[PATCH v3] arm: mvebu: Add support for Thecus N2350 (Armada 385) board

Stefan Roese sr at denx.de
Mon Feb 13 14:59:37 CET 2023


On 2/2/23 00:13, Tony Dinh wrote:
> Thecus N2350 is a NAS based on Marvell Armada 385 SoC.
> 
> Specification:
> 
> - Processor: Marvel MV88F6820 Dual Core at 1GHz
> - 1 GiB DDR4 RAM
> - 4MB Macronix mx25l3205d SPI flash
> - 512MB Hynix H27U4G8F2DTR-BC NAND flash
> - I2C
> - 2x USB 3.0
> - 1x GBE LAN port (PHY: Marvell 88E1510)
> - 2x SATA (hot swap slots)
> - 3x buttons
> - 10x LEDS
> - serial console
> 
> Signed-off-by: Tony Dinh <mibodhi at gmail.com>

Applied to u-boot-marvell/master

Thanks,
Stefan

> ---
> 
> Changes in v3:
> - Add missing DTS file path in MAINTAINERS file
> - Remove "common.h" in board file
> - Remove CFG_I2C_MVTWSI_BASE0 in include header file
> - Cleanup unecessary comments in include header file
> 
> Changes in v2:
> - Use node pointers already defined from armada-38x.dtsi in this board DTS
> - Remove extra compatible attributes in this board DTS
> - Remove unnecessary armada-385-thecus-n2350-u-boot.dtsi
> - Remove unnecessary check_board() function in board file
> - Remove unnecessary "default false" for DDR4 in arch/arm/mach-mvebu/Kconfig
> - Use "rootfs" as partition name for NAND partition
> - Various DTS naming convention correction
> 
>   arch/arm/dts/Makefile                    |   1 +
>   arch/arm/dts/armada-385-thecus-n2350.dts | 446 +++++++++++++++++++++++
>   arch/arm/mach-mvebu/Kconfig              |  11 +
>   board/thecus/n2350/MAINTAINERS           |   7 +
>   board/thecus/n2350/Makefile              |   6 +
>   board/thecus/n2350/n2350.c               | 126 +++++++
>   configs/n2350_defconfig                  |  93 +++++
>   include/configs/n2350.h                  |  56 +++
>   8 files changed, 746 insertions(+)
>   create mode 100644 arch/arm/dts/armada-385-thecus-n2350.dts
>   create mode 100644 board/thecus/n2350/MAINTAINERS
>   create mode 100644 board/thecus/n2350/Makefile
>   create mode 100644 board/thecus/n2350/n2350.c
>   create mode 100644 configs/n2350_defconfig
>   create mode 100644 include/configs/n2350.h
> 
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index 3ecd6a86e9..c5d1825a3b 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MVEBU) +=			\
>   	armada-385-atl-x530.dtb			\
>   	armada-385-atl-x530DP.dtb		\
>   	armada-385-db-88f6820-amc.dtb		\
> +	armada-385-thecus-n2350.dtb		\
>   	armada-385-turris-omnia.dtb		\
>   	armada-388-clearfog.dtb			\
>   	armada-388-gp.dtb			\
> diff --git a/arch/arm/dts/armada-385-thecus-n2350.dts b/arch/arm/dts/armada-385-thecus-n2350.dts
> new file mode 100644
> index 0000000000..fc29c4d25a
> --- /dev/null
> +++ b/arch/arm/dts/armada-385-thecus-n2350.dts
> @@ -0,0 +1,446 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Device Tree file for Thecus N2350 board
> + *
> + * Copyright (C) 2018-2023 Tony Dinh <mibodhi at gmail.com>
> + * Copyright (C) 2018 Manuel Jung <manuel.jung at hotmail.com>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include "armada-385.dtsi"
> +
> +/ {
> +	model = "Thecus N2350";
> +	compatible = "thecus,n2350", "marvell,armada385";
> +
> +	aliases {
> +		ethernet0 = &eth0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00000000 0x40000000>; /* 1GB */
> +	};
> +
> +	soc {
> +		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> +			  MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
> +			  MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
> +			  MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
> +			  MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
> +
> +	};
> +
> +	usb3_0_phy: usb3_0_phy {
> +		compatible = "usb-nop-xceiv";
> +		vcc-supply = <&usb3_0_power>;
> +	};
> +
> +	usb3_1_phy: usb3_1_phy {
> +		compatible = "usb-nop-xceiv";
> +		vcc-supply = <&usb3_1_power>;
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>;
> +		pinctrl-names = "default";
> +
> +		button at 1 {
> +			label = "Power Button";
> +			linux,code = <KEY_POWER>;
> +			gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		button at 2 {
> +			label = "Copy Button";
> +			linux,code = <KEY_COPY>;
> +			gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		button at 3 {
> +			label = "Reset Button";
> +			linux,code = <KEY_RESTART>;
> +			gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +		pinctrl-0 = <&pmx_sata1_white_led
> +				&pmx_sata1_red_led
> +				&pmx_sata2_white_led
> +				&pmx_sata2_red_led
> +				&pmx_sys_white_led
> +				&pmx_sys_red_led
> +				&pmx_pwr_blue_led
> +				&pmx_pwr_red_led
> +				&pmx_usb_white_led
> +				&pmx_usb_red_led>;
> +
> +		pinctrl-names = "default";
> +
> +		white_sata1 {
> +			label = "n2350:white:sata1";
> +			gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "ide-disk1";
> +		};
> +
> +		red_sata1 {
> +			label = "n2350:red:sata1";
> +			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		white-sata2 {
> +			label = "n2350:white:sata2";
> +			gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		red-sata2 {
> +			label = "n2350:red:sata2";
> +			gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		white-sys {
> +			label = "n2350:white:sys";
> +			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
> +			linux,default-trigger = "default-on";
> +		};
> +
> +		red-sys {
> +			label = "n2350:red:sys";
> +			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		blue-pwr {
> +			label = "n2350:blue:pwr";
> +			gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		red-pwr {
> +			label = "n2350:red:pwr";
> +			gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		white-usb {
> +			label = "n2350:white:usb";
> +			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		red-usb {
> +			label = "n2350:red:usb";
> +			gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
> +		};
> +	};
> +
> +	regulators {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		usb3_0_power: regulator at 1 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "USB3_0_Power";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		usb3_1_power: regulator at 2 {
> +			compatible = "regulator-fixed";
> +			reg = <1>;
> +			regulator-name = "USB3_1_Power";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			enable-active-high;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		reg_sata0: regulator at 3 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "pwr_en_sata0";
> +			regulator-min-microvolt = <12000000>;
> +			regulator-max-microvolt = <12000000>;
> +			enable-active-high;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		reg_5v_sata0: v5-sata0 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "v5.0-sata0";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			vin-supply = <&reg_sata0>;
> +		};
> +
> +		reg_12v_sata0: v12-sata0 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "v12.0-sata0";
> +			regulator-min-microvolt = <12000000>;
> +			regulator-max-microvolt = <12000000>;
> +			vin-supply = <&reg_sata0>;
> +		};
> +
> +		reg_sata1: regulator at 4 {
> +			regulator-name = "pwr_en_sata1";
> +			compatible = "regulator-fixed";
> +			regulator-min-microvolt = <12000000>;
> +			regulator-max-microvolt = <12000000>;
> +			enable-active-high;
> +			regulator-always-on;
> +			regulator-boot-on;
> +			gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
> +		};
> +
> +		reg_5v_sata1: v5-sata1 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "v5.0-sata1";
> +			regulator-min-microvolt = <5000000>;
> +			regulator-max-microvolt = <5000000>;
> +			vin-supply = <&reg_sata1>;
> +		};
> +
> +		reg_12v_sata1: v12-sata1 {
> +			compatible = "regulator-fixed";
> +			regulator-name = "v12.0-sata1";
> +			regulator-min-microvolt = <12000000>;
> +			regulator-max-microvolt = <12000000>;
> +			vin-supply = <&reg_sata1>;
> +		};
> +
> +	};
> +
> +	gpio-poweroff {
> +		compatible = "gpio-poweroff";
> +		pinctrl-0 = <&pmx_pwr_off>;
> +		pinctrl-names = "default";
> +		gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +};
> +
> +&ahci0 {
> +	status = "okay";
> +};
> +
> +&bm {
> +	status = "okay";
> +};
> +
> +&bm_bppi {
> +	status = "okay";
> +};
> +
> +&eth0 {
> +	status = "okay";
> +	phy = <&phy0>;
> +	phy-mode = "sgmii";
> +	buffer-manager = <&bm>;
> +	bm,pool-long = <0>;
> +	bm,pool-short = <1>;
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +	clock-frequency = <100000>;
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +	clock-frequency = <100000>;
> +};
> +
> +&mdio {
> +	phy0: ethernet-phy at 0 {
> +		reg = <1>;
> +	};
> +};
> +
> +&nand_controller {
> +	status = "okay";
> +
> +	nand at 0 {
> +		status = "okay";
> +		reg = <0>;
> +		label = "pxa3xx_nand-0";
> +		nand-rb = <0>;
> +		marvell,nand-keep-config;
> +		nand-on-flash-bbt;
> +		nand-ecc-strength = <4>;
> +		nand-ecc-step-size = <512>;
> +
> +		partitions {
> +			compatible = "fixed-partitions";
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			partition at 0 {
> +				label = "rootfs";
> +				reg = <0x00000000 0x20000000>;
> +			};
> +
> +		};
> +	};
> +};
> +
> +&pciec {
> +	status = "okay";
> +	/*
> +	 * The two PCIe units are accessible through
> +	 * standard PCIe slots on the board.
> +	 */
> +	pcie at 1,0 {
> +		/* Port 0, Lane 0 */
> +		status = "okay";
> +	};
> +	pcie at 2,0 {
> +		/* Port 1, Lane 0 */
> +		status = "okay";
> +	};
> +};
> +
> +&pinctrl {
> +	pinctrl-names = "default";
> +
> +	pmx_power_button: pmx-power-button {
> +		marvell,pins = "mpp49";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_copy_button: pmx-copy-button {
> +		marvell,pins = "mpp52";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_reset_button: pmx-reset-button {
> +		marvell,pins = "mpp50";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_sata1_white_led: pmx-sata1-white-led {
> +		marvell,pins = "mpp20";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_sata1_red_led: pmx-sata1-red-led {
> +		marvell,pins = "mpp46";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_sata2_white_led: pmx-sata2-white-led {
> +		marvell,pins = "mpp19";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_sata2_red_led: pmx-sata2-red-led {
> +		marvell,pins = "mpp47";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_sys_white_led: pmx-sys-white-led {
> +		marvell,pins = "mpp14";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_sys_red_led: pmx-sys-red-led {
> +		marvell,pins = "mpp15";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_buzzer: pmx-buzzer {
> +		marvell,pins = "mpp51";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_pwr_off: pmx-pwr-off {
> +		marvell,pins = "mpp54";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_pwr_blue_led: pmx-pwr-blue-led {
> +		marvell,pins = "mpp43";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_pwr_red_led: pmx-pwr-red-led {
> +		marvell,pins = "mpp18";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_usb_white_led: pmx-usb-white-led {
> +		marvell,pins = "mpp16";
> +		marvell,function = "gpio";
> +	};
> +
> +	pmx_usb_red_led: pmx-usb-red-led {
> +		marvell,pins = "mpp17";
> +		marvell,function = "gpio";
> +	};
> +};
> +
> +&sdhci {
> +	broken-cd;
> +	wp-inverted;
> +	bus-width = <8>;
> +	status = "okay";
> +	no-1-8-v;
> +};
> +
> +&spi1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&spi1_pins>;
> +	status = "okay";
> +
> +	/* spi: 4M Flash Macronix MX25L3205D */
> +	spi-flash at 0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "macronix,mx25l3205d", "jedec,spi-nor";
> +		reg = <0>;
> +
> +		spi-max-frequency = <108000000>;
> +		spi-cpha;
> +
> +		partition at 0 {
> +			label = "u-boot";
> +			reg = <0x00000000 0x00100000>;
> +		};
> +
> +		partition at 100000 {
> +			label = "u-boot-env";
> +			reg = <0x00100000 0x00010000>;
> +		};
> +	};
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&usb0 {
> +	status = "okay";
> +};
> +
> +&usb3_0 {
> +	status = "okay";
> +};
> +
> +&usb3_1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index 594e9a03d9..f829e40945 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -97,6 +97,9 @@ config 88F6820
>   config CUSTOMER_BOARD_SUPPORT
>   	bool
>   
> +config DDR4
> +	bool "Support Marvell DDR4 Training driver"
> +
>   choice
>   	prompt "Armada XP/375/38x/3700/7K/8K/Alleycat-5 board select"
>   	optional
> @@ -175,6 +178,11 @@ config TARGET_MAXBCM
>   	select BOARD_ECC_SUPPORT
>   	select MV78460
>   
> +config TARGET_N2350
> +	bool "Support Thecus N2350"
> +	select 88F6820
> +	select DDR4
> +
>   config TARGET_THEADORABLE
>   	bool "Support theadorable Armada XP"
>   	select BOARD_LATE_INIT if USB
> @@ -257,6 +265,7 @@ config SYS_BOARD
>   	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
>   	default "ds414" if TARGET_DS414
>   	default "maxbcm" if TARGET_MAXBCM
> +	default "n2350" if TARGET_N2350
>   	default "theadorable" if TARGET_THEADORABLE
>   	default "a38x" if TARGET_CONTROLCENTERDC
>   	default "x530" if TARGET_X530
> @@ -276,6 +285,7 @@ config SYS_CONFIG_NAME
>   	default "db-mv784mp-gp" if TARGET_DB_MV784MP_GP
>   	default "ds414" if TARGET_DS414
>   	default "maxbcm" if TARGET_MAXBCM
> +	default "n2350" if TARGET_N2350
>   	default "theadorable" if TARGET_THEADORABLE
>   	default "turris_omnia" if TARGET_TURRIS_OMNIA
>   	default "turris_mox" if TARGET_TURRIS_MOX
> @@ -298,6 +308,7 @@ config SYS_VENDOR
>   	default "solidrun" if TARGET_CLEARFOG
>   	default "kobol" if TARGET_HELIOS4
>   	default "Synology" if TARGET_DS414
> +	default "thecus" if TARGET_N2350
>   	default "CZ.NIC" if TARGET_TURRIS_OMNIA
>   	default "CZ.NIC" if TARGET_TURRIS_MOX
>   	default "gdsys" if TARGET_CONTROLCENTERDC
> diff --git a/board/thecus/n2350/MAINTAINERS b/board/thecus/n2350/MAINTAINERS
> new file mode 100644
> index 0000000000..2b8774f8fb
> --- /dev/null
> +++ b/board/thecus/n2350/MAINTAINERS
> @@ -0,0 +1,7 @@
> +N2350  BOARD
> +M:	Tony Dinh <mibodhi at gmail.com>
> +S:	Maintained
> +F:	arch/arm/dts/armada-385-thecus-n2350.dts
> +F:	board/thecus/n2350/
> +F:	include/configs/n2350.h
> +F:	configs/n2350_defconfig
> diff --git a/board/thecus/n2350/Makefile b/board/thecus/n2350/Makefile
> new file mode 100644
> index 0000000000..b220bb1925
> --- /dev/null
> +++ b/board/thecus/n2350/Makefile
> @@ -0,0 +1,6 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
> +#
> +
> +obj-y	:= n2350.o
> diff --git a/board/thecus/n2350/n2350.c b/board/thecus/n2350/n2350.c
> new file mode 100644
> index 0000000000..4cfdfba662
> --- /dev/null
> +++ b/board/thecus/n2350/n2350.c
> @@ -0,0 +1,126 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
> + *
> + */
> +
> +#include <i2c.h>
> +#include <miiphy.h>
> +#include <netdev.h>
> +#include <asm/io.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/soc.h>
> +#include <linux/bitops.h>
> +
> +#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
> +#include <../serdes/a38x/high_speed_env_spec.h>
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/*
> + * Those N2350_GPP_xx values and defines in board_serdes_map, and board_topology_map
> + * are taken from the Marvell U-Boot version "u-boot-a38x-2015T1_p18_Thecus"
> + */
> +
> +#define N2350_GPP_OUT_ENA_LOW	(~(BIT(20) | BIT(21) | BIT(24)))
> +#define N2350_GPP_OUT_ENA_MID	(~(BIT(12) | BIT(13) | BIT(16) | BIT(19) | BIT(22)))
> +#define N2350_GPP_OUT_VAL_LOW	0x1200000
> +#define N2350_GPP_OUT_VAL_MID	0x1001
> +#define N2350_GPP_POL_LOW	0x0
> +#define N2350_GPP_POL_MID	0x0
> +
> +static struct serdes_map board_serdes_map[] = {
> +	{ SGMII0, SERDES_SPEED_1_25_GBPS, SERDES_DEFAULT_MODE, 0, 0},
> +	{ SATA0,  SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
> +	{ SATA1,  SERDES_SPEED_3_GBPS, SERDES_DEFAULT_MODE, 0, 0},
> +	{ DEFAULT_SERDES, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
> +	{ USB3_HOST0, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
> +	{ USB3_HOST1, SERDES_SPEED_5_GBPS, SERDES_DEFAULT_MODE, 0, 0},
> +};
> +
> +int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
> +{
> +	*serdes_map_array = board_serdes_map;
> +	*count = ARRAY_SIZE(board_serdes_map);
> +	return 0;
> +}
> +
> +/*
> + * Define the DDR layout / topology here in the board file. This will
> + * be used by the DDR4 init code in the SPL U-Boot version to configure
> + * the DDR4 controller.
> + */
> +
> +static struct mv_ddr_topology_map board_topology_map = {
> +	DEBUG_LEVEL_ERROR,
> +	0x1, /* active interfaces */
> +	/* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
> +	{ { { {0x1, 0, 0, 0},
> +	      {0x1, 0, 0, 0},
> +	      {0x1, 0, 0, 0},
> +	      {0x1, 0, 0, 0},
> +	      {0x1, 0, 0, 0} },
> +	    SPEED_BIN_DDR_1866L,        /* speed_bin */
> +	    MV_DDR_DEV_WIDTH_16BIT,     /* memory_width - 16 bits */
> +	    MV_DDR_DIE_CAP_4GBIT,       /* mem_size - N2350 board has 2x512MB DRAM banks */
> +	    MV_DDR_FREQ_800,            /* frequency */
> +	    0, 0,			/* cas_wl cas_l */
> +	    MV_DDR_TEMP_LOW,		/* temperature */
> +	    MV_DDR_TIM_DEFAULT} },	/* timing */
> +	BUS_MASK_32BIT,			/* Busses mask */
> +	MV_DDR_CFG_DEFAULT,		/* ddr configuration data source */
> +	NOT_COMBINED,			/* ddr twin-die combined */
> +	{ {0} },			/* raw spd data */
> +	{0}				/* timing parameters */
> +};
> +
> +struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
> +{
> +	/* Return the board topology as defined in the board code */
> +	return &board_topology_map;
> +}
> +
> +int board_early_init_f(void)
> +{
> +	/* Those MPP values are taken from the Marvell U-Boot version
> +	 * "u-boot-a38x-2015T1_p18_Thecus"
> +	 */
> +
> +	/* Configure MPP */
> +	writel(0x50111111, MVEBU_MPP_BASE + 0x00);	/* MPP0_7 */
> +	writel(0x00555555, MVEBU_MPP_BASE + 0x04);	/* MPP8_15 */
> +	writel(0x55000000, MVEBU_MPP_BASE + 0x08);	/* MPP16_23 */
> +	writel(0x05050050, MVEBU_MPP_BASE + 0x0c);	/* MPP24_31 */
> +	writel(0x05555555, MVEBU_MPP_BASE + 0x10);	/* MPP32_39 */
> +	writel(0x00000565, MVEBU_MPP_BASE + 0x14);	/* MPP40_47 */
> +	writel(0x00000000, MVEBU_MPP_BASE + 0x18);	/* MPP48_55 */
> +	writel(0x00004444, MVEBU_MPP_BASE + 0x1c);	/* MPP56_63 */
> +
> +	/* Set GPP Out value */
> +	writel(N2350_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
> +	writel(N2350_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
> +
> +	/* Set GPP Polarity */
> +	writel(N2350_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
> +	writel(N2350_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
> +
> +	/* Set GPP Out Enable */
> +	writel(N2350_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
> +	writel(N2350_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
> +
> +	return 0;
> +}
> +
> +int board_init(void)
> +{
> +	/* Address of boot parameters */
> +	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
> +
> +	return 0;
> +}
> +
> +int board_eth_init(struct bd_info *bis)
> +{
> +	cpu_eth_init(bis); /* Built in controller(s) come first */
> +	return pci_eth_init(bis);
> +}
> diff --git a/configs/n2350_defconfig b/configs/n2350_defconfig
> new file mode 100644
> index 0000000000..dcb2c96791
> --- /dev/null
> +++ b/configs/n2350_defconfig
> @@ -0,0 +1,93 @@
> +CONFIG_ARM=y
> +CONFIG_ARCH_CPU_INIT=y
> +CONFIG_SYS_THUMB_BUILD=y
> +CONFIG_ARCH_MVEBU=y
> +CONFIG_SUPPORT_PASSING_ATAGS=y
> +CONFIG_CMDLINE_TAG=y
> +CONFIG_INITRD_TAG=y
> +CONFIG_TEXT_BASE=0x00800000
> +CONFIG_SPL_LIBCOMMON_SUPPORT=y
> +CONFIG_SPL_LIBGENERIC_SUPPORT=y
> +CONFIG_NR_DRAM_BANKS=2
> +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
> +CONFIG_TARGET_N2350=y
> +CONFIG_ENV_SIZE=0x10000
> +CONFIG_ENV_OFFSET=0x100000
> +CONFIG_ENV_SECT_SIZE=0x10000
> +CONFIG_DEFAULT_DEVICE_TREE="armada-385-thecus-n2350"
> +CONFIG_SPL_TEXT_BASE=0x40000030
> +CONFIG_SYS_PROMPT="N2350 > "
> +CONFIG_SPL_SERIAL=y
> +CONFIG_SPL_STACK=0x4002c000
> +CONFIG_SPL=y
> +CONFIG_DEBUG_UART_BASE=0xf1012000
> +CONFIG_DEBUG_UART_CLOCK=250000000
> +CONFIG_IDENT_STRING="\nThecus N2350"
> +CONFIG_SYS_LOAD_ADDR=0x800000
> +CONFIG_ENV_ADDR=0x100000
> +CONFIG_DEBUG_UART=y
> +CONFIG_AHCI=y
> +CONFIG_DISTRO_DEFAULTS=y
> +CONFIG_BOOTDELAY=10
> +CONFIG_USE_PREBOOT=y
> +CONFIG_SYS_CONSOLE_INFO_QUIET=y
> +# CONFIG_DISPLAY_BOARDINFO is not set
> +CONFIG_DISPLAY_BOARDINFO_LATE=y
> +CONFIG_SPL_MAX_SIZE=0x22fd0
> +CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
> +CONFIG_SPL_BSS_START_ADDR=0x40023000
> +CONFIG_SPL_BSS_MAX_SIZE=0x4000
> +CONFIG_SPL_SYS_MALLOC_SIMPLE=y
> +# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
> +CONFIG_SPL_I2C=y
> +CONFIG_SYS_MAXARGS=32
> +CONFIG_CMD_GPIO=y
> +CONFIG_CMD_GPIO_READ=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_PCI=y
> +CONFIG_CMD_SPI=y
> +CONFIG_CMD_USB=y
> +CONFIG_CMD_TFTPPUT=y
> +CONFIG_CMD_SNTP=y
> +CONFIG_CMD_DNS=y
> +CONFIG_CMD_CACHE=y
> +CONFIG_CMD_TIME=y
> +CONFIG_CMD_MTDPARTS=y
> +CONFIG_MTDPARTS_DEFAULT="mtdparts=pxa3xx_nand-0:-(rootfs);spi1.0:1M(u-boot),64K at 1M(u-boot-env),-(data)"
> +CONFIG_ENV_OVERWRITE=y
> +CONFIG_SYS_RELOC_GD_ENV_ADDR=y
> +CONFIG_VERSION_VARIABLE=y
> +CONFIG_ARP_TIMEOUT=200
> +CONFIG_NET_RETRY_COUNT=50
> +CONFIG_NET_RANDOM_ETHADDR=y
> +CONFIG_NETCONSOLE=y
> +CONFIG_SPL_OF_TRANSLATE=y
> +CONFIG_AHCI_MVEBU=y
> +CONFIG_LBA48=y
> +CONFIG_SYS_64BIT_LBA=y
> +CONFIG_DM_I2C=y
> +CONFIG_SYS_I2C_MVTWSI=y
> +CONFIG_MTD=y
> +CONFIG_SF_DEFAULT_SPEED=50000000
> +CONFIG_SPI_FLASH_MACRONIX=y
> +CONFIG_SPI_FLASH_STMICRO=y
> +CONFIG_PHY_MARVELL=y
> +CONFIG_PHY_GIGE=y
> +CONFIG_MVNETA=y
> +CONFIG_MII=y
> +CONFIG_MVMDIO=y
> +CONFIG_PCI=y
> +CONFIG_PCI_MVEBU=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCTRL_ARMADA_38X=y
> +CONFIG_DM_RTC=y
> +CONFIG_RTC_ARMADA38X=y
> +CONFIG_SCSI=y
> +CONFIG_SPL_DEBUG_UART_BASE=0xd0012000
> +CONFIG_DEBUG_UART_SHIFT=2
> +CONFIG_SYS_NS16550=y
> +CONFIG_KIRKWOOD_SPI=y
> +CONFIG_USB=y
> +CONFIG_USB_XHCI_HCD=y
> +CONFIG_USB_EHCI_HCD=y
> diff --git a/include/configs/n2350.h b/include/configs/n2350.h
> new file mode 100644
> index 0000000000..92b2270236
> --- /dev/null
> +++ b/include/configs/n2350.h
> @@ -0,0 +1,56 @@
> +/* SPDX-License-Identifier: GPL-2.0+ */
> +/*
> + * Copyright (C) 2023 Tony Dinh <mibodhi at gmail.com>
> + *
> + */
> +
> +#ifndef _CONFIG_N2350_H
> +#define _CONFIG_N2350_H
> +
> +#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */
> +
> +/* Keep device tree and initrd in lower memory so the kernel can access them */
> +#define RELOCATION_LIMITS_ENV_SETTINGS  \
> +	"fdt_high=0x10000000\0"         \
> +	"initrd_high=0x10000000\0"
> +
> +/*
> + * mv-common.h should be defined after CMD configs since it used them
> + * to enable certain macros
> + */
> +#include "mv-common.h"
> +
> +/* Include the common distro boot environment */
> +#ifndef CONFIG_SPL_BUILD
> +
> +#define BOOT_TARGET_DEVICES(func) \
> +	func(SCSI, scsi, 0) \
> +	func(USB, usb, 0) \
> +	func(PXE, pxe, na) \
> +	func(DHCP, dhcp, na)
> +
> +#define KERNEL_ADDR_R	__stringify(0x1000000)
> +#define FDT_ADDR_R	__stringify(0x2000000)
> +#define RAMDISK_ADDR_R	__stringify(0x2200000)
> +#define SCRIPT_ADDR_R	__stringify(0x1800000)
> +#define PXEFILE_ADDR_R	__stringify(0x1900000)
> +
> +#define LOAD_ADDRESS_ENV_SETTINGS \
> +	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
> +	"fdt_addr_r=" FDT_ADDR_R "\0" \
> +	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
> +	"scriptaddr=" SCRIPT_ADDR_R "\0" \
> +	"pxefile_addr_r=" PXEFILE_ADDR_R "\0"
> +
> +#include <config_distro_bootcmd.h>
> +
> +#define CFG_EXTRA_ENV_SETTINGS \
> +	RELOCATION_LIMITS_ENV_SETTINGS \
> +	LOAD_ADDRESS_ENV_SETTINGS \
> +	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
> +	"console=ttyS0,115200\0" \
> +	BOOTENV
> +
> +#endif /* CONFIG_SPL_BUILD */
> +
> +#endif /* _CONFIG_N2350_H */

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list