[PATCH 2/3] rockchip: Require an external TPL binary when TPL is missing

Jonas Karlman jonas at kwiboo.se
Tue Feb 14 11:52:37 CET 2023


Hi Kever,
On 2023-02-14 04:45, Kever Yang wrote:
> Hi Jonas,
> 
> On 2023/2/6 20:51, Jonas Karlman wrote:
>> Hi Quentin,
>> On 2023-02-06 12:26, Quentin Schulz wrote:
>>> Hi Jonas,
>>>
>>> On 2/5/23 21:21, Jonas Karlman wrote:
>>>> Rockchip SoCs typically use U-Boot TPL to initialize DRAM, then jumps
>>>> back to boot-rom to load the next stage of the boot flow, U-Boot SPL.
>>>>
>>>> For RK356x there is currently no support to initialize DRAM using U-Boot
>>>> TPL and instead an external TPL binary must be used to generate a
>>>> working u-boot-rockchip.bin image.
>>>>
>>>> Use the new external-tpl entry unless CONFIG_TPL=y to indicate that an
>>>> external TPL binary must be provided to generate a working firmware.
>>>>
>>>> Signed-off-by: Jonas Karlman <jonas at kwiboo.se>
>>>> ---
>>>>    Makefile                          |  1 +
>>>>    arch/arm/dts/rockchip-u-boot.dtsi | 16 ++++++++++++----
>>>>    tools/binman/missing-blob-help    |  5 +++++
>>>>    3 files changed, 18 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/Makefile b/Makefile
>>>> index 7eaf45496c1c..7e9272be937f 100644
>>>> --- a/Makefile
>>>> +++ b/Makefile
>>>> @@ -1332,6 +1332,7 @@ cmd_binman = $(srctree)/tools/binman/binman $(if $(BINMAN_DEBUG),-D) \
>>>>    		-a opensbi-path=${OPENSBI} \
>>>>    		-a default-dt=$(default_dt) \
>>>>    		-a scp-path=$(SCP) \
>>>> +		-a external-tpl-path=$(EXTERNAL_TPL) \
>>>>    		-a spl-bss-pad=$(if $(CONFIG_SPL_SEPARATE_BSS),,1) \
>>>>    		-a tpl-bss-pad=$(if $(CONFIG_TPL_SEPARATE_BSS),,1) \
>>>>    		-a spl-dtb=$(CONFIG_SPL_OF_REAL) \
>>>> diff --git a/arch/arm/dts/rockchip-u-boot.dtsi b/arch/arm/dts/rockchip-u-boot.dtsi
>>>> index 6c662a72d4f9..bc3bc9bc3e37 100644
>>>> --- a/arch/arm/dts/rockchip-u-boot.dtsi
>>>> +++ b/arch/arm/dts/rockchip-u-boot.dtsi
>>>> @@ -20,12 +20,16 @@
>>>>    		mkimage {
>>>>    			filename = "idbloader.img";
>>>>    			args = "-n", CONFIG_SYS_SOC, "-T", "rksd";
>>>> -#ifdef CONFIG_TPL
>>>>    			multiple-data-files;
>>>>    
>>>> +#ifdef CONFIG_TPL
>>>>    			u-boot-tpl {
>>>> -			};
>>>> +#else
>>>> +			external-tpl {
>>>> +				filename = "ddr.bin";
>>>> +				missing-msg = "external-tpl-rockchip";
>>>>    #endif
>>>> +			};
>>> NACK. This forces the use of a TPL (either built by U-Boot or external)
>>> which is not always the case. There are still boards without a TPL which
>>> work perfectly fine (at least I would hope so :) ).
>>>
>>> Basically there are three possible cases:
>>> SPL
>>> TPL+SPL
>>> TPL(external blob)+SPL
>>>
>>> Here you remove the ability to have SPL only.
>>>
>>> Hence why I suggested we add a new Kconfig option for EXTERNAL_TPL, not
>>> for the path but to explicit this third possibility.
>> Thanks for the feedback, I will add a Kconfig option to make this explicit.
>> We could also add the optional prop in the external-tpl node to only include
>> the external TPL when it is provided. This will require also fixing the
>> missing/optional handling for the mkimage entry.
> 
> Could you help to send the new patchset with this update?
> 

I have now send out a v2 of this, see [1].

[1] https://patchwork.ozlabs.org/project/uboot/cover/20230214103300.690542-1-jonas@kwiboo.se/

Regards,
Jonas

> 
> Thanks,
> 
> - Kever
> 



More information about the U-Boot mailing list