rk3328 broken between v2022.04 and v2022.07 - still not working with v2023.01

[Janpieter Sollie]

Op 10/02/2023 om 13:41 schreef Peter Robinson:
> On Fri, Feb 10, 2023 at 12:31 PM Janpieter Sollie
> <janpieter.sollie at kabelmail.de>  wrote:
>> Hello,
>>
>> After a few years, I tried updating my u-boot 2021 to a more recent version, as the linux kernel
>> complained "ATF needs update".
>> The device I'm using is a nanopi neo3 2GB (more or less the same compared to NanoPi R2S, both
>> RK3328 platform).
>>
>> Starting from 2023.04-rc1, I couldn't get it running: in TPL, it complained "out of memory".
>> A hint on IRC made me pull back to v2022.04, which works with a few mods, but there's one
>> (minor) thing not working:
>> board_misc_init() causes a function call failed.  Probably because efuse isn't working properly?
>> I also had to modify the device tree a bit:
> I have the Rock64 running 2022.10 without issues.
>
On your advice, I tested these as well 2022.10 and 2023.1.
seems to work when the patches are applied.  However, still no misc_init():

initcall sequence 000000007ffcf0b0 failed at call 0000000000202ff8 (err=-1)
### ERROR ### Please RESET the board ###

in the map file I see this points to misc_init()
but I guess your advice already obsoletes my statement, it's only "2023.04-rc1" now.
make oldconfig seems to be a bad idea, simply defconfig and make modifications again seems to be 
a much safer choice.

Any way I could help fixing the misc_init_f()?

kind regards,

Janpieter Sollie