[PATCH v2 4/8] board: MCR3000: Remove update of non-existing e1-wan DT node

[Christophe Leroy]

e1-wan device-tree node doesn't exist. Remove related update
to avoid following warning at startup:

	 Loading Device Tree to 007fa000, end 007ff951 ... OK
	Unable to update property /localbus/e1-wan:data-rate, err=FDT_ERR_NOTFOUND
	Unable to update property /localbus/e1-wan:channel-phase, err=FDT_ERR_NOTFOUND
	Unable to update property /localbus/e1-wan:rising-edge-sync-pulse, err=FDT_ERR_NOTFOUND

Signed-off-by: Christophe Leroy <christophe.leroy at csgroup.eu>
Reviewed-by: FRANJOU Stephane <stephane.franjou at csgroup.eu>
---
 board/cssi/mcr3000/mcr3000.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/board/cssi/mcr3000/mcr3000.c b/board/cssi/mcr3000/mcr3000.c
index e95e04a30a..7b3ab12bd5 100644
--- a/board/cssi/mcr3000/mcr3000.c
+++ b/board/cssi/mcr3000/mcr3000.c
@@ -58,8 +58,6 @@ static const uint cs1_dram_table_66[] = {
 
 int ft_board_setup(void *blob, struct bd_info *bd)
 {
-	const char *sync = "receive";
-
 	ft_cpu_setup(blob, bd);
 
 	/* BRG */
@@ -72,16 +70,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 	/* Bus Frequency for CPM */
 	do_fixup_by_path_u32(blob, "/soc", "bus-frequency", bd->bi_busfreq, 1);
 
-	/* E1 interface - Set data rate */
-	do_fixup_by_path_u32(blob, "/localbus/e1-wan", "data-rate", 2, 1);
-
-	/* E1 interface - Set channel phase to 0 */
-	do_fixup_by_path_u32(blob, "/localbus/e1-wan", "channel-phase", 0, 1);
-
-	/* E1 interface - rising edge sync pulse transmit */
-	do_fixup_by_path(blob, "/localbus/e1-wan", "rising-edge-sync-pulse",
-			 sync, strlen(sync), 1);
-
 	return 0;
 }
 
-- 
2.39.1