[PATCH 3/3] board: Add new Broadcom Northstar board

[Tom Rini]

On Thu, Feb 02, 2023 at 12:37:45AM +0100, Linus Walleij wrote:

> This adds a simple Northstar "BRCMNS" board to be used with
> the BCM4709x and BCM5301x chips.
> 
> The main intention is to use this with the D-Link DIR-890L
> and DIR-885L routers for loading the kernel into RAM from
> NAND memory using the BCH-1 ECC and using the separately
> submitted SEAMA load command, so we are currently not adding
> support for things such as networking.
> 
> If other board need other ECC for example, they need to
> create a separate DTS file and augment the code, but I don't
> know if any other users will turn up.
> 
> Cc: Rafał Miłecki <rafal at milecki.pl>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>

As it stands, this fails to link:
       arm:  +   bcmns
+(bcmns) arm-linux-gnueabi-ld.bfd: drivers/mtd/nand/raw/nand.o: in function `nand_init':
+(bcmns) drivers/mtd/nand/raw/nand.c:159: undefined reference to `board_nand_init'
+(bcmns) make[1]: *** [Makefile:1752: u-boot] Error 1
+(bcmns) make: *** [Makefile:177: sub-make] Error 2

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20230210/c4d5e36b/attachment.sig>