-obj-$(CONFIG_$(SPL_TPL_)X86_16BIT_INIT) += car.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += me_status.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += report_platform.o
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += mrc.o
+obj-$(CONFIG_X86_16BIT_INIT) += car.o
+obj-$(CONFIG_X86_32BIT_INIT) += me_status.o
+obj-$(CONFIG_X86_32BIT_INIT) += report_platform.o
+obj-$(CONFIG_X86_32BIT_INIT) += mrc.o
 endif
 
 ifndef CONFIG_SPL_BUILD
@@ -26,10 +26,10 @@ obj-y += cpu.o
 obj-y += fast_spi.o
 obj-y += lpc.o
 obj-y += lpss.o
-obj-$(CONFIG_$(SPL_)INTEL_GENERIC_WIFI) += generic_wifi.o
+obj-$(CONFIG_INTEL_GENERIC_WIFI) += generic_wifi.o
 ifndef CONFIG_EFI_APP
-obj-$(CONFIG_$(SPL_TPL_)X86_32BIT_INIT) += microcode.o
-ifndef CONFIG_$(SPL_)X86_64
+obj-$(CONFIG_X86_32BIT_INIT) += microcode.o
+ifndef CONFIG_X86_64
 obj-y += microcode.o
 endif
 endif
diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile
index 716134e9ff3..01e50492f18 100644
--- a/arch/x86/cpu/ivybridge/Makefile
+++ b/arch/x86/cpu/ivybridge/Makefile
@@ -5,15 +5,15 @@
 ifdef CONFIG_HAVE_FSP
 obj-y += fsp_configs.o ivybridge.o
 else
-obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += cpu.o
+obj-$(CONFIG_X86_32BIT_INIT) += cpu.o
 obj-y += early_me.o
 obj-y += lpc.o
 obj-y += northbridge.o
 ifndef CONFIG_SPL_BUILD
 obj-y += sata.o
 endif
-obj-$(CONFIG_$(SPL_)X86_32BIT_INIT) += sdram.o
-ifndef CONFIG_$(SPL_)X86_32BIT_INIT
+obj-$(CONFIG_X86_32BIT_INIT) += sdram.o
+ifndef CONFIG_X86_32BIT_INIT
 obj-y += sdram_nop.o
 endif
 endif
diff --git a/arch/x86/cpu/qemu/Makefile b/arch/x86/cpu/qemu/Makefile
index b7dd5bd46c7..a40bea187cf 100644
--- a/arch/x86/cpu/qemu/Makefile
+++ b/arch/x86/cpu/qemu/Makefile
@@ -2,7 +2,7 @@
 #
 # Copyright (C) 2015, Bin Meng <bmeng.cn at gmail.com>
 
-ifndef CONFIG_$(SPL_)X86_64
+ifndef CONFIG_X86_64
 obj-y += car.o
 endif
 obj-y += dram.o
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index ea7ff2bcf38..bd275fadd89 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -4,7 +4,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
 obj-y	+= bdinfo.o
-ifndef CONFIG_$(SPL_TPL_)X86_64
+ifndef CONFIG_X86_64
 ifndef CONFIG_TPL_BUILD
 obj-y += bios.o
 obj-y += bios_asm.o
@@ -16,7 +16,7 @@ ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_CMD_BOOTM) += bootm.o
 endif
 obj-y	+= cmd_boot.o
-obj-$(CONFIG_$(SPL_)COREBOOT_SYSINFO)	+= coreboot/
+obj-$(CONFIG_COREBOOT_SYSINFO)	+= coreboot/
 obj-$(CONFIG_SEABIOS) += coreboot_table.o
 obj-y	+= early_cmos.o
 obj-y	+= e820.o
@@ -24,7 +24,7 @@ obj-y	+= init_helpers.o
 obj-y	+= interrupts.o
 obj-y	+= lpc-uclass.o
 obj-y	+= mpspec.o
-obj-$(CONFIG_$(SPL_TPL_)ACPIGEN) += acpi_nhlt.o
+obj-$(CONFIG_ACPIGEN) += acpi_nhlt.o
 obj-y	+= northbridge-uclass.o
 obj-$(CONFIG_I8259_PIC) += i8259.o
 obj-$(CONFIG_I8254_TIMER) += i8254.o
@@ -41,7 +41,7 @@ obj-y	+= acpi.o
 obj-$(CONFIG_HAVE_ACPI_RESUME) += acpi_s3.o
 ifndef CONFIG_QEMU
 obj-y += acpigen.o
-obj-$(CONFIG_$(SPL_TPL_)GENERATE_ACPI_TABLE) += acpi_table.o
+obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi_table.o
 endif
 obj-y	+= tables.o
 ifndef CONFIG_SPL_BUILD
@@ -87,7 +87,7 @@ endif
 
 ifdef CONFIG_EFI_STUB
 
-ifeq ($(CONFIG_$(SPL_)X86_64),)
+ifeq ($(CONFIG_X86_64),)
 extra-y += $(EFI_CRT0) $(EFI_RELOC)
 endif
 
diff --git a/board/bosch/guardian/Makefile b/board/bosch/guardian/Makefile
index 20cecbfb64e..11625c9dd67 100644
--- a/board/bosch/guardian/Makefile
+++ b/board/bosch/guardian/Makefile
@@ -5,7 +5,7 @@
 # Copyright (C) 2018 Robert Bosch Power Tools GmbH
 #
 
-ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
 obj-y	:= mux.o
 endif
 
diff --git a/board/compulab/common/Makefile b/board/compulab/common/Makefile
index 7c8226e6e16..9479e02d3d0 100644
--- a/board/compulab/common/Makefile
+++ b/board/compulab/common/Makefile
@@ -5,5 +5,5 @@
 # Author: Igor Grinberg <grinberg at compulab.co.il>
 
 obj-y				+= common.o
-obj-$(CONFIG_$(SPL_)SYS_I2C_LEGACY)	+= eeprom.o
+obj-$(CONFIG_SYS_I2C_LEGACY)	+= eeprom.o
 obj-$(CONFIG_SMC911X)		+= omap3_smc911x.o
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index b4faf6f9e0a..718a24dac30 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -34,7 +34,7 @@ obj-$(CONFIG_FSL_NGPIXIS)	+= ngpixis.o
 endif
 obj-$(I2C_COMMON)		+= i2c_common.o
 obj-$(CONFIG_FSL_USE_PCA9547_MUX)		+= i2c_mux.o
-obj-$(CONFIG_$(SPL_)VID)	+= vid.o
+obj-$(CONFIG_VID)	+= vid.o
 obj-$(CONFIG_FSL_QIXIS)	+= qixis.o
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_ID_EEPROM)	+= sys_eeprom.o
@@ -54,7 +54,7 @@ obj-$(CONFIG_TARGET_MPC8548CDS)	+= cds_pci_ft.o
 obj-$(CONFIG_TARGET_P3041DS)		+= ics307_clk.o
 obj-$(CONFIG_TARGET_P4080DS)		+= ics307_clk.o
 obj-$(CONFIG_TARGET_P5040DS)		+= ics307_clk.o
-ifeq ($(CONFIG_$(SPL_)POWER_LEGACY),y)
+ifeq ($(CONFIG_POWER_LEGACY),y)
 obj-$(CONFIG_POWER_PFUZE100)	+= pfuze.o
 endif
 obj-$(CONFIG_DM_PMIC_PFUZE100)	+= pfuze.o
diff --git a/board/tcl/sl50/Makefile b/board/tcl/sl50/Makefile
index 0ac0ba36cdb..c2977d77787 100644
--- a/board/tcl/sl50/Makefile
+++ b/board/tcl/sl50/Makefile
@@ -4,7 +4,7 @@
 #
 # Copyright (C) 2015 Toby Churchill Ltd - http://www.toby-churchill.com/
 
-ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
 obj-y	:= mux.o
 endif
 
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index 3ccf66be5bb..c34b9b1dd8a 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -4,7 +4,7 @@
 #
 # Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 
-ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
 obj-y	:= mux.o
 endif
 
diff --git a/board/ti/am43xx/Makefile b/board/ti/am43xx/Makefile
index 8dc1d89e3ac..60a11d8c04d 100644
--- a/board/ti/am43xx/Makefile
+++ b/board/ti/am43xx/Makefile
@@ -4,7 +4,7 @@
 #
 # Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
 
-ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
 obj-y	:= mux.o
 endif
 
diff --git a/board/vscom/baltos/Makefile b/board/vscom/baltos/Makefile
index 3ccf66be5bb..c34b9b1dd8a 100644
--- a/board/vscom/baltos/Makefile
+++ b/board/vscom/baltos/Makefile
@@ -4,7 +4,7 @@
 #
 # Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 
-ifeq ($(CONFIG_$(SPL_)SKIP_LOWLEVEL_INIT),)
+ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
 obj-y	:= mux.o
 endif
 
diff --git a/board/xilinx/zynqmp/Makefile b/board/xilinx/zynqmp/Makefile
index 732f909fc21..1518219acef 100644
--- a/board/xilinx/zynqmp/Makefile
+++ b/board/xilinx/zynqmp/Makefile
@@ -31,7 +31,7 @@ $(warning Put custom psu_init_gpl.c/h to board/xilinx/zynqmp/custom_hw_platform/
 endif
 endif
 
-obj-$(CONFIG_$(SPL_)ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
+obj-$(CONFIG_ZYNQMP_PSU_INIT_ENABLED) += $(init-objs)
 
 ifdef CONFIG_SPL_BUILD
 ifneq ($(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE),"")
diff --git a/boot/Makefile b/boot/Makefile
index 73b5b19816b..625d143a711 100644
--- a/boot/Makefile
+++ b/boot/Makefile
@@ -18,29 +18,29 @@ obj-y += image.o image-board.o
 obj-$(CONFIG_ANDROID_AB) += android_ab.o
 obj-$(CONFIG_ANDROID_BOOT_IMAGE) += image-android.o image-android-dt.o
 
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootdev-uclass.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootflow.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootmeth-uclass.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootstd-uclass.o
-
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_DISTRO) += bootmeth_distro.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_DISTRO_PXE) += bootmeth_pxe.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_EFILOADER) += bootmeth_efi.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SANDBOX) += bootmeth_sandbox.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_SCRIPT) += bootmeth_script.o
-ifdef CONFIG_$(SPL_TPL_)BOOTSTD_FULL
+obj-$(CONFIG_BOOTSTD) += bootdev-uclass.o
+obj-$(CONFIG_BOOTSTD) += bootflow.o
+obj-$(CONFIG_BOOTSTD) += bootmeth-uclass.o
+obj-$(CONFIG_BOOTSTD) += bootstd-uclass.o
+
+obj-$(CONFIG_BOOTMETH_DISTRO) += bootmeth_distro.o
+obj-$(CONFIG_BOOTMETH_DISTRO_PXE) += bootmeth_pxe.o
+obj-$(CONFIG_BOOTMETH_EFILOADER) += bootmeth_efi.o
+obj-$(CONFIG_BOOTMETH_SANDBOX) += bootmeth_sandbox.o
+obj-$(CONFIG_BOOTMETH_SCRIPT) += bootmeth_script.o
+ifdef CONFIG_BOOTSTD_FULL
 obj-$(CONFIG_CMD_BOOTEFI_BOOTMGR) += bootmeth_efi_mgr.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += bootflow_menu.o
+obj-$(CONFIG_BOOTSTD) += bootflow_menu.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += image-fdt.o
-obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += fdt_region.o
-obj-$(CONFIG_$(SPL_TPL_)FIT) += image-fit.o
-obj-$(CONFIG_$(SPL_)MULTI_DTB_FIT) += boot_fit.o common_fit.o
-obj-$(CONFIG_$(SPL_TPL_)IMAGE_PRE_LOAD) += image-pre-load.o
-obj-$(CONFIG_$(SPL_TPL_)IMAGE_SIGN_INFO) += image-sig.o
-obj-$(CONFIG_$(SPL_TPL_)FIT_SIGNATURE) += image-fit-sig.o
-obj-$(CONFIG_$(SPL_TPL_)FIT_CIPHER) += image-cipher.o
+obj-$(CONFIG_OF_LIBFDT) += image-fdt.o
+obj-$(CONFIG_FIT_SIGNATURE) += fdt_region.o
+obj-$(CONFIG_FIT) += image-fit.o
+obj-$(CONFIG_MULTI_DTB_FIT) += boot_fit.o common_fit.o
+obj-$(CONFIG_IMAGE_PRE_LOAD) += image-pre-load.o
+obj-$(CONFIG_IMAGE_SIGN_INFO) += image-sig.o
+obj-$(CONFIG_FIT_SIGNATURE) += image-fit-sig.o
+obj-$(CONFIG_FIT_CIPHER) += image-cipher.o
 
 obj-$(CONFIG_CMD_ADTIMG) += image-android-dt.o
 
@@ -48,10 +48,10 @@ ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_LOAD_FIT) += common_fit.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE) += expo.o scene.o scene_menu.o
+obj-$(CONFIG_BOOTMETH_VBE) += expo.o scene.o scene_menu.o
 
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE) += vbe.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_REQUEST) += vbe_request.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE) += vbe_simple.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE_FW) += vbe_simple_fw.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTMETH_VBE_SIMPLE_OS) += vbe_simple_os.o
+obj-$(CONFIG_BOOTMETH_VBE) += vbe.o
+obj-$(CONFIG_BOOTMETH_VBE_REQUEST) += vbe_request.o
+obj-$(CONFIG_BOOTMETH_VBE_SIMPLE) += vbe_simple.o
+obj-$(CONFIG_BOOTMETH_VBE_SIMPLE_FW) += vbe_simple_fw.o
+obj-$(CONFIG_BOOTMETH_VBE_SIMPLE_OS) += vbe_simple_os.o
diff --git a/cmd/Makefile b/cmd/Makefile
index b6888a52f49..cee56a16f18 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -227,7 +227,7 @@ obj-$(CONFIG_X86) += x86/
 obj-$(CONFIG_ARCH_MVEBU) += mvebu/
 endif # !CONFIG_SPL_BUILD
 
-obj-$(CONFIG_$(SPL_)CMD_TLV_EEPROM) += tlv_eeprom.o
+obj-$(CONFIG_CMD_TLV_EEPROM) += tlv_eeprom.o
 
 # core command
 obj-y += nvedit.o
diff --git a/common/Makefile b/common/Makefile
index 252e9656dfd..56d734892ef 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o
 obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o
 
 obj-$(CONFIG_FDT_SIMPLEFB) += fdt_simplefb.o
-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
+obj-$(CONFIG_OF_LIBFDT) += fdt_support.o
 obj-$(CONFIG_MII) += miiphyutil.o
 obj-$(CONFIG_CMD_MII) += miiphyutil.o
 obj-$(CONFIG_PHYLIB) += miiphyutil.o
@@ -43,15 +43,15 @@ obj-$(CONFIG_CMDLINE) += cli_getch.o cli_readline.o cli_simple.o
 
 endif # !CONFIG_SPL_BUILD
 
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTAGE) += bootstage.o
-obj-$(CONFIG_$(SPL_TPL_)BLOBLIST) += bloblist.o
+obj-$(CONFIG_BOOTSTAGE) += bootstage.o
+obj-$(CONFIG_BLOBLIST) += bloblist.o
 
 ifdef CONFIG_SPL_BUILD
 ifdef CONFIG_SPL_DFU
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 endif
 obj-$(CONFIG_SPL_NET) += miiphyutil.o
-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdt_support.o
+obj-$(CONFIG_OF_LIBFDT) += fdt_support.o
 
 obj-$(CONFIG_SPL_USB_HOST) += usb.o usb_hub.o
 obj-$(CONFIG_SPL_USB_STORAGE) += usb_storage.o
@@ -76,15 +76,15 @@ endif # CONFIG_SPL_BUILD
 obj-$(CONFIG_CROS_EC) += cros_ec.o
 obj-y += dlmalloc.o
 ifdef CONFIG_SYS_MALLOC_F
-ifneq ($(CONFIG_$(SPL_TPL_)SYS_MALLOC_F_LEN),0)
+ifneq ($(CONFIG_SYS_MALLOC_F_LEN),0)
 obj-y += malloc_simple.o
 endif
 endif
 
 obj-$(CONFIG_CYCLIC) += cyclic.o
-obj-$(CONFIG_$(SPL_TPL_)EVENT) += event.o
+obj-$(CONFIG_EVENT) += event.o
 
-obj-$(CONFIG_$(SPL_TPL_)HASH) += hash.o
+obj-$(CONFIG_HASH) += hash.o
 obj-$(CONFIG_IO_TRACE) += iotrace.o
 obj-y += memsize.o
 obj-y += stdio.o
@@ -98,15 +98,15 @@ obj-$(CONFIG_FSL_DDR_INTERACTIVE) += cli_getch.o cli_simple.o cli_readline.o
 obj-$(CONFIG_STM32MP1_DDR_INTERACTIVE) += cli_getch.o cli_simple.o cli_readline.o
 obj-$(CONFIG_DFU_OVER_USB) += dfu.o
 obj-y += command.o
-obj-$(CONFIG_$(SPL_TPL_)LOG) += log.o
-obj-$(CONFIG_$(SPL_TPL_)LOG_CONSOLE) += log_console.o
-obj-$(CONFIG_$(SPL_TPL_)LOG_SYSLOG) += log_syslog.o
+obj-$(CONFIG_LOG) += log.o
+obj-$(CONFIG_LOG_CONSOLE) += log_console.o
+obj-$(CONFIG_LOG_SYSLOG) += log_syslog.o
 obj-y += s_record.o
 obj-$(CONFIG_CMD_LOADB) += xyzModem.o
-obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += xyzModem.o
+obj-$(CONFIG_YMODEM_SUPPORT) += xyzModem.o
 
-obj-$(CONFIG_$(SPL_TPL_)AVB_VERIFY) += avb_verify.o
-obj-$(CONFIG_$(SPL_TPL_)STACKPROTECTOR) += stackprot.o
+obj-$(CONFIG_AVB_VERIFY) += avb_verify.o
+obj-$(CONFIG_STACKPROTECTOR) += stackprot.o
 obj-$(CONFIG_SCP03) += scp03.o
 
 obj-$(CONFIG_QFW) += qfw.o
diff --git a/common/init/Makefile b/common/init/Makefile
index 853b56d1e57..c505a64bd7d 100644
--- a/common/init/Makefile
+++ b/common/init/Makefile
@@ -5,4 +5,4 @@
 #
 
 obj-y += board_init.o
-obj-$(CONFIG_$(SPL_TPL_)HANDOFF) += handoff.o
+obj-$(CONFIG_HANDOFF) += handoff.o
diff --git a/common/spl/Makefile b/common/spl/Makefile
index 13db3df9933..0f1d7d6d28f 100644
--- a/common/spl/Makefile
+++ b/common/spl/Makefile
@@ -7,30 +7,30 @@
 #
 
 ifdef CONFIG_SPL_BUILD
-obj-$(CONFIG_$(SPL_TPL_)FRAMEWORK) += spl.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTROM_SUPPORT) += spl_bootrom.o
-obj-$(CONFIG_$(SPL_TPL_)LOAD_FIT) += spl_fit.o
-obj-$(CONFIG_$(SPL_TPL_)LEGACY_IMAGE_FORMAT) += spl_legacy.o
-obj-$(CONFIG_$(SPL_TPL_)NOR_SUPPORT) += spl_nor.o
-obj-$(CONFIG_$(SPL_TPL_)XIP_SUPPORT) += spl_xip.o
-obj-$(CONFIG_$(SPL_TPL_)YMODEM_SUPPORT) += spl_ymodem.o
+obj-$(CONFIG_FRAMEWORK) += spl.o
+obj-$(CONFIG_BOOTROM_SUPPORT) += spl_bootrom.o
+obj-$(CONFIG_LOAD_FIT) += spl_fit.o
+obj-$(CONFIG_LEGACY_IMAGE_FORMAT) += spl_legacy.o
+obj-$(CONFIG_NOR_SUPPORT) += spl_nor.o
+obj-$(CONFIG_XIP_SUPPORT) += spl_xip.o
+obj-$(CONFIG_YMODEM_SUPPORT) += spl_ymodem.o
 ifndef CONFIG_SPL_UBI
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += spl_nand.o
-obj-$(CONFIG_$(SPL_TPL_)ONENAND_SUPPORT) += spl_onenand.o
+obj-$(CONFIG_NAND_SUPPORT) += spl_nand.o
+obj-$(CONFIG_ONENAND_SUPPORT) += spl_onenand.o
 endif
-obj-$(CONFIG_$(SPL_TPL_)UBI) += spl_ubi.o
-obj-$(CONFIG_$(SPL_TPL_)NET) += spl_net.o
-obj-$(CONFIG_$(SPL_TPL_)MMC) += spl_mmc.o
-obj-$(CONFIG_$(SPL_TPL_)ATF) += spl_atf.o
-obj-$(CONFIG_$(SPL_TPL_)OPTEE_IMAGE) += spl_optee.o
-obj-$(CONFIG_$(SPL_TPL_)OPENSBI) += spl_opensbi.o
-obj-$(CONFIG_$(SPL_TPL_)USB_STORAGE) += spl_usb.o
-obj-$(CONFIG_$(SPL_TPL_)FS_FAT) += spl_fat.o
-obj-$(CONFIG_$(SPL_TPL_)FS_EXT4) += spl_ext.o
-obj-$(CONFIG_$(SPL_TPL_)SATA) += spl_sata.o
-obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += spl_semihosting.o
-obj-$(CONFIG_$(SPL_TPL_)DFU) += spl_dfu.o
-obj-$(CONFIG_$(SPL_TPL_)SPI_LOAD) += spl_spi.o
-obj-$(CONFIG_$(SPL_TPL_)RAM_SUPPORT) += spl_ram.o
-obj-$(CONFIG_$(SPL_TPL_)USB_SDP_SUPPORT) += spl_sdp.o
+obj-$(CONFIG_UBI) += spl_ubi.o
+obj-$(CONFIG_NET) += spl_net.o
+obj-$(CONFIG_MMC) += spl_mmc.o
+obj-$(CONFIG_ATF) += spl_atf.o
+obj-$(CONFIG_OPTEE_IMAGE) += spl_optee.o
+obj-$(CONFIG_OPENSBI) += spl_opensbi.o
+obj-$(CONFIG_USB_STORAGE) += spl_usb.o
+obj-$(CONFIG_FS_FAT) += spl_fat.o
+obj-$(CONFIG_FS_EXT4) += spl_ext.o
+obj-$(CONFIG_SATA) += spl_sata.o
+obj-$(CONFIG_SEMIHOSTING) += spl_semihosting.o
+obj-$(CONFIG_DFU) += spl_dfu.o
+obj-$(CONFIG_SPI_LOAD) += spl_spi.o
+obj-$(CONFIG_RAM_SUPPORT) += spl_ram.o
+obj-$(CONFIG_USB_SDP_SUPPORT) += spl_sdp.o
 endif
diff --git a/disk/Makefile b/disk/Makefile
index 45588cf66e4..23073ded732 100644
--- a/disk/Makefile
+++ b/disk/Makefile
@@ -5,16 +5,16 @@
 
 #ccflags-y += -DET_DEBUG -DDEBUG
 
-obj-$(CONFIG_$(SPL_TPL_)PARTITIONS)  += part.o
-ifdef CONFIG_$(SPL_TPL_)BLK
-obj-$(CONFIG_$(SPL_TPL_)PARTITIONS)  += disk-uclass.o
+obj-$(CONFIG_PARTITIONS)  += part.o
+ifdef CONFIG_BLK
+obj-$(CONFIG_PARTITIONS)  += disk-uclass.o
 endif
 
 # Must have BLK or SPL_LEGACY_BLOCK to support partitions
-ifneq ($(CONFIG_$(SPL_TPL_)BLK),$(CONFIG_SPL_LEGACY_BLOCK),)
-obj-$(CONFIG_$(SPL_TPL_)MAC_PARTITION)   += part_mac.o
-obj-$(CONFIG_$(SPL_TPL_)DOS_PARTITION)   += part_dos.o
-obj-$(CONFIG_$(SPL_TPL_)ISO_PARTITION)   += part_iso.o
-obj-$(CONFIG_$(SPL_TPL_)AMIGA_PARTITION) += part_amiga.o
-obj-$(CONFIG_$(SPL_TPL_)EFI_PARTITION)   += part_efi.o
+ifneq ($(CONFIG_BLK),$(CONFIG_SPL_LEGACY_BLOCK),)
+obj-$(CONFIG_MAC_PARTITION)   += part_mac.o
+obj-$(CONFIG_DOS_PARTITION)   += part_dos.o
+obj-$(CONFIG_ISO_PARTITION)   += part_iso.o
+obj-$(CONFIG_AMIGA_PARTITION) += part_amiga.o
+obj-$(CONFIG_EFI_PARTITION)   += part_efi.o
 endif
diff --git a/doc/develop/tests_writing.rst b/doc/develop/tests_writing.rst
index bb1145da268..a0275b4e843 100644
--- a/doc/develop/tests_writing.rst
+++ b/doc/develop/tests_writing.rst
@@ -320,15 +320,15 @@ to control that.
 Finally, add the test to the build by adding to the Makefile in the same
 directory::
 
-  obj-$(CONFIG_$(SPL_)CMDLINE) += wibble.o
+  obj-$(CONFIG_CMDLINE) += wibble.o
 
 Note that CMDLINE is never enabled in SPL, so this test will only be present in
 U-Boot proper. See below for how to do SPL tests.
 
 As before, you can add an extra Kconfig check if needed::
 
-  ifneq ($(CONFIG_$(SPL_)WIBBLE),)
-  obj-$(CONFIG_$(SPL_)CMDLINE) += wibble.o
+  ifneq ($(CONFIG_WIBBLE),)
+  obj-$(CONFIG_CMDLINE) += wibble.o
   endif
 
 
diff --git a/drivers/Makefile b/drivers/Makefile
index 20497aa2ac9..92869d4109e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,42 +1,42 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
-obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
-obj-$(CONFIG_$(SPL_TPL_)BUTTON) += button/
-obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache/
-obj-$(CONFIG_$(SPL_TPL_)CLK) += clk/
-obj-$(CONFIG_$(SPL_TPL_)DM) += core/
-obj-$(CONFIG_$(SPL_TPL_)DMA) += dma/
-obj-$(CONFIG_$(SPL_TPL_)DMA_LEGACY) += dma/
-obj-$(CONFIG_$(SPL_TPL_)DFU) += dfu/
-obj-$(CONFIG_$(SPL_TPL_)GPIO) += gpio/
-obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC) += misc/
-obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset/
-obj-$(CONFIG_$(SPL_TPL_)FIRMWARE) +=firmware/
-obj-$(CONFIG_$(SPL_TPL_)I2C) += i2c/
-obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/
-obj-$(CONFIG_$(SPL_TPL_)LED) += led/
-obj-$(CONFIG_$(SPL_TPL_)MMC) += mmc/
+obj-$(CONFIG_BLK) += block/
+obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
+obj-$(CONFIG_BUTTON) += button/
+obj-$(CONFIG_CACHE) += cache/
+obj-$(CONFIG_CLK) += clk/
+obj-$(CONFIG_DM) += core/
+obj-$(CONFIG_DMA) += dma/
+obj-$(CONFIG_DMA_LEGACY) += dma/
+obj-$(CONFIG_DFU) += dfu/
+obj-$(CONFIG_GPIO) += gpio/
+obj-$(CONFIG_DRIVERS_MISC) += misc/
+obj-$(CONFIG_SYSRESET) += sysreset/
+obj-$(CONFIG_FIRMWARE) +=firmware/
+obj-$(CONFIG_I2C) += i2c/
+obj-$(CONFIG_INPUT) += input/
+obj-$(CONFIG_LED) += led/
+obj-$(CONFIG_MMC) += mmc/
 obj-y += mtd/
 obj-$(CONFIG_MULTIPLEXER) += mux/
-obj-$(CONFIG_$(SPL_TPL_)ETH) += net/
-obj-$(CONFIG_$(SPL_TPL_)PCH) += pch/
-obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/
-obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
-obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
-obj-$(CONFIG_$(SPL_TPL_)POWER) += power/
-obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/
-obj-$(CONFIG_$(SPL_TPL_)RTC) += rtc/
-obj-$(CONFIG_$(SPL_TPL_)SERIAL) += serial/
-obj-$(CONFIG_$(SPL_TPL_)SPI) += spi/
-obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/
-obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/
-obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox/
-obj-$(CONFIG_$(SPL_)REMOTEPROC) += remoteproc/
-obj-$(CONFIG_$(SPL_)SYSINFO) += sysinfo/
-obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm/
+obj-$(CONFIG_ETH) += net/
+obj-$(CONFIG_PCH) += pch/
+obj-$(CONFIG_PCI) += pci/
+obj-$(CONFIG_PHY) += phy/
+obj-$(CONFIG_PINCTRL) += pinctrl/
+obj-$(CONFIG_POWER) += power/
+obj-$(CONFIG_RAM) += ram/
+obj-$(CONFIG_RTC) += rtc/
+obj-$(CONFIG_SERIAL) += serial/
+obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_TIMER) += timer/
+obj-$(CONFIG_VIRTIO) += virtio/
+obj-$(CONFIG_DM_MAILBOX) += mailbox/
+obj-$(CONFIG_REMOTEPROC) += remoteproc/
+obj-$(CONFIG_SYSINFO) += sysinfo/
+obj-$(CONFIG_TPM) += tpm/
 obj-$(CONFIG_XEN) += xen/
-obj-$(CONFIG_$(SPL_)FPGA) += fpga/
+obj-$(CONFIG_FPGA) += fpga/
 obj-y += bus/
 
 ifndef CONFIG_TPL_BUILD
@@ -48,7 +48,7 @@ obj-$(CONFIG_SPL_CRYPTO) += crypto/
 obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR) += ddr/fsl/
 obj-$(CONFIG_ARMADA_38X) += ddr/marvell/a38x/
 obj-$(CONFIG_ARMADA_XP) += ddr/marvell/axp/
-obj-$(CONFIG_$(SPL_)ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
 obj-$(CONFIG_ARCH_IMX8M) += ddr/imx/imx8m/
 obj-$(CONFIG_IMX8ULP_DRAM) += ddr/imx/imx8ulp/
 obj-$(CONFIG_ARCH_IMX9) += ddr/imx/imx9/
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 6e30180b8b4..0258505eef8 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -5,7 +5,7 @@
 
 obj-$(CONFIG_DWC_AHCI) += dwc_ahci.o
 obj-$(CONFIG_AHCI) += ahci-uclass.o
-obj-$(CONFIG_$(SPL_)AHCI_PCI) += ahci-pci.o
+obj-$(CONFIG_AHCI_PCI) += ahci-pci.o
 obj-$(CONFIG_SCSI_AHCI) += ahci.o
 obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
 obj-$(CONFIG_FSL_SATA) += fsl_sata.o
diff --git a/drivers/block/Makefile b/drivers/block/Makefile
index f12447d78d8..7cb2dd06f3a 100644
--- a/drivers/block/Makefile
+++ b/drivers/block/Makefile
@@ -3,9 +3,9 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_$(SPL_TPL_)BLK) += blk-uclass.o
+obj-$(CONFIG_BLK) += blk-uclass.o
 
-ifndef CONFIG_$(SPL_)BLK
+ifndef CONFIG_BLK
 obj-$(CONFIG_SPL_LEGACY_BLOCK) += blk_legacy.o
 endif
 
@@ -13,7 +13,7 @@ ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_IDE) += ide.o
 endif
 obj-$(CONFIG_SANDBOX) += sandbox.o host-uclass.o host_dev.o
-obj-$(CONFIG_$(SPL_TPL_)BLOCK_CACHE) += blkcache.o
+obj-$(CONFIG_BLOCK_CACHE) += blkcache.o
 
 obj-$(CONFIG_EFI_MEDIA) += efi-media-uclass.o
 obj-$(CONFIG_EFI_MEDIA_SANDBOX) += sb_efi_media.o
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 0802b9666bf..34963997dc1 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -8,4 +8,4 @@ obj-$(CONFIG_TI_PWMSS)	+= ti-pwmss.o
 obj-$(CONFIG_UNIPHIER_SYSTEM_BUS) += uniphier-system-bus.o
 endif
 
-obj-$(CONFIG_$(SPL_)TI_SYSC)	+= ti-sysc.o
+obj-$(CONFIG_TI_SYSC)	+= ti-sysc.o
diff --git a/drivers/cache/Makefile b/drivers/cache/Makefile
index ad765774e32..c023fffbca2 100644
--- a/drivers/cache/Makefile
+++ b/drivers/cache/Makefile
@@ -1,5 +1,5 @@
 
-obj-$(CONFIG_$(SPL_TPL_)CACHE) += cache-uclass.o
+obj-$(CONFIG_CACHE) += cache-uclass.o
 obj-$(CONFIG_SANDBOX) += sandbox_cache.o
 obj-$(CONFIG_L2X0_CACHE) += cache-l2x0.o
 obj-$(CONFIG_NCORE_CACHE) += cache-ncore.o
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index c274cda77c6..6fb73cb1517 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -4,18 +4,18 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 #
 
-obj-$(CONFIG_$(SPL_TPL_)CLK) += clk-uclass.o
-obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_rate.o
-obj-$(CONFIG_$(SPL_TPL_)CLK) += clk_fixed_factor.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk.o clk-divider.o clk-mux.o clk-gate.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk-fixed-factor.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_COMPOSITE_CCF) += clk-composite.o
+obj-$(CONFIG_CLK) += clk-uclass.o
+obj-$(CONFIG_CLK) += clk_fixed_rate.o
+obj-$(CONFIG_CLK) += clk_fixed_factor.o
+obj-$(CONFIG_CLK_CCF) += clk.o clk-divider.o clk-mux.o clk-gate.o
+obj-$(CONFIG_CLK_CCF) += clk-fixed-factor.o
+obj-$(CONFIG_CLK_COMPOSITE_CCF) += clk-composite.o
 
 obj-y += analogbits/
 obj-y += imx/
 obj-y += tegra/
 obj-y += ti/
-obj-$(CONFIG_$(SPL_TPL_)CLK_INTEL) += intel/
+obj-$(CONFIG_CLK_INTEL) += intel/
 obj-$(CONFIG_ARCH_ASPEED) += aspeed/
 obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
 obj-$(CONFIG_ARCH_MESON) += meson/
diff --git a/drivers/clk/imx/Makefile b/drivers/clk/imx/Makefile
index b9c197f952e..07a1db718b2 100644
--- a/drivers/clk/imx/Makefile
+++ b/drivers/clk/imx/Makefile
@@ -2,23 +2,23 @@
 #
 # SPDX-License-Identifier: GPL-2.0
 
-obj-$(CONFIG_$(SPL_TPL_)CLK_CCF) += clk-gate2.o clk-pllv3.o clk-pfd.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMX6Q) += clk-imx6q.o
+obj-$(CONFIG_CLK_CCF) += clk-gate2.o clk-pllv3.o clk-pfd.o
+obj-$(CONFIG_CLK_IMX6Q) += clk-imx6q.o
 obj-$(CONFIG_CLK_IMX8) += clk-imx8.o
 
 ifdef CONFIG_CLK_IMX8
 obj-$(CONFIG_IMX8QXP) += clk-imx8qxp.o
 obj-$(CONFIG_IMX8QM) += clk-imx8qm.o
 endif
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MM) += clk-imx8mm.o clk-pll14xx.o \
+obj-$(CONFIG_CLK_IMX8MM) += clk-imx8mm.o clk-pll14xx.o \
 				clk-composite-8m.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \
+obj-$(CONFIG_CLK_IMX8MN) += clk-imx8mn.o clk-pll14xx.o \
 				clk-composite-8m.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \
+obj-$(CONFIG_CLK_IMX8MP) += clk-imx8mp.o clk-pll14xx.o \
 				clk-composite-8m.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMX8MQ) += clk-imx8mq.o clk-pll14xx.o \
+obj-$(CONFIG_CLK_IMX8MQ) += clk-imx8mq.o clk-pll14xx.o \
 				clk-composite-8m.o
 
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1020) += clk-imxrt1020.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1050) += clk-imxrt1050.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_IMXRT1170) += clk-imxrt1170.o
+obj-$(CONFIG_CLK_IMXRT1020) += clk-imxrt1020.o
+obj-$(CONFIG_CLK_IMXRT1050) += clk-imxrt1050.o
+obj-$(CONFIG_CLK_IMXRT1170) += clk-imxrt1170.o
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 07aa9a53e08..03784dfefd4 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -11,5 +11,5 @@ obj-$(CONFIG_CLK_TI_DIVIDER) += clk-divider.o
 obj-$(CONFIG_CLK_TI_GATE) += clk-gate.o
 obj-$(CONFIG_CLK_TI_MUX) += clk-mux.o
 obj-$(CONFIG_CLK_TI_SCI) += clk-sci.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_K3_PLL) += clk-k3-pll.o
-obj-$(CONFIG_$(SPL_TPL_)CLK_K3) += clk-k3.o
+obj-$(CONFIG_CLK_K3_PLL) += clk-k3-pll.o
+obj-$(CONFIG_CLK_K3) += clk-k3.o
diff --git a/drivers/core/Makefile b/drivers/core/Makefile
index bce0a3f65cb..fc636f5e30f 100644
--- a/drivers/core/Makefile
+++ b/drivers/core/Makefile
@@ -3,15 +3,15 @@
 # Copyright (c) 2013 Google, Inc
 
 obj-y	+= device.o fdtaddr.o lists.o root.o uclass.o util.o tag.o
-obj-$(CONFIG_$(SPL_TPL_)ACPIGEN) += acpi.o
-obj-$(CONFIG_$(SPL_TPL_)DEVRES) += devres.o
-obj-$(CONFIG_$(SPL_TPL_)DM_DEVICE_REMOVE)	+= device-remove.o
-obj-$(CONFIG_$(SPL_)SIMPLE_BUS)	+= simple-bus.o
+obj-$(CONFIG_ACPIGEN) += acpi.o
+obj-$(CONFIG_DEVRES) += devres.o
+obj-$(CONFIG_DM_DEVICE_REMOVE)	+= device-remove.o
+obj-$(CONFIG_SIMPLE_BUS)	+= simple-bus.o
 obj-$(CONFIG_SIMPLE_PM_BUS)	+= simple-pm-bus.o
 obj-$(CONFIG_DM)	+= dump.o
-obj-$(CONFIG_$(SPL_TPL_)REGMAP)	+= regmap.o
-obj-$(CONFIG_$(SPL_TPL_)SYSCON)	+= syscon-uclass.o
-obj-$(CONFIG_$(SPL_)OF_LIVE) += of_access.o of_addr.o
+obj-$(CONFIG_REGMAP)	+= regmap.o
+obj-$(CONFIG_SYSCON)	+= syscon-uclass.o
+obj-$(CONFIG_OF_LIVE) += of_access.o of_addr.o
 ifndef CONFIG_DM_DEV_READ_INLINE
 obj-$(CONFIG_OF_CONTROL) += read.o
 endif
diff --git a/drivers/ddr/altera/Makefile b/drivers/ddr/altera/Makefile
index 9fa5d85a27e..d25b4d460e8 100644
--- a/drivers/ddr/altera/Makefile
+++ b/drivers/ddr/altera/Makefile
@@ -6,7 +6,7 @@
 # (C) Copyright 2010, Thomas Chou <thomas at wytron.com.tw>
 # Copyright (C) 2014-2021 Altera Corporation <www.altera.com>
 
-ifdef CONFIG_$(SPL_)ALTERA_SDRAM
+ifdef CONFIG_ALTERA_SDRAM
 obj-$(CONFIG_TARGET_SOCFPGA_GEN5) += sdram_gen5.o sequencer.o
 obj-$(CONFIG_TARGET_SOCFPGA_ARRIA10) += sdram_arria10.o
 obj-$(CONFIG_TARGET_SOCFPGA_STRATIX10) += sdram_soc64.o sdram_s10.o
diff --git a/drivers/dfu/Makefile b/drivers/dfu/Makefile
index df88f4be59a..41a7df20ad0 100644
--- a/drivers/dfu/Makefile
+++ b/drivers/dfu/Makefile
@@ -3,11 +3,11 @@
 # Copyright (C) 2012 Samsung Electronics
 # Lukasz Majewski <l.majewski at samsung.com>
 
-obj-$(CONFIG_$(SPL_)DFU) += dfu.o
-obj-$(CONFIG_$(SPL_)DFU_MMC) += dfu_mmc.o
-obj-$(CONFIG_$(SPL_)DFU_MTD) += dfu_mtd.o
-obj-$(CONFIG_$(SPL_)DFU_NAND) += dfu_nand.o
-obj-$(CONFIG_$(SPL_)DFU_RAM) += dfu_ram.o
-obj-$(CONFIG_$(SPL_)DFU_SF) += dfu_sf.o
-obj-$(CONFIG_$(SPL_)DFU_WRITE_ALT) += dfu_alt.o
+obj-$(CONFIG_DFU) += dfu.o
+obj-$(CONFIG_DFU_MMC) += dfu_mmc.o
+obj-$(CONFIG_DFU_MTD) += dfu_mtd.o
+obj-$(CONFIG_DFU_NAND) += dfu_nand.o
+obj-$(CONFIG_DFU_RAM) += dfu_ram.o
+obj-$(CONFIG_DFU_SF) += dfu_sf.o
+obj-$(CONFIG_DFU_WRITE_ALT) += dfu_alt.o
 obj-$(CONFIG_DFU_VIRT) += dfu_virt.o
diff --git a/drivers/firmware/Makefile b/drivers/firmware/Makefile
index 7ce83d72bd3..ca7af1a2c56 100644
--- a/drivers/firmware/Makefile
+++ b/drivers/firmware/Makefile
@@ -1,5 +1,5 @@
 obj-$(CONFIG_FIRMWARE)		+= firmware-uclass.o
-obj-$(CONFIG_$(SPL_)ARM_PSCI_FW)	+= psci.o
+obj-$(CONFIG_ARM_PSCI_FW)	+= psci.o
 obj-$(CONFIG_TI_SCI_PROTOCOL)	+= ti_sci.o
 obj-$(CONFIG_SANDBOX)		+= firmware-sandbox.o
 obj-$(CONFIG_ZYNQMP_FIRMWARE)	+= firmware-zynqmp.o
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index fcd136367ac..23996424856 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -8,9 +8,9 @@ obj-$(CONFIG_DWAPB_GPIO)	+= dwapb_gpio.o
 obj-$(CONFIG_AXP_GPIO)		+= axp_gpio.o
 obj-$(CONFIG_DM_74X164)		+= 74x164_gpio.o
 endif
-obj-$(CONFIG_$(SPL_TPL_)DM_GPIO) += gpio-uclass.o
+obj-$(CONFIG_DM_GPIO) += gpio-uclass.o
 
-obj-$(CONFIG_$(SPL_)DM_PCA953X)	+= pca953x_gpio.o
+obj-$(CONFIG_DM_PCA953X)	+= pca953x_gpio.o
 
 obj-$(CONFIG_ASPEED_GPIO)	+= gpio-aspeed.o
 obj-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
@@ -57,8 +57,8 @@ obj-$(CONFIG_PIC32_GPIO)	+= pic32_gpio.o
 obj-$(CONFIG_OCTEON_GPIO)	+= octeon_gpio.o
 obj-$(CONFIG_MVEBU_GPIO)	+= mvebu_gpio.o
 obj-$(CONFIG_MSM_GPIO)		+= msm_gpio.o
-obj-$(CONFIG_$(SPL_)PCF8575_GPIO)	+= pcf8575_gpio.o
-obj-$(CONFIG_$(SPL_TPL_)QCOM_PMIC_GPIO)	+= qcom_pmic_gpio.o
+obj-$(CONFIG_PCF8575_GPIO)	+= pcf8575_gpio.o
+obj-$(CONFIG_QCOM_PMIC_GPIO)	+= qcom_pmic_gpio.o
 obj-$(CONFIG_MT7620_GPIO)	+= mt7620_gpio.o
 obj-$(CONFIG_MT7621_GPIO)	+= mt7621_gpio.o
 obj-$(CONFIG_MSCC_SGPIO)	+= mscc_sgpio.o
@@ -69,6 +69,6 @@ obj-$(CONFIG_MAX7320_GPIO)	+= max7320_gpio.o
 obj-$(CONFIG_SL28CPLD_GPIO)	+= sl28cpld-gpio.o
 obj-$(CONFIG_ZYNQMP_GPIO_MODEPIN)	+= zynqmp_gpio_modepin.o
 obj-$(CONFIG_SLG7XL45106_I2C_GPO)	+= gpio_slg7xl45106.o
-obj-$(CONFIG_$(SPL_TPL_)TURRIS_OMNIA_MCU)	+= turris_omnia_mcu.o
+obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris_omnia_mcu.o
 obj-$(CONFIG_FTGPIO010)		+= ftgpio010.o
 obj-$(CONFIG_ADP5585_GPIO)	+= adp5585_gpio.o
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index cde0597290c..2a873023b6b 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -2,15 +2,15 @@
 #
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
-obj-$(CONFIG_$(SPL_)DM_I2C) += i2c-uclass.o
+obj-$(CONFIG_DM_I2C) += i2c-uclass.o
 ifdef CONFIG_ACPIGEN
-obj-$(CONFIG_$(SPL_)DM_I2C) += acpi_i2c.o
+obj-$(CONFIG_DM_I2C) += acpi_i2c.o
 endif
-obj-$(CONFIG_$(SPL_)DM_I2C_GPIO) += i2c-gpio.o
-obj-$(CONFIG_$(SPL_)I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
-obj-$(CONFIG_$(SPL_)I2C_CROS_EC_LDO) += cros_ec_ldo.o
+obj-$(CONFIG_DM_I2C_GPIO) += i2c-gpio.o
+obj-$(CONFIG_I2C_CROS_EC_TUNNEL) += cros_ec_tunnel.o
+obj-$(CONFIG_I2C_CROS_EC_LDO) += cros_ec_ldo.o
 
-obj-$(CONFIG_$(SPL_)SYS_I2C_LEGACY) += i2c_core.o
+obj-$(CONFIG_SYS_I2C_LEGACY) += i2c_core.o
 obj-$(CONFIG_SYS_I2C_ASPEED) += ast_i2c.o
 obj-$(CONFIG_SYS_I2C_AT91) += at91_i2c.o
 obj-$(CONFIG_SYS_I2C_CADENCE) += i2c-cdns.o
@@ -55,4 +55,4 @@ obj-$(CONFIG_SYS_I2C_VERSATILE) += i2c-versatile.o
 obj-$(CONFIG_SYS_I2C_XILINX_XIIC) += xilinx_xiic.o
 obj-$(CONFIG_TEGRA186_BPMP_I2C) += tegra186_bpmp_i2c.o
 
-obj-$(CONFIG_$(SPL_)I2C_MUX) += muxes/
+obj-$(CONFIG_I2C_MUX) += muxes/
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 11868e7584c..dd1c5574132 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -3,9 +3,9 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_$(SPL_TPL_)CROS_EC_KEYB) += cros_ec_keyb.o
-obj-$(CONFIG_$(SPL_TPL_)OF_CONTROL) += key_matrix.o
-obj-$(CONFIG_$(SPL_TPL_)DM_KEYBOARD) += input.o keyboard-uclass.o
+obj-$(CONFIG_CROS_EC_KEYB) += cros_ec_keyb.o
+obj-$(CONFIG_OF_CONTROL) += key_matrix.o
+obj-$(CONFIG_DM_KEYBOARD) += input.o keyboard-uclass.o
 
 ifndef CONFIG_SPL_BUILD
 
diff --git a/drivers/led/Makefile b/drivers/led/Makefile
index 49ae91961d5..d02308454b1 100644
--- a/drivers/led/Makefile
+++ b/drivers/led/Makefile
@@ -9,5 +9,5 @@ obj-$(CONFIG_LED_BCM6358) += led_bcm6358.o
 obj-$(CONFIG_LED_BCM6753) += led_bcm6753.o
 obj-$(CONFIG_LED_BCM6858) += led_bcm6858.o
 obj-$(CONFIG_LED_PWM) += led_pwm.o
-obj-$(CONFIG_$(SPL_)LED_GPIO) += led_gpio.o
+obj-$(CONFIG_LED_GPIO) += led_gpio.o
 obj-$(CONFIG_LED_CORTINA) += led_cortina.o
diff --git a/drivers/mailbox/Makefile b/drivers/mailbox/Makefile
index 59e8d0de93c..06cba702be7 100644
--- a/drivers/mailbox/Makefile
+++ b/drivers/mailbox/Makefile
@@ -3,7 +3,7 @@
 # Copyright (c) 2016, NVIDIA CORPORATION.
 #
 
-obj-$(CONFIG_$(SPL_)DM_MAILBOX) += mailbox-uclass.o
+obj-$(CONFIG_DM_MAILBOX) += mailbox-uclass.o
 obj-$(CONFIG_APPLE_MBOX) += apple-mbox.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox.o
 obj-$(CONFIG_SANDBOX_MBOX) += sandbox-mbox-test.o
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 3b792f2a14c..6b642a6826d 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -3,12 +3,12 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_$(SPL_TPL_)MISC) += misc-uclass.o
-obj-$(CONFIG_$(SPL_TPL_)NVMEM) += nvmem.o
+obj-$(CONFIG_MISC) += misc-uclass.o
+obj-$(CONFIG_NVMEM) += nvmem.o
 
-obj-$(CONFIG_$(SPL_TPL_)CROS_EC) += cros_ec.o
-obj-$(CONFIG_$(SPL_TPL_)CROS_EC_SANDBOX) += cros_ec_sandbox.o
-obj-$(CONFIG_$(SPL_TPL_)CROS_EC_LPC) += cros_ec_lpc.o
+obj-$(CONFIG_CROS_EC) += cros_ec.o
+obj-$(CONFIG_CROS_EC_SANDBOX) += cros_ec_sandbox.o
+obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpc.o
 
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_SANDBOX) += sandbox_adder.o
@@ -18,7 +18,7 @@ obj-$(CONFIG_SANDBOX) += p2sb_sandbox.o p2sb_emul.o
 obj-$(CONFIG_SANDBOX) += swap_case.o
 endif
 
-ifdef CONFIG_$(SPL_)DM_I2C
+ifdef CONFIG_DM_I2C
 ifndef CONFIG_SPL_BUILD
 obj-$(CONFIG_SANDBOX) += i2c_eeprom_emul.o
 obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o
@@ -37,29 +37,29 @@ obj-$(CONFIG_FSL_DEVICE_DISABLE) += fsl_devdis.o
 obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
 obj-$(CONFIG_FSL_IIM) += fsl_iim.o
 obj-$(CONFIG_FSL_SEC_MON) += fsl_sec_mon.o
-obj-$(CONFIG_$(SPL_)FS_LOADER) += fs_loader.o
+obj-$(CONFIG_FS_LOADER) += fs_loader.o
 obj-$(CONFIG_GATEWORKS_SC) += gsc.o
 obj-$(CONFIG_GDSYS_IOEP) += gdsys_ioep.o
 obj-$(CONFIG_GDSYS_RXAUI_CTRL) += gdsys_rxaui_ctrl.o
 obj-$(CONFIG_GDSYS_SOC) += gdsys_soc.o
 obj-$(CONFIG_IRQ) += irq-uclass.o
 obj-$(CONFIG_SANDBOX) += irq_sandbox.o irq_sandbox_test.o
-obj-$(CONFIG_$(SPL_)I2C_EEPROM) += i2c_eeprom.o
+obj-$(CONFIG_I2C_EEPROM) += i2c_eeprom.o
 obj-$(CONFIG_IHS_FPGA) += ihs_fpga.o
 obj-$(CONFIG_IMX8) += imx8/
 obj-$(CONFIG_IMX_SENTINEL) += sentinel/
 obj-$(CONFIG_LED_STATUS) += status_led.o
 obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
 obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
-obj-$(CONFIG_$(SPL_TPL_)LS2_SFP) += ls2_sfp.o
-obj-$(CONFIG_$(SPL_)MXC_OCOTP) += mxc_ocotp.o
+obj-$(CONFIG_LS2_SFP) += ls2_sfp.o
+obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
 obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
 obj-$(CONFIG_NPCM_OTP) += npcm_otp.o
 obj-$(CONFIG_NPCM_HOST) += npcm_host_intf.o
 obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
 obj-$(CONFIG_P2SB) += p2sb-uclass.o
 obj-$(CONFIG_PCA9551_LED) += pca9551_led.o
-obj-$(CONFIG_$(SPL_)PWRSEQ) += pwrseq-uclass.o
+obj-$(CONFIG_PWRSEQ) += pwrseq-uclass.o
 ifdef CONFIG_QFW
 obj-y += qfw.o
 obj-$(CONFIG_QFW_PIO) += qfw_pio.o
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 3dc757108d5..704d3181214 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -4,17 +4,17 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
 obj-y += mmc.o
-obj-$(CONFIG_$(SPL_)DM_MMC) += mmc-uclass.o
+obj-$(CONFIG_DM_MMC) += mmc-uclass.o
 
-ifdef CONFIG_$(SPL_TPL_)DM_MMC
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += mmc_bootdev.o
+ifdef CONFIG_DM_MMC
+obj-$(CONFIG_BOOTSTD) += mmc_bootdev.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)MMC_WRITE) += mmc_write.o
+obj-$(CONFIG_MMC_WRITE) += mmc_write.o
 obj-$(CONFIG_MMC_PWRSEQ) += mmc-pwrseq.o
 obj-$(CONFIG_MMC_SDHCI_ADMA_HELPERS) += sdhci-adma.o
 
-ifndef CONFIG_$(SPL_)BLK
+ifndef CONFIG_BLK
 obj-y += mmc_legacy.o
 endif
 
diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile
index 3a78590aaaa..813e4fabee8 100644
--- a/drivers/mtd/Makefile
+++ b/drivers/mtd/Makefile
@@ -32,9 +32,9 @@ else
 ifneq ($(mtd-y),)
 obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd.o
 endif
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += nand/
+obj-$(CONFIG_NAND_SUPPORT) += nand/
 obj-$(CONFIG_SPL_ONENAND_SUPPORT) += onenand/
-obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += spi/
+obj-$(CONFIG_SPI_FLASH_SUPPORT) += spi/
 obj-$(CONFIG_SPL_UBI) += ubispl/
 
 endif
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 96e186600a1..e69eea87582 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -6,5 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
 obj-$(CONFIG_MTD_RAW_NAND) += raw/
 obj-$(CONFIG_MTD_SPI_NAND) += spi/
 else
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += raw/
+obj-$(CONFIG_NAND_SUPPORT) += raw/
 endif
diff --git a/drivers/mtd/nand/raw/Makefile b/drivers/mtd/nand/raw/Makefile
index add2b4cf655..cc2ee566926 100644
--- a/drivers/mtd/nand/raw/Makefile
+++ b/drivers/mtd/nand/raw/Makefile
@@ -18,7 +18,7 @@ obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o nand_amd.o nand_hynix.o \
 				nand_macronix.o nand_micron.o \
 				nand_samsung.o nand_toshiba.o
 obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
-obj-$(CONFIG_$(SPL_TPL_)NAND_INIT) += nand.o
+obj-$(CONFIG_NAND_INIT) += nand.o
 ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
 obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
 endif
diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile
index 409395382f5..54943f9fe16 100644
--- a/drivers/mtd/spi/Makefile
+++ b/drivers/mtd/spi/Makefile
@@ -3,12 +3,12 @@
 # (C) Copyright 2006
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_$(SPL_TPL_)DM_SPI_FLASH) += sf-uclass.o
+obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o
 spi-nor-y := sf_probe.o spi-nor-ids.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_SPI_BOOT)	+= fsl_espi_spl.o
-ifeq ($(CONFIG_$(SPL_TPL_)SPI_FLASH_TINY),y)
+ifeq ($(CONFIG_SPI_FLASH_TINY),y)
 spi-nor-y += spi-nor-tiny.o
 else
 spi-nor-y += spi-nor-core.o
@@ -19,6 +19,6 @@ endif
 
 obj-$(CONFIG_SPI_FLASH) += spi-nor.o
 obj-$(CONFIG_SPI_FLASH_DATAFLASH) += sf_dataflash.o
-obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_MTD) += sf_mtd.o
+obj-$(CONFIG_SPI_FLASH_MTD) += sf_mtd.o
 obj-$(CONFIG_SPI_FLASH_SANDBOX) += sandbox.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTDEV_SPI_FLASH) += sf_bootdev.o
+obj-$(CONFIG_BOOTDEV_SPI_FLASH) += sf_bootdev.o
diff --git a/drivers/mux/Makefile b/drivers/mux/Makefile
index d4e24789d33..92d33bde48f 100644
--- a/drivers/mux/Makefile
+++ b/drivers/mux/Makefile
@@ -4,4 +4,4 @@
 # Jean-Jacques Hiblot <jjhiblot at ti.com>
 
 obj-$(CONFIG_MULTIPLEXER) += mux-uclass.o
-obj-$(CONFIG_$(SPL_)MUX_MMIO) += mmio.o
+obj-$(CONFIG_MUX_MMIO) += mmio.o
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index a3b9f3c5b18..a7c318ece61 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -8,8 +8,8 @@ obj-y += marvell/
 obj-y += rockchip/
 obj-y += socionext/
 
-obj-$(CONFIG_$(SPL_)PHY) += phy-uclass.o
-obj-$(CONFIG_$(SPL_)NOP_PHY) += nop-phy.o
+obj-$(CONFIG_PHY) += phy-uclass.o
+obj-$(CONFIG_NOP_PHY) += nop-phy.o
 obj-$(CONFIG_MIPI_DPHY_HELPERS) += phy-core-mipi-dphy.o
 obj-$(CONFIG_AB8500_USB_PHY) += phy-ab8500-usb.o
 obj-$(CONFIG_BCM6318_USBH_PHY) += bcm6318-usbh-phy.o
@@ -18,7 +18,7 @@ obj-$(CONFIG_BCM6358_USBH_PHY) += bcm6358-usbh-phy.o
 obj-$(CONFIG_BCM6368_USBH_PHY) += bcm6368-usbh-phy.o
 obj-$(CONFIG_BCM_SR_PCIE_PHY) += phy-bcm-sr-pcie.o
 obj-$(CONFIG_PHY_SANDBOX) += sandbox-phy.o
-obj-$(CONFIG_$(SPL_)PIPE3_PHY) += ti-pipe3-phy.o
+obj-$(CONFIG_PIPE3_PHY) += ti-pipe3-phy.o
 obj-$(CONFIG_AM654_PHY) += phy-ti-am654.o
 obj-$(CONFIG_STI_USB_PHY) += sti_usb_phy.o
 obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
index 873ddbf0363..647a9a7bd7a 100644
--- a/drivers/phy/ti/Makefile
+++ b/drivers/phy/ti/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_$(SPL_)PHY_J721E_WIZ)	+= phy-j721e-wiz.o
+obj-$(CONFIG_PHY_J721E_WIZ)	+= phy-j721e-wiz.o
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 3b167d099fc..7c5838502ad 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -1,13 +1,13 @@
 # SPDX-License-Identifier: GPL-2.0+
 
 obj-y					+= pinctrl-uclass.o
-obj-$(CONFIG_$(SPL_)PINCTRL_GENERIC)	+= pinctrl-generic.o
+obj-$(CONFIG_PINCTRL_GENERIC)	+= pinctrl-generic.o
 
 obj-$(CONFIG_PINCTRL_APPLE)		+= pinctrl-apple.o
 obj-$(CONFIG_PINCTRL_AT91)		+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_AT91PIO4)		+= pinctrl-at91-pio4.o
 obj-y					+= nxp/
-obj-$(CONFIG_$(SPL_)PINCTRL_ROCKCHIP)	+= rockchip/
+obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= rockchip/
 obj-$(CONFIG_ARCH_ASPEED) += aspeed/
 obj-$(CONFIG_ARCH_ATH79) += ath79/
 obj-$(CONFIG_PINCTRL_INTEL) += intel/
@@ -29,6 +29,6 @@ obj-$(CONFIG_PINCTRL_QE)	+= pinctrl-qe-io.o
 obj-$(CONFIG_PINCTRL_SINGLE)	+= pinctrl-single.o
 obj-$(CONFIG_PINCTRL_STI)	+= pinctrl-sti.o
 obj-$(CONFIG_PINCTRL_STM32)	+= pinctrl_stm32.o
-obj-$(CONFIG_$(SPL_)PINCTRL_STMFX)	+= pinctrl-stmfx.o
+obj-$(CONFIG_PINCTRL_STMFX)	+= pinctrl-stmfx.o
 obj-y				+= broadcom/
 obj-$(CONFIG_PINCTRL_ZYNQMP)	+= pinctrl-zynqmp.o
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index ba64b2c5938..dcce4e3c592 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -3,8 +3,8 @@
 # Copyright (c) 2009 Wind River Systems, Inc.
 # Tom Rix <Tom.Rix at windriver.com>
 
-obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC) += acpi_pmc/
-obj-$(CONFIG_$(SPL_TPL_)POWER_DOMAIN) += domain/
+obj-$(CONFIG_ACPI_PMC) += acpi_pmc/
+obj-$(CONFIG_POWER_DOMAIN) += domain/
 obj-y += pmic/
 obj-y += regulator/
 
@@ -20,9 +20,9 @@ obj-$(CONFIG_TPS6586X_POWER)	+= tps6586x.o
 obj-$(CONFIG_TWL4030_POWER)	+= twl4030.o
 obj-$(CONFIG_TWL6030_POWER)	+= twl6030.o
 obj-$(CONFIG_PALMAS_POWER)	+= palmas.o
-obj-$(CONFIG_$(SPL_TPL_)POWER_LEGACY) += power_core.o
+obj-$(CONFIG_POWER_LEGACY) += power_core.o
 obj-$(CONFIG_DIALOG_POWER) += power_dialog.o
 obj-$(CONFIG_POWER_FSL) += power_fsl.o
-obj-$(CONFIG_$(SPL_TPL_)POWER_I2C) += power_i2c.o
+obj-$(CONFIG_POWER_I2C) += power_i2c.o
 obj-$(CONFIG_POWER_SPI) += power_spi.o
 obj-$(CONFIG_POWER_MT6323) += mt6323.o
diff --git a/drivers/power/acpi_pmc/Makefile b/drivers/power/acpi_pmc/Makefile
index 0db52a65824..36aee3bd720 100644
--- a/drivers/power/acpi_pmc/Makefile
+++ b/drivers/power/acpi_pmc/Makefile
@@ -3,4 +3,4 @@
 # Copyright 2019 Google LLC
 
 obj-y += acpi-pmc-uclass.o
-obj-$(CONFIG_$(SPL_TPL_)ACPI_PMC_SANDBOX) += sandbox.o pmc_emul.o
+obj-$(CONFIG_ACPI_PMC_SANDBOX) += sandbox.o pmc_emul.o
diff --git a/drivers/power/domain/Makefile b/drivers/power/domain/Makefile
index e6244776216..81e4e82a6a1 100644
--- a/drivers/power/domain/Makefile
+++ b/drivers/power/domain/Makefile
@@ -3,7 +3,7 @@
 # Copyright (c) 2016, NVIDIA CORPORATION.
 #
 
-obj-$(CONFIG_$(SPL_)POWER_DOMAIN) += power-domain-uclass.o
+obj-$(CONFIG_POWER_DOMAIN) += power-domain-uclass.o
 obj-$(CONFIG_APPLE_PMGR_POWER_DOMAIN) += apple-pmgr.o
 obj-$(CONFIG_BCM6328_POWER_DOMAIN) += bcm6328-power-domain.o
 obj-$(CONFIG_IMX8_POWER_DOMAIN) += imx8-power-domain-legacy.o imx8-power-domain.o
diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile
index 0b3b3d62d0e..2fc93bb07b5 100644
--- a/drivers/power/pmic/Makefile
+++ b/drivers/power/pmic/Makefile
@@ -3,39 +3,39 @@
 # Copyright (C) 2012 Samsung Electronics
 # Lukasz Majewski <l.majewski at samsung.com>
 
-obj-$(CONFIG_$(SPL_TPL_)DM_PMIC) += pmic-uclass.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_FAN53555) += fan53555.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_DA9063) += da9063.o
+obj-$(CONFIG_DM_PMIC) += pmic-uclass.o
+obj-$(CONFIG_DM_PMIC_FAN53555) += fan53555.o
+obj-$(CONFIG_DM_PMIC_DA9063) += da9063.o
 obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o
 obj-$(CONFIG_DM_PMIC_MAX8998) += max8998.o
 obj-$(CONFIG_DM_PMIC_MC34708) += mc34708.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_BD71837) += bd71837.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_MP5416) += mp5416.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_PCA9450) += pca9450.o
+obj-$(CONFIG_DM_PMIC_BD71837) += bd71837.o
+obj-$(CONFIG_DM_PMIC_MP5416) += mp5416.o
+obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
+obj-$(CONFIG_DM_PMIC_PCA9450) += pca9450.o
 obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o
 obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o
 obj-$(CONFIG_PMIC_AB8500) += ab8500.o
 obj-$(CONFIG_PMIC_ACT8846) += act8846.o
 obj-$(CONFIG_PMIC_AS3722) += as3722.o as3722_gpio.o
-obj-$(CONFIG_$(SPL_)PMIC_AXP) += axp.o
+obj-$(CONFIG_PMIC_AXP) += axp.o
 obj-$(CONFIG_PMIC_MAX8997) += max8997.o
 obj-$(CONFIG_PMIC_QCOM) += pmic_qcom.o
-obj-$(CONFIG_$(SPL_TPL_)PMIC_RK8XX) += rk8xx.o
-obj-$(CONFIG_$(SPL_)PMIC_RN5T567) += rn5t567.o
+obj-$(CONFIG_PMIC_RK8XX) += rk8xx.o
+obj-$(CONFIG_PMIC_RN5T567) += rn5t567.o
 obj-$(CONFIG_PMIC_TPS65090) += tps65090.o
 obj-$(CONFIG_PMIC_S5M8767) += s5m8767.o
 obj-$(CONFIG_DM_PMIC_TPS65910) += pmic_tps65910_dm.o
-obj-$(CONFIG_$(SPL_)PMIC_PALMAS) += palmas.o
-obj-$(CONFIG_$(SPL_)PMIC_LP873X) += lp873x.o
-obj-$(CONFIG_$(SPL_)PMIC_LP87565) += lp87565.o
+obj-$(CONFIG_PMIC_PALMAS) += palmas.o
+obj-$(CONFIG_PMIC_LP873X) += lp873x.o
+obj-$(CONFIG_PMIC_LP87565) += lp87565.o
 obj-$(CONFIG_PMIC_STPMIC1) += stpmic1.o
 obj-$(CONFIG_PMIC_TPS65217) += pmic_tps65217.o
 obj-$(CONFIG_PMIC_TPS65219) += tps65219.o
 obj-$(CONFIG_PMIC_TPS65941) += tps65941.o
 obj-$(CONFIG_POWER_TPS65218) += pmic_tps65218.o
 
-ifeq ($(CONFIG_$(SPL_)POWER_LEGACY),y)
+ifeq ($(CONFIG_POWER_LEGACY),y)
 obj-$(CONFIG_POWER_LTC3676) += pmic_ltc3676.o
 obj-$(CONFIG_POWER_PCA9450) += pmic_pca9450.o
 obj-$(CONFIG_POWER_PFUZE100) += pmic_pfuze100.o
@@ -44,5 +44,5 @@ obj-$(CONFIG_POWER_HI6553) += pmic_hi6553.o
 obj-$(CONFIG_POWER_MC34VR500) += pmic_mc34vr500.o
 endif
 
-obj-$(CONFIG_$(SPL_)POWER_TPS62362) += pmic_tps62362.o
+obj-$(CONFIG_POWER_TPS62362) += pmic_tps62362.o
 obj-$(CONFIG_SPL_POWER_TPS65910) += pmic_tps65910.o
diff --git a/drivers/power/regulator/Makefile b/drivers/power/regulator/Makefile
index 2d97e1033a8..f90a28921f3 100644
--- a/drivers/power/regulator/Makefile
+++ b/drivers/power/regulator/Makefile
@@ -4,35 +4,35 @@
 # Przemyslaw Marczak <p.marczak at samsung.com>
 #
 
-obj-$(CONFIG_$(SPL_)DM_REGULATOR) += regulator-uclass.o
+obj-$(CONFIG_DM_REGULATOR) += regulator-uclass.o
 obj-$(CONFIG_REGULATOR_ACT8846) += act8846.o
 obj-$(CONFIG_REGULATOR_AS3722)	+= as3722_regulator.o
-obj-$(CONFIG_$(SPL_)REGULATOR_AXP) += axp_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_DA9063) += da9063.o
+obj-$(CONFIG_REGULATOR_AXP) += axp_regulator.o
+obj-$(CONFIG_DM_REGULATOR_DA9063) += da9063.o
 obj-$(CONFIG_DM_REGULATOR_MAX77686) += max77686.o
 obj-$(CONFIG_DM_REGULATOR_NPCM8XX) += npcm8xx_regulator.o
-obj-$(CONFIG_$(SPL_)DM_PMIC_PFUZE100) += pfuze100.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_BD71837) += bd71837.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_PCA9450) += pca9450.o
-obj-$(CONFIG_$(SPL_)REGULATOR_PWM) += pwm_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_FAN53555) += fan53555.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_COMMON) += regulator_common.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_FIXED) += fixed.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_GPIO) += gpio-regulator.o
-obj-$(CONFIG_$(SPL_TPL_)REGULATOR_RK8XX) += rk8xx.o
+obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o
+obj-$(CONFIG_DM_REGULATOR_BD71837) += bd71837.o
+obj-$(CONFIG_DM_REGULATOR_PCA9450) += pca9450.o
+obj-$(CONFIG_REGULATOR_PWM) += pwm_regulator.o
+obj-$(CONFIG_DM_REGULATOR_FAN53555) += fan53555.o
+obj-$(CONFIG_DM_REGULATOR_COMMON) += regulator_common.o
+obj-$(CONFIG_DM_REGULATOR_FIXED) += fixed.o
+obj-$(CONFIG_DM_REGULATOR_GPIO) += gpio-regulator.o
+obj-$(CONFIG_REGULATOR_RK8XX) += rk8xx.o
 obj-$(CONFIG_DM_REGULATOR_S2MPS11) += s2mps11_regulator.o
 obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_DM_REGULATOR_SANDBOX) += sandbox.o
 obj-$(CONFIG_REGULATOR_TPS65090) += tps65090_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_PALMAS) += palmas_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_PBIAS) += pbias_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP873X) += lp873x_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_LP87565) += lp87565_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
+obj-$(CONFIG_DM_REGULATOR_PALMAS) += palmas_regulator.o
+obj-$(CONFIG_DM_REGULATOR_PBIAS) += pbias_regulator.o
+obj-$(CONFIG_DM_REGULATOR_LP873X) += lp873x_regulator.o
+obj-$(CONFIG_DM_REGULATOR_LP87565) += lp87565_regulator.o
+obj-$(CONFIG_DM_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_DM_REGULATOR_TPS65910) += tps65910_regulator.o
 obj-$(CONFIG_DM_REGULATOR_TPS62360) += tps62360_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_STPMIC1) += stpmic1.o
+obj-$(CONFIG_DM_REGULATOR_STPMIC1) += stpmic1.o
 obj-$(CONFIG_DM_REGULATOR_TPS65941) += tps65941_regulator.o
 obj-$(CONFIG_DM_REGULATOR_SCMI) += scmi_regulator.o
-obj-$(CONFIG_$(SPL_)DM_REGULATOR_ANATOP) += anatop_regulator.o
+obj-$(CONFIG_DM_REGULATOR_ANATOP) += anatop_regulator.o
 obj-$(CONFIG_DM_REGULATOR_TPS65219) += tps65219_regulator.o
diff --git a/drivers/ram/Makefile b/drivers/ram/Makefile
index 83948e2c43e..5979b5d42c0 100644
--- a/drivers/ram/Makefile
+++ b/drivers/ram/Makefile
@@ -3,7 +3,7 @@
 # Copyright (c) 2015 Google, Inc
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 #
-obj-$(CONFIG_$(SPL_TPL_)DM) += ram-uclass.o
+obj-$(CONFIG_DM) += ram-uclass.o
 obj-$(CONFIG_MPC83XX_SDRAM) += mpc83xx_sdram.o
 obj-$(CONFIG_SANDBOX) += sandbox_ram.o
 obj-$(CONFIG_STM32MP1_DDR) += stm32mp1/
diff --git a/drivers/remoteproc/Makefile b/drivers/remoteproc/Makefile
index fbe9c172bc0..00422806639 100644
--- a/drivers/remoteproc/Makefile
+++ b/drivers/remoteproc/Makefile
@@ -4,7 +4,7 @@
 # Texas Instruments Incorporated - http://www.ti.com/
 #
 
-obj-$(CONFIG_$(SPL_)REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
+obj-$(CONFIG_REMOTEPROC) += rproc-uclass.o rproc-elf-loader.o
 
 # Remote proc drivers - Please keep this list alphabetically sorted.
 obj-$(CONFIG_K3_SYSTEM_CONTROLLER) += k3_system_controller.o
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index b6c9029c8f0..4d1cac6d321 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -4,7 +4,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 #ccflags-y += -DDEBUG
 
-obj-$(CONFIG_$(SPL_TPL_)DM_RTC) += rtc-uclass.o
+obj-$(CONFIG_DM_RTC) += rtc-uclass.o
 
 obj-$(CONFIG_RTC_ARMADA38X) += armada38x.o
 obj-$(CONFIG_RTC_DAVINCI) += davinci.o
@@ -16,7 +16,7 @@ obj-$(CONFIG_RTC_DS3231) += ds3231.o
 obj-$(CONFIG_RTC_DS3232) += ds3232.o
 obj-$(CONFIG_RTC_EMULATION) += emul_rtc.o
 obj-$(CONFIG_RTC_HT1380) += ht1380.o
-obj-$(CONFIG_$(SPL_TPL_)RTC_SANDBOX) += i2c_rtc_emul.o
+obj-$(CONFIG_RTC_SANDBOX) += i2c_rtc_emul.o
 obj-$(CONFIG_RTC_ISL1208) += isl1208.o
 obj-$(CONFIG_RTC_M41T62) += m41t62.o
 obj-$(CONFIG_RTC_MC13XXX) += mc13xxx-rtc.o
@@ -35,6 +35,6 @@ obj-$(CONFIG_RTC_RX8025) += rx8025.o
 obj-$(CONFIG_RTC_RX8010SJ) += rx8010sj.o
 obj-$(CONFIG_RTC_S35392A) += s35392a.o
 obj-$(CONFIG_RTC_STM32) += stm32_rtc.o
-obj-$(CONFIG_$(SPL_TPL_)RTC_SANDBOX) += sandbox_rtc.o
+obj-$(CONFIG_RTC_SANDBOX) += sandbox_rtc.o
 obj-$(CONFIG_RTC_ABX80X) += abx80x.o
 obj-$(CONFIG_RTC_ZYNQMP) += zynqmp_rtc.o
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index d8d6de59090..288f60b40fa 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_SCSI) += scsi.o
 
 ifdef CONFIG_SCSI
 ifdef CONFIG_DM_SCSI
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += scsi_bootdev.o
+obj-$(CONFIG_BOOTSTD) += scsi_bootdev.o
 endif
 endif
 
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 01fef3f323b..5eaa024acb5 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -3,7 +3,7 @@
 # (C) Copyright 2006-2009
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-ifeq ($(CONFIG_$(SPL_TPL_)DM_SERIAL),y)
+ifeq ($(CONFIG_DM_SERIAL),y)
 obj-y += serial-uclass.o
 else
 obj-y += serial.o
@@ -11,7 +11,7 @@ endif
 
 obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
 obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
-obj-$(CONFIG_$(SPL_)SYS_NS16550_SERIAL) += serial_ns16550.o
+obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
 
 obj-$(CONFIG_ALTERA_UART) += altera_uart.o
 obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 95dba9ac455..3dc8d9eb3fe 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -4,7 +4,7 @@
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
 # There are many options which enable SPI, so make this library available
-ifdef CONFIG_$(SPL_TPL_)DM_SPI
+ifdef CONFIG_DM_SPI
 obj-y += spi-uclass.o
 obj-$(CONFIG_CADENCE_QSPI) += cadence_qspi.o cadence_qspi_apb.o
 obj-$(CONFIG_CADENCE_OSPI_VERSAL) += cadence_ospi_versal.o
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index 40c876764af..754d1441777 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -2,7 +2,7 @@
 #
 # (C) Copyright 2016 Cadence Design Systems Inc.
 
-obj-$(CONFIG_$(SPL_TPL_)SYSRESET) += sysreset-uclass.o
+obj-$(CONFIG_SYSRESET) += sysreset-uclass.o
 obj-$(CONFIG_ARCH_ASPEED) += sysreset_ast.o
 obj-$(CONFIG_ARCH_ROCKCHIP) += sysreset_rockchip.o
 obj-$(CONFIG_ARCH_STI) += sysreset_sti.o
@@ -20,6 +20,6 @@ obj-$(CONFIG_SYSRESET_TI_SCI) += sysreset-ti-sci.o
 obj-$(CONFIG_SYSRESET_SYSCON) += sysreset_syscon.o
 obj-$(CONFIG_SYSRESET_WATCHDOG) += sysreset_watchdog.o
 obj-$(CONFIG_SYSRESET_RESETCTL) += sysreset_resetctl.o
-obj-$(CONFIG_$(SPL_TPL_)SYSRESET_AT91) += sysreset_at91.o
-obj-$(CONFIG_$(SPL_TPL_)SYSRESET_X86) += sysreset_x86.o
+obj-$(CONFIG_SYSRESET_AT91) += sysreset_at91.o
+obj-$(CONFIG_SYSRESET_X86) += sysreset_x86.o
 obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
diff --git a/drivers/timer/Makefile b/drivers/timer/Makefile
index 6470fd54266..869988855ad 100644
--- a/drivers/timer/Makefile
+++ b/drivers/timer/Makefile
@@ -9,8 +9,8 @@ obj-$(CONFIG_ARC_TIMER)	+= arc_timer.o
 obj-$(CONFIG_ARM_TWD_TIMER)	+= arm_twd_timer.o
 obj-$(CONFIG_AST_TIMER)	+= ast_timer.o
 obj-$(CONFIG_ATCPIT100_TIMER) += atcpit100_timer.o
-obj-$(CONFIG_$(SPL_)ATMEL_PIT_TIMER) += atmel_pit_timer.o
-obj-$(CONFIG_$(SPL_)ATMEL_TCB_TIMER) += atmel_tcb_timer.o
+obj-$(CONFIG_ATMEL_PIT_TIMER) += atmel_pit_timer.o
+obj-$(CONFIG_ATMEL_TCB_TIMER) += atmel_tcb_timer.o
 obj-$(CONFIG_CADENCE_TTC_TIMER)	+= cadence-ttc.o
 obj-$(CONFIG_DESIGNWARE_APB_TIMER)	+= dw-apb-timer.o
 obj-$(CONFIG_GXP_TIMER)		+= gxp-timer.o
@@ -24,7 +24,7 @@ obj-$(CONFIG_RISCV_TIMER) += riscv_timer.o
 obj-$(CONFIG_ROCKCHIP_TIMER) += rockchip_timer.o
 obj-$(CONFIG_SANDBOX_TIMER)	+= sandbox_timer.o
 obj-$(CONFIG_SP804_TIMER)	+= sp804_timer.o
-obj-$(CONFIG_$(SPL_)SIFIVE_CLINT) += sifive_clint_timer.o
+obj-$(CONFIG_SIFIVE_CLINT) += sifive_clint_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)	+= arm_global_timer.o
 obj-$(CONFIG_STM32_TIMER)	+= stm32_timer.o
 obj-$(CONFIG_X86_TSC_TIMER)	+= tsc_timer.o
diff --git a/drivers/tpm/Makefile b/drivers/tpm/Makefile
index 9540fd7fe78..8616cae2583 100644
--- a/drivers/tpm/Makefile
+++ b/drivers/tpm/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 # Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
 
-obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm-uclass.o
+obj-$(CONFIG_TPM) += tpm-uclass.o
 
 obj-$(CONFIG_TPM_ATMEL_TWI) += tpm_atmel_twi.o
 obj-$(CONFIG_TPM_TIS_INFINEON) += tpm_tis_infineon.o
@@ -10,7 +10,7 @@ obj-$(CONFIG_TPM_TIS_SANDBOX) += tpm_tis_sandbox.o sandbox_common.o
 obj-$(CONFIG_TPM_ST33ZP24_I2C) += tpm_tis_st33zp24_i2c.o
 obj-$(CONFIG_TPM_ST33ZP24_SPI) += tpm_tis_st33zp24_spi.o
 
-obj-$(CONFIG_$(SPL_TPL_)TPM2_CR50_I2C) += cr50_i2c.o
+obj-$(CONFIG_TPM2_CR50_I2C) += cr50_i2c.o
 obj-$(CONFIG_TPM2_TIS_SANDBOX) += tpm2_tis_sandbox.o sandbox_common.o
 obj-$(CONFIG_TPM2_TIS_SPI) += tpm2_tis_core.o tpm2_tis_spi.o
 obj-$(CONFIG_TPM2_TIS_I2C) += tpm2_tis_core.o tpm2_tis_i2c.o
diff --git a/drivers/usb/cdns3/Makefile b/drivers/usb/cdns3/Makefile
index 18d7190755d..f48d59749e2 100644
--- a/drivers/usb/cdns3/Makefile
+++ b/drivers/usb/cdns3/Makefile
@@ -4,8 +4,8 @@ cdns3-y					:= core.o drd.o
 
 obj-$(CONFIG_USB_CDNS3)			+= cdns3.o
 
-cdns3-$(CONFIG_$(SPL_)USB_CDNS3_GADGET)	+= gadget.o ep0.o
+cdns3-$(CONFIG_USB_CDNS3_GADGET)	+= gadget.o ep0.o
 
-cdns3-$(CONFIG_$(SPL_)USB_CDNS3_HOST)	+= host.o
+cdns3-$(CONFIG_USB_CDNS3_HOST)	+= host.o
 
 obj-$(CONFIG_USB_CDNS3_TI)		+= cdns3-ti.o
diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile
index 2e9353b76a6..07bac48a169 100644
--- a/drivers/usb/common/Makefile
+++ b/drivers/usb/common/Makefile
@@ -3,7 +3,7 @@
 # (C) Copyright 2016 Freescale Semiconductor, Inc.
 #
 
-obj-$(CONFIG_$(SPL_)DM_USB) += common.o
+obj-$(CONFIG_DM_USB) += common.o
 obj-$(CONFIG_USB_ISP1760) += usb_urb.o
 obj-$(CONFIG_USB_MUSB_HOST) += usb_urb.o
 obj-$(CONFIG_USB_MUSB_GADGET) += usb_urb.o
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 97b4f7191ca..0dd1ba87cd9 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -9,7 +9,7 @@ obj-$(CONFIG_USB_DWC3_GADGET)		+= gadget.o ep0.o
 obj-$(CONFIG_USB_DWC3_OMAP)		+= dwc3-omap.o
 obj-$(CONFIG_USB_DWC3_MESON_G12A)	+= dwc3-meson-g12a.o
 obj-$(CONFIG_USB_DWC3_MESON_GXL)	+= dwc3-meson-gxl.o
-obj-$(CONFIG_$(SPL_)USB_DWC3_GENERIC)		+= dwc3-generic.o
+obj-$(CONFIG_USB_DWC3_GENERIC)		+= dwc3-generic.o
 obj-$(CONFIG_USB_DWC3_UNIPHIER)		+= dwc3-uniphier.o
 obj-$(CONFIG_USB_DWC3_LAYERSCAPE)	+= dwc3-layerscape.o
 obj-$(CONFIG_USB_DWC3_PHY_OMAP)		+= ti_usb_phy.o
diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile
index 95dbf0c82ee..a554ef66a79 100644
--- a/drivers/usb/gadget/udc/Makefile
+++ b/drivers/usb/gadget/udc/Makefile
@@ -2,9 +2,9 @@
 #
 # USB peripheral controller drivers
 
-ifndef CONFIG_$(SPL_)DM_USB_GADGET
+ifndef CONFIG_DM_USB_GADGET
 obj-$(CONFIG_USB_DWC3_GADGET)	+= udc-core.o
 endif
 
-obj-$(CONFIG_$(SPL_)DM_USB_GADGET)	+= udc-core.o
-obj-$(CONFIG_$(SPL_)DM) += udc-uclass.o
+obj-$(CONFIG_DM_USB_GADGET)	+= udc-core.o
+obj-$(CONFIG_DM) += udc-uclass.o
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 8dad36f9369..27bb49acbeb 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -3,13 +3,13 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-ifdef CONFIG_$(SPL_)DM_USB
+ifdef CONFIG_DM_USB
 obj-y += usb-uclass.o
 obj-$(CONFIG_SANDBOX) += usb-sandbox.o
 endif
 
-ifdef CONFIG_$(SPL_TPL_)USB_STORAGE
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += usb_bootdev.o
+ifdef CONFIG_USB_STORAGE
+obj-$(CONFIG_BOOTSTD) += usb_bootdev.o
 endif
 
 # ohci
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 446d961d7d2..20729bb4fa9 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_XILINX_TB_WATCHDOG) += xilinx_tb_wdt.o
 obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
 obj-$(CONFIG_DESIGNWARE_WATCHDOG) += designware_wdt.o
 obj-$(CONFIG_ULP_WATCHDOG) += ulp_wdog.o
-obj-$(CONFIG_$(SPL_TPL_)WDT) += wdt-uclass.o
+obj-$(CONFIG_WDT) += wdt-uclass.o
 obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
 obj-$(CONFIG_WDT_ALARM_SANDBOX) += sandbox_alarm-wdt.o
 obj-$(CONFIG_WDT_APPLE) += apple_wdt.o
diff --git a/env/Makefile b/env/Makefile
index 673b979fdfa..1cd4407fe45 100644
--- a/env/Makefile
+++ b/env/Makefile
@@ -3,10 +3,10 @@
 # (C) Copyright 2004-2006
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += common.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += env.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += attr.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_SUPPORT) += flags.o
+obj-$(CONFIG_ENV_SUPPORT) += common.o
+obj-$(CONFIG_ENV_SUPPORT) += env.o
+obj-$(CONFIG_ENV_SUPPORT) += attr.o
+obj-$(CONFIG_ENV_SUPPORT) += flags.o
 
 ifndef CONFIG_SPL_BUILD
 obj-y += callback.o
@@ -20,12 +20,12 @@ obj-$(CONFIG_ENV_IS_IN_REMOTE) += remote.o
 obj-$(CONFIG_ENV_IS_IN_UBI) += ubi.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_NOWHERE) += nowhere.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_MMC) += mmc.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_FAT) += fat.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_EXT4) += ext4.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_NAND) += nand.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_SPI_FLASH) += sf.o
-obj-$(CONFIG_$(SPL_TPL_)ENV_IS_IN_FLASH) += flash.o
+obj-$(CONFIG_ENV_IS_NOWHERE) += nowhere.o
+obj-$(CONFIG_ENV_IS_IN_MMC) += mmc.o
+obj-$(CONFIG_ENV_IS_IN_FAT) += fat.o
+obj-$(CONFIG_ENV_IS_IN_EXT4) += ext4.o
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand.o
+obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += sf.o
+obj-$(CONFIG_ENV_IS_IN_FLASH) += flash.o
 
 CFLAGS_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null)
diff --git a/fs/fat/Makefile b/fs/fat/Makefile
index f84efaccc75..1596f0361e6 100644
--- a/fs/fat/Makefile
+++ b/fs/fat/Makefile
@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
 #
 
-obj-$(CONFIG_$(SPL_)FS_FAT) = fat.o
-obj-$(CONFIG_$(SPL_)FAT_WRITE) = fat_write.o
+obj-$(CONFIG_FS_FAT) = fat.o
+obj-$(CONFIG_FAT_WRITE) = fat_write.o
diff --git a/fs/sandbox/Makefile b/fs/sandbox/Makefile
index 880d59dd693..81fa5dc83e4 100644
--- a/fs/sandbox/Makefile
+++ b/fs/sandbox/Makefile
@@ -9,4 +9,4 @@
 # Pavel Bartusek, Sysgo Real-Time Solutions AG, pba at sysgo.de
 
 obj-y := sandboxfs.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTSTD) += host_bootdev.o
+obj-$(CONFIG_BOOTSTD) += host_bootdev.o
diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index ba66ee821c2..8ecb088c91e 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0+
 #
 
-obj-$(CONFIG_$(SPL_)FS_SQUASHFS) = sqfs.o \
+obj-$(CONFIG_FS_SQUASHFS) = sqfs.o \
 				sqfs_inode.o \
 				sqfs_dir.o \
 				sqfs_decompressor.o
diff --git a/lib/Makefile b/lib/Makefile
index 10aa7ac0298..a4048359750 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_OPTEE_LIB) += optee/
 
 obj-$(CONFIG_AES) += aes.o
 obj-$(CONFIG_AES) += aes/
-obj-$(CONFIG_$(SPL_TPL_)BINMAN_FDT) += binman.o
+obj-$(CONFIG_BINMAN_FDT) += binman.o
 
 ifndef API_BUILD
 ifneq ($(CONFIG_CHARSET),)
@@ -55,46 +55,46 @@ obj-$(CONFIG_BITREVERSE) += bitrev.o
 obj-y += list_sort.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)TPM) += tpm-common.o
-ifeq ($(CONFIG_$(SPL_TPL_)TPM),y)
+obj-$(CONFIG_TPM) += tpm-common.o
+ifeq ($(CONFIG_TPM),y)
 obj-$(CONFIG_TPM) += tpm_api.o
 obj-$(CONFIG_TPM_V1) += tpm-v1.o
 obj-$(CONFIG_TPM_V2) += tpm-v2.o
 endif
 
-obj-$(CONFIG_$(SPL_TPL_)CRC8) += crc8.o
+obj-$(CONFIG_CRC8) += crc8.o
 
 obj-y += crypto/
 
-obj-$(CONFIG_$(SPL_TPL_)GENERATE_ACPI_TABLE) += acpi/
-obj-$(CONFIG_$(SPL_)MD5) += md5.o
+obj-$(CONFIG_GENERATE_ACPI_TABLE) += acpi/
+obj-$(CONFIG_MD5) += md5.o
 obj-$(CONFIG_ECDSA) += ecdsa/
-obj-$(CONFIG_$(SPL_)RSA) += rsa/
+obj-$(CONFIG_RSA) += rsa/
 obj-$(CONFIG_HASH) += hash-checksum.o
 obj-$(CONFIG_BLAKE2) += blake2/blake2b.o
 obj-$(CONFIG_SHA1) += sha1.o
 obj-$(CONFIG_SHA256) += sha256.o
 obj-$(CONFIG_SHA512) += sha512.o
 obj-$(CONFIG_CRYPT_PW) += crypt/
-obj-$(CONFIG_$(SPL_)ASN1_DECODER) += asn1_decoder.o
+obj-$(CONFIG_ASN1_DECODER) += asn1_decoder.o
 
-obj-$(CONFIG_$(SPL_)ZLIB) += zlib/
-obj-$(CONFIG_$(SPL_)ZSTD) += zstd/
-obj-$(CONFIG_$(SPL_)GZIP) += gunzip.o
-obj-$(CONFIG_$(SPL_)LZO) += lzo/
-obj-$(CONFIG_$(SPL_)LZMA) += lzma/
-obj-$(CONFIG_$(SPL_)LZ4) += lz4_wrapper.o
+obj-$(CONFIG_ZLIB) += zlib/
+obj-$(CONFIG_ZSTD) += zstd/
+obj-$(CONFIG_GZIP) += gunzip.o
+obj-$(CONFIG_LZO) += lzo/
+obj-$(CONFIG_LZMA) += lzma/
+obj-$(CONFIG_LZ4) += lz4_wrapper.o
 
-obj-$(CONFIG_$(SPL_)LIB_RATIONAL) += rational.o
+obj-$(CONFIG_LIB_RATIONAL) += rational.o
 
 obj-$(CONFIG_LIBAVB) += libavb/
 
-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += libfdt/
-obj-$(CONFIG_$(SPL_TPL_)OF_REAL) += fdtdec_common.o fdtdec.o
+obj-$(CONFIG_OF_LIBFDT) += libfdt/
+obj-$(CONFIG_OF_REAL) += fdtdec_common.o fdtdec.o
 
 ifdef CONFIG_SPL_BUILD
 obj-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16-ccitt.o
-obj-$(CONFIG_$(SPL_TPL_)HASH) += crc16-ccitt.o
+obj-$(CONFIG_HASH) += crc16-ccitt.o
 obj-$(CONFIG_MMC_SPI_CRC_ON) += crc16-ccitt.o
 obj-y += net_utils.o
 endif
@@ -106,11 +106,11 @@ obj-y += display_options.o
 CFLAGS_display_options.o := $(if $(BUILD_TAG),-DBUILD_TAG='"$(BUILD_TAG)"')
 obj-$(CONFIG_BCH) += bch.o
 obj-$(CONFIG_MMC_SPI) += crc7.o
-obj-$(CONFIG_$(SPL_TPL_)CRC32) += crc32.o
+obj-$(CONFIG_CRC32) += crc32.o
 obj-$(CONFIG_CRC32C) += crc32c.o
 obj-y += ctype.o
 obj-y += div64.o
-obj-$(CONFIG_$(SPL_TPL_)OF_LIBFDT) += fdtdec.o fdtdec_common.o
+obj-$(CONFIG_OF_LIBFDT) += fdtdec.o fdtdec_common.o
 obj-y += hang.o
 obj-y += linux_compat.o
 obj-y += linux_string.o
@@ -129,25 +129,25 @@ obj-y += panic.o
 
 ifeq ($(CONFIG_SPL_BUILD),y)
 # SPL U-Boot may use full-printf, tiny-printf or none at all
-ifdef CONFIG_$(SPL_TPL_)USE_TINY_PRINTF
-obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += tiny-printf.o
+ifdef CONFIG_USE_TINY_PRINTF
+obj-$(CONFIG_SPRINTF) += tiny-printf.o
 else
-obj-$(CONFIG_$(SPL_TPL_)SPRINTF) += vsprintf.o
+obj-$(CONFIG_SPRINTF) += vsprintf.o
 endif
-obj-$(CONFIG_$(SPL_TPL_)STRTO) += strto.o
+obj-$(CONFIG_STRTO) += strto.o
 else
 # Main U-Boot always uses the full printf support
 obj-y += vsprintf.o strto.o
 obj-$(CONFIG_SSCANF) += sscanf.o
 endif
-obj-$(CONFIG_$(SPL_)OID_REGISTRY) += oid_registry.o
+obj-$(CONFIG_OID_REGISTRY) += oid_registry.o
 
 obj-y += abuf.o
 obj-y += date.o
 obj-y += rtc-lib.o
 obj-$(CONFIG_LIB_ELF) += elf.o
 
-obj-$(CONFIG_$(SPL_TPL_)SEMIHOSTING) += semihosting.o
+obj-$(CONFIG_SEMIHOSTING) += semihosting.o
 
 #
 # Build a fast OID lookup registry from include/linux/oid_registry.h
diff --git a/lib/acpi/Makefile b/lib/acpi/Makefile
index 956b5a0d726..6ee363aa66b 100644
--- a/lib/acpi/Makefile
+++ b/lib/acpi/Makefile
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0+
 #
 
-obj-$(CONFIG_$(SPL_)ACPIGEN) += acpigen.o
-obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi_device.o
-obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi_dp.o
-obj-$(CONFIG_$(SPL_)ACPIGEN) += acpi_table.o
+obj-$(CONFIG_ACPIGEN) += acpigen.o
+obj-$(CONFIG_ACPIGEN) += acpi_device.o
+obj-$(CONFIG_ACPIGEN) += acpi_dp.o
+obj-$(CONFIG_ACPIGEN) += acpi_table.o
 obj-y += acpi_writer.o
 
 # With QEMU the ACPI tables come from there, not from U-Boot
diff --git a/lib/aes/Makefile b/lib/aes/Makefile
index daed52a713b..f908ce1df21 100644
--- a/lib/aes/Makefile
+++ b/lib/aes/Makefile
@@ -2,4 +2,4 @@
 #
 # Copyright (c) 2019, Softathome
 
-obj-$(CONFIG_$(SPL_)FIT_CIPHER) += aes-decrypt.o
+obj-$(CONFIG_FIT_CIPHER) += aes-decrypt.o
diff --git a/lib/crypto/Makefile b/lib/crypto/Makefile
index bec1bc95a65..3f65b02ede2 100644
--- a/lib/crypto/Makefile
+++ b/lib/crypto/Makefile
@@ -3,16 +3,16 @@
 # Makefile for asymmetric cryptographic keys
 #
 
-obj-$(CONFIG_$(SPL_)ASYMMETRIC_KEY_TYPE) += asymmetric_keys.o
+obj-$(CONFIG_ASYMMETRIC_KEY_TYPE) += asymmetric_keys.o
 
 asymmetric_keys-y := asymmetric_type.o
 
-obj-$(CONFIG_$(SPL_)ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
+obj-$(CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE) += public_key.o
 
 #
 # RSA public key parser
 #
-obj-$(CONFIG_$(SPL_)RSA_PUBLIC_KEY_PARSER) += rsa_public_key.o
+obj-$(CONFIG_RSA_PUBLIC_KEY_PARSER) += rsa_public_key.o
 rsa_public_key-y := \
 	rsapubkey.asn1.o \
 	rsa_helper.o
@@ -30,7 +30,7 @@ endif
 #
 # X.509 Certificate handling
 #
-obj-$(CONFIG_$(SPL_)X509_CERTIFICATE_PARSER) += x509_key_parser.o
+obj-$(CONFIG_X509_CERTIFICATE_PARSER) += x509_key_parser.o
 x509_key_parser-y := \
 	x509.asn1.o \
 	x509_akid.asn1.o \
@@ -47,11 +47,11 @@ $(obj)/x509_akid.asn1.o: $(obj)/x509_akid.asn1.c $(obj)/x509_akid.asn1.h
 #
 # PKCS#7 message handling
 #
-obj-$(CONFIG_$(SPL_)PKCS7_MESSAGE_PARSER) += pkcs7_message.o
+obj-$(CONFIG_PKCS7_MESSAGE_PARSER) += pkcs7_message.o
 pkcs7_message-y := \
 	pkcs7.asn1.o \
 	pkcs7_parser.o
-obj-$(CONFIG_$(SPL_)PKCS7_VERIFY) += pkcs7_verify.o
+obj-$(CONFIG_PKCS7_VERIFY) += pkcs7_verify.o
 
 $(obj)/pkcs7_parser.o: $(obj)/pkcs7.asn1.h
 $(obj)/pkcs7.asn1.o: $(obj)/pkcs7.asn1.c $(obj)/pkcs7.asn1.h
@@ -59,7 +59,7 @@ $(obj)/pkcs7.asn1.o: $(obj)/pkcs7.asn1.c $(obj)/pkcs7.asn1.h
 #
 # Signed PE binary-wrapped key handling
 #
-obj-$(CONFIG_$(SPL_)MSCODE_PARSER) += mscode.o
+obj-$(CONFIG_MSCODE_PARSER) += mscode.o
 
 mscode-y := \
 	mscode_parser.o \
diff --git a/lib/ecdsa/Makefile b/lib/ecdsa/Makefile
index 771d6d3135b..bf08a036737 100644
--- a/lib/ecdsa/Makefile
+++ b/lib/ecdsa/Makefile
@@ -1 +1 @@
-obj-$(CONFIG_$(SPL_)ECDSA_VERIFY) += ecdsa-verify.o
+obj-$(CONFIG_ECDSA_VERIFY) += ecdsa-verify.o
diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile
index 1fe50ecbe52..e80b8b99554 100644
--- a/lib/libfdt/Makefile
+++ b/lib/libfdt/Makefile
@@ -16,4 +16,4 @@ obj-y += \
 obj-$(CONFIG_OF_LIBFDT_OVERLAY) += fdt_overlay.o
 
 ccflags-y := -I$(srctree)/scripts/dtc/libfdt \
-	-DFDT_ASSUME_MASK=$(CONFIG_$(SPL_TPL_)OF_LIBFDT_ASSUME_MASK)
+	-DFDT_ASSUME_MASK=$(CONFIG_OF_LIBFDT_ASSUME_MASK)
diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile
index c9ac72c1e26..5ac56228ac7 100644
--- a/lib/rsa/Makefile
+++ b/lib/rsa/Makefile
@@ -5,6 +5,6 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd at denx.de.
 
-obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY) += rsa-verify.o
-obj-$(CONFIG_$(SPL_TPL_)RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o
+obj-$(CONFIG_RSA_VERIFY) += rsa-verify.o
+obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o
 obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
diff --git a/net/Makefile b/net/Makefile
index bea000b2067..9e115f5a1d5 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -10,14 +10,14 @@ obj-$(CONFIG_CMD_BOOTP) += bootp.o
 obj-$(CONFIG_CMD_CDP)  += cdp.o
 obj-$(CONFIG_CMD_DNS)  += dns.o
 obj-$(CONFIG_DM_DSA)   += dsa-uclass.o
-obj-$(CONFIG_$(SPL_)DM_ETH) += eth-uclass.o
-obj-$(CONFIG_$(SPL_TPL_)BOOTDEV_ETH) += eth_bootdev.o
+obj-$(CONFIG_DM_ETH) += eth-uclass.o
+obj-$(CONFIG_BOOTDEV_ETH) += eth_bootdev.o
 obj-$(CONFIG_DM_MDIO)  += mdio-uclass.o
 obj-$(CONFIG_DM_MDIO_MUX) += mdio-mux-uclass.o
-obj-$(CONFIG_$(SPL_)DM_ETH) += eth_common.o
+obj-$(CONFIG_DM_ETH) += eth_common.o
 obj-$(CONFIG_CMD_LINK_LOCAL) += link_local.o
 obj-$(CONFIG_IPV6)     += ndisc.o
-obj-$(CONFIG_$(SPL_)DM_ETH) += net.o
+obj-$(CONFIG_DM_ETH) += net.o
 obj-$(CONFIG_IPV6)     += net6.o
 obj-$(CONFIG_CMD_NFS)  += nfs.o
 obj-$(CONFIG_CMD_PING) += ping.o
diff --git a/scripts/Kbuild.include b/scripts/Kbuild.include
index b7668694101..66390240d19 100644
--- a/scripts/Kbuild.include
+++ b/scripts/Kbuild.include
@@ -319,8 +319,3 @@ endif
 
 # do not delete intermediate files automatically
 .SECONDARY:
-
-# The SPL_ and SPL_TPL_ vars resolve to nothing so they can be used in
-# Makefiles
-SPL_ :=
-SPL_TPL_ :=
diff --git a/scripts/Makefile.dts b/scripts/Makefile.dts
index 2561025da82..8fac12fccbe 100644
--- a/scripts/Makefile.dts
+++ b/scripts/Makefile.dts
@@ -1,3 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0+
 
-dtb-y += $(patsubst %,%.dtb,$(subst ",,$(CONFIG_$(SPL_)OF_LIST)))
+dtb-y += $(patsubst %,%.dtb,$(subst ",,$(CONFIG_OF_LIST)))
diff --git a/scripts/Makefile.spl b/scripts/Makefile.spl
index 3009a8b0d4b..634b59c071f 100644
--- a/scripts/Makefile.spl
+++ b/scripts/Makefile.spl
@@ -54,11 +54,6 @@ endif
 
 export SPL_NAME
 
-# The SPL_ and SPL_TPL_ vars resolve to nothing so they can be used in
-# Makefiles
-SPL_ :=
-SPL_TPL_ :=
-
 ifeq ($(obj)$(CONFIG_SUPPORT_SPL),spl)
 $(error You cannot build SPL without enabling CONFIG_SUPPORT_SPL)
 endif
@@ -78,7 +73,7 @@ include $(srctree)/scripts/Makefile.lib
 KBUILD_CFLAGS += -ffunction-sections -fdata-sections
 LDFLAGS_FINAL += --gc-sections
 
-ifeq ($(CONFIG_$(SPL_TPL_)STACKPROTECTOR),y)
+ifeq ($(CONFIG_STACKPROTECTOR),y)
 KBUILD_CFLAGS += -fstack-protector-strong
 else
 KBUILD_CFLAGS += -fno-stack-protector
@@ -102,8 +97,8 @@ endif
 libs-y += common/init/
 
 # Special handling for a few options which support SPL/TPL/VPL
-libs-$(CONFIG_$(SPL_TPL_)LIBCOMMON_SUPPORT) += boot/ common/ cmd/ env/
-libs-$(CONFIG_$(SPL_TPL_)LIBGENERIC_SUPPORT) += lib/
+libs-$(CONFIG_LIBCOMMON_SUPPORT) += boot/ common/ cmd/ env/
+libs-$(CONFIG_LIBGENERIC_SUPPORT) += lib/
 ifdef CONFIG_SPL_FRAMEWORK
 libs-$(CONFIG_PARTITIONS) += disk/
 endif
@@ -116,7 +111,7 @@ libs-y += dts/
 libs-y += fs/
 libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
 libs-$(CONFIG_SPL_NET) += net/
-libs-$(CONFIG_$(SPL_TPL_)UNIT_TEST) += test/
+libs-$(CONFIG_UNIT_TEST) += test/
 
 head-y		:= $(addprefix $(obj)/,$(head-y))
 libs-y		:= $(addprefix $(obj)/,$(libs-y))
@@ -132,12 +127,12 @@ endif
 
 u-boot-spl-init := $(head-y)
 u-boot-spl-main := $(libs-y)
-ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA
+ifdef CONFIG_OF_PLATDATA
 platdata-hdr := include/generated/dt-structs-gen.h include/generated/dt-decl.h
 platdata-inst := $(obj)/dts/dt-uclass.o $(obj)/dts/dt-device.o
 platdata-noinst := $(obj)/dts/dt-plat.o
 
-ifdef CONFIG_$(SPL_TPL_)OF_PLATDATA_INST
+ifdef CONFIG_OF_PLATDATA_INST
 u-boot-spl-platdata := $(platdata-inst)
 u-boot-spl-old-platdata := $(platdata-noinst)
 else
@@ -154,9 +149,9 @@ endif  # OF_PLATDATA
 
 # Linker Script
 # First test whether there's a linker-script for the specific stage defined...
-ifneq ($(CONFIG_$(SPL_TPL_)LDSCRIPT),)
+ifneq ($(CONFIG_LDSCRIPT),)
 # need to strip off double quotes
-LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_$(SPL_TPL_)LDSCRIPT:"%"=%))
+LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_LDSCRIPT:"%"=%))
 else
 # ...then fall back to the generic SPL linker-script
 ifneq ($(CONFIG_SPL_LDSCRIPT),)
@@ -190,11 +185,11 @@ LDPPFLAGS += \
 
 # Turn various CONFIG symbols into IMAGE symbols for easy reuse of
 # the scripts between SPL, TPL and VPL.
-ifneq ($(CONFIG_$(SPL_TPL_)MAX_SIZE),0x0)
-LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_$(SPL_TPL_)MAX_SIZE)
+ifneq ($(CONFIG_MAX_SIZE),0x0)
+LDPPFLAGS += -DIMAGE_MAX_SIZE=$(CONFIG_MAX_SIZE)
 endif
-ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
-LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_$(SPL_TPL_)TEXT_BASE)
+ifneq ($(CONFIG_TEXT_BASE),)
+LDPPFLAGS += -DIMAGE_TEXT_BASE=$(CONFIG_TEXT_BASE)
 endif
 
 MKIMAGEOUTPUT ?= /dev/null
@@ -308,7 +303,7 @@ endif
 #   - OF_REAL is enabled
 #   - we have either OF_SEPARATE or OF_HOSTFILE
 build_dtb :=
-ifneq ($(CONFIG_$(SPL_TPL_)OF_REAL),)
+ifneq ($(CONFIG_OF_REAL),)
 ifeq ($(CONFIG_OF_SEPARATE)$(CONFIG_SANDBOX),y)
 build_dtb := y
 endif
@@ -316,7 +311,7 @@ endif
 
 ifneq ($(build_dtb),)
 $(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
-		$(if $(CONFIG_$(SPL_TPL_)SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
+		$(if $(CONFIG_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
 		$(FINAL_DTB_CONTAINER)  FORCE
 	$(call if_changed,cat)
 
@@ -340,7 +335,7 @@ pythonpath = PYTHONPATH=scripts/dtc/pylibfdt
 DTOC_ARGS := $(pythonpath) $(srctree)/tools/dtoc/dtoc \
 	-d $(obj)/$(SPL_BIN).dtb -p $(SPL_NAME)
 
-ifneq ($(CONFIG_$(SPL_TPL_)OF_PLATDATA_INST),)
+ifneq ($(CONFIG_OF_PLATDATA_INST),)
 DTOC_ARGS += -i
 endif
 
@@ -380,7 +375,7 @@ quiet_cmd_objcopy = OBJCOPY $@
 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 
 OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
-		$(if $(CONFIG_$(SPL_TPL_)X86_16BIT_INIT),-R .start16 -R .resetvec)
+		$(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec)
 
 $(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
 	$(call if_changed,objcopy)
@@ -409,8 +404,8 @@ LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
 LDFLAGS_$(SPL_BIN) += --build-id=none
 
 # Pick the best match (e.g. SPL_TEXT_BASE for SPL, TPL_TEXT_BASE for TPL)
-ifneq ($(CONFIG_$(SPL_TPL_)TEXT_BASE),)
-LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_$(SPL_TPL_)TEXT_BASE)
+ifneq ($(CONFIG_TEXT_BASE),)
+LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_TEXT_BASE)
 endif
 
 ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
diff --git a/test/Makefile b/test/Makefile
index 178773647a8..96dab0f01b9 100644
--- a/test/Makefile
+++ b/test/Makefile
@@ -7,21 +7,21 @@ ifdef CONFIG_SPL_LOAD_FIT
 obj-$(CONFIG_SANDBOX) += image/
 endif
 
-ifneq ($(CONFIG_$(SPL_)BLOBLIST),)
-obj-$(CONFIG_$(SPL_)CMDLINE) += bloblist.o
-obj-$(CONFIG_$(SPL_)CMDLINE) += bootm.o
+ifneq ($(CONFIG_BLOBLIST),)
+obj-$(CONFIG_CMDLINE) += bloblist.o
+obj-$(CONFIG_CMDLINE) += bootm.o
 endif
-obj-$(CONFIG_$(SPL_)CMDLINE) += cmd/
-obj-$(CONFIG_$(SPL_)CMDLINE) += cmd_ut.o
-obj-$(CONFIG_$(SPL_)CMDLINE) += command_ut.o
-obj-$(CONFIG_$(SPL_)UT_COMPRESSION) += compression.o
+obj-$(CONFIG_CMDLINE) += cmd/
+obj-$(CONFIG_CMDLINE) += cmd_ut.o
+obj-$(CONFIG_CMDLINE) += command_ut.o
+obj-$(CONFIG_UT_COMPRESSION) += compression.o
 obj-y += dm/
 obj-$(CONFIG_FUZZ) += fuzz/
 ifndef CONFIG_SANDBOX_VPL
 obj-$(CONFIG_UNIT_TEST) += lib/
 endif
-obj-$(CONFIG_$(SPL_)CMDLINE) += print_ut.o
-obj-$(CONFIG_$(SPL_)CMDLINE) += str_ut.o
+obj-$(CONFIG_CMDLINE) += print_ut.o
+obj-$(CONFIG_CMDLINE) += str_ut.o
 obj-$(CONFIG_UT_TIME) += time_ut.o
 obj-y += ut.o
 
@@ -29,5 +29,5 @@ ifeq ($(CONFIG_SPL_BUILD),)
 obj-$(CONFIG_UNIT_TEST) += boot/
 obj-$(CONFIG_UNIT_TEST) += common/
 obj-y += log/
-obj-$(CONFIG_$(SPL_)UT_UNICODE) += unicode_ut.o
+obj-$(CONFIG_UT_UNICODE) += unicode_ut.o
 endif
diff --git a/test/dm/Makefile b/test/dm/Makefile
index 7a79b6e1a25..340a556a324 100644
--- a/test/dm/Makefile
+++ b/test/dm/Makefile
@@ -36,7 +36,7 @@ obj-$(CONFIG_CLK) += clk.o clk_ccf.o
 obj-$(CONFIG_CPU) += cpu.o
 obj-$(CONFIG_CROS_EC) += cros_ec.o
 obj-$(CONFIG_PWM_CROS_EC) += cros_ec_pwm.o
-obj-$(CONFIG_$(SPL_TPL_)DEVRES) += devres.o
+obj-$(CONFIG_DEVRES) += devres.o
 obj-$(CONFIG_DMA) += dma.o
 obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi_host.o
 obj-$(CONFIG_DM_DSA) += dsa.o
diff --git a/test/fuzz/Makefile b/test/fuzz/Makefile
index 663b79ce80b..4a9b647bbc0 100644
--- a/test/fuzz/Makefile
+++ b/test/fuzz/Makefile
@@ -4,5 +4,5 @@
 # Written by Andrew Scull <ascull at google.com>
 #
 
-obj-$(CONFIG_$(SPL_)CMDLINE) += cmd_fuzz.o
+obj-$(CONFIG_CMDLINE) += cmd_fuzz.o
 obj-$(CONFIG_VIRTIO_SANDBOX) += virtio.o
-- 
2.39.1.519.gcb327c4b5f-goog

