[PATCH v2 2/4] arm64: dts: imx8mp: Add EQoS RMII pin mux on i.MX8MP DHCOM

[Marek Vasut]

The i.MX8MP DHCOM SoM may come with either KSZ9131RNXI RGMII PHY
or LAN8740Ai RMII PHY on the SoM attached to EQoS MAC. Add pin
mux settings for both options, so that DT overlay can override
these settings on SoM variant with the LAN8740Ai PHY.

Signed-off-by: Marek Vasut <marex at denx.de>
---
Cc: "NXP i.MX U-Boot Team" <uboot-imx at nxp.com>
Cc: Fabio Estevam <festevam at gmail.com>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefano Babic <sbabic at denx.de>
Cc: u-boot at lists.denx.de
---
V2: No change
---
 arch/arm/dts/imx8mp-dhcom-som.dtsi | 20 ++++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx8mp-dhcom-som.dtsi b/arch/arm/dts/imx8mp-dhcom-som.dtsi
index 304c94557ed..b56607dfb39 100644
--- a/arch/arm/dts/imx8mp-dhcom-som.dtsi
+++ b/arch/arm/dts/imx8mp-dhcom-som.dtsi
@@ -83,7 +83,7 @@
 
 &eqos {	/* First ethernet */
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-0 = <&pinctrl_eqos_rgmii>;
 	phy-handle = <&ethphy0g>;
 	phy-mode = "rgmii-id";
 	status = "okay";
@@ -664,7 +664,7 @@
 		>;
 	};
 
-	pinctrl_eqos: dhcom-eqos-grp {	/* RGMII */
+	pinctrl_eqos_rgmii: dhcom-eqos-rgmii-grp {	/* RGMII */
 		fsl,pins = <
 			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
 			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
@@ -683,6 +683,22 @@
 		>;
 	};
 
+	pinctrl_eqos_rmii: dhcom-eqos-rmii-grp {	/* RMII */
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_RXC__ENET_QOS_RX_ER		0x1f
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			/* Clock */
+			MX8MP_IOMUXC_ENET_TD2__CCM_ENET_QOS_CLOCK_GENERATE_REF_CLK	0x4000001f
+		>;
+	};
+
 	pinctrl_enet_vio: dhcom-enet-vio-grp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x22
-- 
2.39.1