[PATCH V2 8/9] arm64: dts: rockchip: add gpio-ranges property to gpio nodes

[Chris Morgan]

From: Chris Morgan <macromorgan at hotmail.com>

Add gpio-ranges property to GPIO nodes so that the bank ID can
be correctly derived for each GPIO bank.

Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
---
 arch/arm/dts/rk356x.dtsi | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
index 5706c3e24f..6492ace0de 100644
--- a/arch/arm/dts/rk356x.dtsi
+++ b/arch/arm/dts/rk356x.dtsi
@@ -1806,6 +1806,7 @@
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 0 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1817,6 +1818,7 @@
 			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 32 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1828,6 +1830,7 @@
 			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 64 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1839,6 +1842,7 @@
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 96 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
@@ -1850,6 +1854,7 @@
 			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
 			gpio-controller;
+			gpio-ranges = <&pinctrl 0 128 32>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-- 
2.34.1