[PATCH v2 5/6] rockchip: evb-rk3568: Update defconfig

[Jonas Karlman]

Update defconfig for evb-rk3568 with new defaults.

Remove the SPL_ROCKCHIP_BACK_TO_BROM=y option, SPL is expected to load
next stage from a FIT image and then jump to next stage not back to
BootRom.

Extend SPL_MAX_SIZE to 0x40000, SPL is loaded to 0x0 and TF-A is loaded
to 0x40000, use the space in between as SPL_MAX_SIZE.

Add CONFIG_SPL_FIT_SIGNATURE=y to let SPL verify an auto generated hash
of FIT images. This help indicate if there is an issue loading any of
the images to memory.

Add CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y to prevent vendor TF-A from
crashing in some cases when fdt_addr is provided as platform param.

Filter out assigned-clock props with CONFIG_OF_SPL_REMOVE_PROPS,
U-Boot proper will read and configure assigned-clock props.

Resync with savedefconfig.

Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
---
v2:
- new patch

 configs/evb-rk3568_defconfig | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

diff --git a/configs/evb-rk3568_defconfig b/configs/evb-rk3568_defconfig
index 7374ee42fb19..e5b69b50b7ab 100644
--- a/configs/evb-rk3568_defconfig
+++ b/configs/evb-rk3568_defconfig
@@ -6,42 +6,43 @@ CONFIG_TEXT_BASE=0x00a00000
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_NR_DRAM_BANKS=2
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb"
 CONFIG_ROCKCHIP_RK3568=y
-CONFIG_SPL_ROCKCHIP_BACK_TO_BROM=y
 CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
-CONFIG_SPL_MMC=y
 CONFIG_SPL_SERIAL=y
 CONFIG_SPL_STACK_R_ADDR=0x600000
 CONFIG_TARGET_EVB_RK3568=y
+CONFIG_SPL_STACK=0x400000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_DISPLAY_BOARDINFO_LATE=y
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x4000000
 CONFIG_SPL_BSS_MAX_SIZE=0x4000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x400000
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_SPL_DOS_PARTITION is not set
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SPL_REGMAP=y
 CONFIG_SPL_SYSCON=y
-- 
2.39.1