[PATCH 2/2] xilinx: Enable SMC command for arm64 targets

[Michal Simek]

SMC command is very useful for TF-A testing or issuing commands which are
not covered by any driver. Strongly recommend to disable this command on
any product unless it is required.

Signed-off-by: Michal Simek <michal.simek at amd.com>
---

 configs/xilinx_versal_net_virt_defconfig | 1 +
 configs/xilinx_versal_virt_defconfig     | 1 +
 configs/xilinx_zynqmp_virt_defconfig     | 1 +
 3 files changed, 3 insertions(+)

diff --git a/configs/xilinx_versal_net_virt_defconfig b/configs/xilinx_versal_net_virt_defconfig
index 729c6ad4503b..e3b0cb29c80d 100644
--- a/configs/xilinx_versal_net_virt_defconfig
+++ b/configs/xilinx_versal_net_virt_defconfig
@@ -47,6 +47,7 @@ CONFIG_CMD_CACHE=y
 CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_SQUASHFS=y
 CONFIG_CMD_MTDPARTS=y
diff --git a/configs/xilinx_versal_virt_defconfig b/configs/xilinx_versal_virt_defconfig
index 053af57b6b1c..451107479a85 100644
--- a/configs/xilinx_versal_virt_defconfig
+++ b/configs/xilinx_versal_virt_defconfig
@@ -51,6 +51,7 @@ CONFIG_CMD_EFIDEBUG=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_RNG=y
 CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_SQUASHFS=y
 CONFIG_CMD_MTDPARTS=y
diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
index c40490a9f801..f7364aae7099 100644
--- a/configs/xilinx_zynqmp_virt_defconfig
+++ b/configs/xilinx_zynqmp_virt_defconfig
@@ -91,6 +91,7 @@ CONFIG_CMD_TIME=y
 CONFIG_CMD_GETTIME=y
 CONFIG_CMD_TIMER=y
 CONFIG_CMD_REGULATOR=y
+CONFIG_CMD_SMC=y
 CONFIG_CMD_TPM=y
 CONFIG_CMD_EXT4_WRITE=y
 CONFIG_CMD_SQUASHFS=y
-- 
2.36.1