[PATCH 5/5] board: freescale: ls1088a: remove code under !CONFIG_DM_ETH
Ioana Ciornei
ioana.ciornei at nxp.com
Wed Feb 15 16:31:19 CET 2023
Now that DM_ETH is enabled by default, there is no point in keeping the
non-DM_ETH code which initialized the ethernet interfaces.
Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
board/freescale/ls1088a/eth_ls1088aqds.c | 739 +----------------------
board/freescale/ls1088a/eth_ls1088ardb.c | 93 ---
board/freescale/ls1088a/ls1088a.c | 2 +-
3 files changed, 4 insertions(+), 830 deletions(-)
diff --git a/board/freescale/ls1088a/eth_ls1088aqds.c b/board/freescale/ls1088a/eth_ls1088aqds.c
index 8fe643f70b96..f62f5fd27450 100644
--- a/board/freescale/ls1088a/eth_ls1088aqds.c
+++ b/board/freescale/ls1088a/eth_ls1088aqds.c
@@ -3,742 +3,9 @@
* Copyright 2017 NXP
*/
-#include <common.h>
-#include <command.h>
-#include <env.h>
-#include <log.h>
-#include <net.h>
-#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/fsl_serdes.h>
-#include <hwconfig.h>
-#include <fsl_mdio.h>
-#include <malloc.h>
-#include <phy.h>
-#include <fm_eth.h>
-#include <i2c.h>
-#include <miiphy.h>
#include <fsl-mc/fsl_mc.h>
-#include <fsl-mc/ldpaa_wriop.h>
-#include <linux/delay.h>
-
-#include "../common/qixis.h"
-
-#include "ls1088a_qixis.h"
-
-#ifndef CONFIG_DM_ETH
-#ifdef CONFIG_FSL_MC_ENET
-
-#define SFP_TX 0
-
- /* - In LS1088A A there are only 16 SERDES lanes, spread across 2 SERDES banks.
- * Bank 1 -> Lanes A, B, C, D,
- * Bank 2 -> Lanes A,B, C, D,
- */
-
- /* Mapping of 8 SERDES lanes to LS1088A QDS board slots. A value of '0' here
- * means that the mapping must be determined dynamically, or that the lane
- * maps to something other than a board slot.
- */
-
-static u8 lane_to_slot_fsm1[] = {
- 0, 0, 0, 0, 0, 0, 0, 0
-};
-
-/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
- * housed.
- */
-
-static int xqsgii_riser_phy_addr[] = {
- XQSGMII_CARD_PHY1_PORT0_ADDR,
- XQSGMII_CARD_PHY2_PORT0_ADDR,
- XQSGMII_CARD_PHY3_PORT0_ADDR,
- XQSGMII_CARD_PHY4_PORT0_ADDR,
- XQSGMII_CARD_PHY3_PORT2_ADDR,
- XQSGMII_CARD_PHY1_PORT2_ADDR,
- XQSGMII_CARD_PHY4_PORT2_ADDR,
- XQSGMII_CARD_PHY2_PORT2_ADDR,
-};
-
-static int sgmii_riser_phy_addr[] = {
- SGMII_CARD_PORT1_PHY_ADDR,
- SGMII_CARD_PORT2_PHY_ADDR,
- SGMII_CARD_PORT3_PHY_ADDR,
- SGMII_CARD_PORT4_PHY_ADDR,
-};
-
-/* Slot2 does not have EMI connections */
-#define EMI_NONE 0xFF
-#define EMI1_RGMII1 0
-#define EMI1_RGMII2 1
-#define EMI1_SLOT1 2
-
-static const char * const mdio_names[] = {
- "LS1088A_QDS_MDIO0",
- "LS1088A_QDS_MDIO1",
- "LS1088A_QDS_MDIO2",
- DEFAULT_WRIOP_MDIO2_NAME,
-};
-
-struct ls1088a_qds_mdio {
- u8 muxval;
- struct mii_dev *realbus;
-};
-
-struct reg_pair {
- uint addr;
- u8 *val;
-};
-
-static void sgmii_configure_repeater(int dpmac)
-{
- struct mii_dev *bus;
- uint8_t a = 0xf;
- int i, j, k, ret;
- unsigned short value;
- const char *dev = "LS1088A_QDS_MDIO2";
- int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
- int i2c_phy_addr = 0;
- int phy_addr = 0;
-
- uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
- uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
- uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
- uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
-
- u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
- struct reg_pair reg_pair[10] = {
- {6, ®_val[0]}, {4, ®_val[1]},
- {8, ®_val[2]}, {0xf, NULL},
- {0x11, NULL}, {0x16, NULL},
- {0x18, NULL}, {0x23, ®_val[3]},
- {0x2d, ®_val[4]}, {4, ®_val[5]},
- };
-#if CONFIG_IS_ENABLED(DM_I2C)
- struct udevice *udev;
-#endif
-
- /* Set I2c to Slot 1 */
-#if !CONFIG_IS_ENABLED(DM_I2C)
- ret = i2c_write(0x77, 0, 0, &a, 1);
-#else
- ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
- if (!ret)
- ret = dm_i2c_write(udev, 0, &a, 1);
-#endif
- if (ret)
- goto error;
-
- switch (dpmac) {
- case 1:
- i2c_phy_addr = i2c_addr[1];
- phy_addr = 4;
- break;
- case 2:
- i2c_phy_addr = i2c_addr[0];
- phy_addr = 0;
- break;
- case 3:
- i2c_phy_addr = i2c_addr[3];
- phy_addr = 0xc;
- break;
- case 7:
- i2c_phy_addr = i2c_addr[2];
- phy_addr = 8;
- break;
- }
-
- /* Check the PHY status */
- ret = miiphy_set_current_dev(dev);
- if (ret > 0)
- goto error;
-
- bus = mdio_get_current_dev();
- debug("Reading from bus %s\n", bus->name);
-
- ret = miiphy_write(dev, phy_addr, 0x1f, 3);
- if (ret > 0)
- goto error;
-
- mdelay(10);
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- if (ret > 0)
- goto error;
-
- mdelay(10);
-
- if ((value & 0xfff) == 0x401) {
- miiphy_write(dev, phy_addr, 0x1f, 0);
- printf("DPMAC %d:PHY is ..... Configured\n", dpmac);
- return;
- }
-
-#if CONFIG_IS_ENABLED(DM_I2C)
- i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
-#endif
-
- for (i = 0; i < 4; i++) {
- for (j = 0; j < 4; j++) {
- reg_pair[3].val = &ch_a_eq[i];
- reg_pair[4].val = &ch_a_ctl2[j];
- reg_pair[5].val = &ch_b_eq[i];
- reg_pair[6].val = &ch_b_ctl2[j];
- for (k = 0; k < 10; k++) {
-#if !CONFIG_IS_ENABLED(DM_I2C)
- ret = i2c_write(i2c_phy_addr,
- reg_pair[k].addr,
- 1, reg_pair[k].val, 1);
-#else
- ret = i2c_get_chip_for_busnum(0,
- i2c_phy_addr,
- 1, &udev);
- if (!ret)
- ret = dm_i2c_write(udev,
- reg_pair[k].addr,
- reg_pair[k].val, 1);
-#endif
- if (ret)
- goto error;
- }
-
- mdelay(100);
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- if (ret > 0)
- goto error;
-
- mdelay(100);
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- if (ret > 0)
- goto error;
-
- if ((value & 0xfff) == 0x401) {
- printf("DPMAC %d :PHY is configured ",
- dpmac);
- printf("after setting repeater 0x%x\n",
- value);
- i = 5;
- j = 5;
- } else {
- printf("DPMAC %d :PHY is failed to ",
- dpmac);
- printf("configure the repeater 0x%x\n", value);
- }
- }
- }
- miiphy_write(dev, phy_addr, 0x1f, 0);
-error:
- if (ret)
- printf("DPMAC %d ..... FAILED to configure PHY\n", dpmac);
- return;
-}
-
-static void qsgmii_configure_repeater(int dpmac)
-{
- uint8_t a = 0xf;
- int i, j, k;
- int i2c_phy_addr = 0;
- int phy_addr = 0;
- int i2c_addr[] = {0x58, 0x59, 0x5a, 0x5b};
-
- uint8_t ch_a_eq[] = {0x1, 0x2, 0x3, 0x7};
- uint8_t ch_a_ctl2[] = {0x81, 0x82, 0x83, 0x84};
- uint8_t ch_b_eq[] = {0x1, 0x2, 0x3, 0x7};
- uint8_t ch_b_ctl2[] = {0x81, 0x82, 0x83, 0x84};
-
- u8 reg_val[6] = {0x18, 0x38, 0x4, 0x14, 0xb5, 0x20};
- struct reg_pair reg_pair[10] = {
- {6, ®_val[0]}, {4, ®_val[1]},
- {8, ®_val[2]}, {0xf, NULL},
- {0x11, NULL}, {0x16, NULL},
- {0x18, NULL}, {0x23, ®_val[3]},
- {0x2d, ®_val[4]}, {4, ®_val[5]},
- };
-
- const char *dev = mdio_names[EMI1_SLOT1];
- int ret = 0;
- unsigned short value;
-#if CONFIG_IS_ENABLED(DM_I2C)
- struct udevice *udev;
-#endif
-
- /* Set I2c to Slot 1 */
-#if !CONFIG_IS_ENABLED(DM_I2C)
- ret = i2c_write(0x77, 0, 0, &a, 1);
-#else
- ret = i2c_get_chip_for_busnum(0, 0x77, 1, &udev);
- if (!ret)
- ret = dm_i2c_write(udev, 0, &a, 1);
-#endif
- if (ret)
- goto error;
-
- switch (dpmac) {
- case 7:
- case 8:
- case 9:
- case 10:
- i2c_phy_addr = i2c_addr[2];
- phy_addr = 8;
- break;
-
- case 3:
- case 4:
- case 5:
- case 6:
- i2c_phy_addr = i2c_addr[3];
- phy_addr = 0xc;
- break;
- }
-
- /* Check the PHY status */
- ret = miiphy_set_current_dev(dev);
- ret = miiphy_write(dev, phy_addr, 0x1f, 3);
- mdelay(10);
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- mdelay(10);
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- mdelay(10);
- if ((value & 0xf) == 0xf) {
- miiphy_write(dev, phy_addr, 0x1f, 0);
- printf("DPMAC %d :PHY is ..... Configured\n", dpmac);
- return;
- }
-
-#if CONFIG_IS_ENABLED(DM_I2C)
- i2c_get_chip_for_busnum(0, i2c_phy_addr, 1, &udev);
-#endif
-
- for (i = 0; i < 4; i++) {
- for (j = 0; j < 4; j++) {
- reg_pair[3].val = &ch_a_eq[i];
- reg_pair[4].val = &ch_a_ctl2[j];
- reg_pair[5].val = &ch_b_eq[i];
- reg_pair[6].val = &ch_b_ctl2[j];
-
- for (k = 0; k < 10; k++) {
-#if !CONFIG_IS_ENABLED(DM_I2C)
- ret = i2c_write(i2c_phy_addr,
- reg_pair[k].addr,
- 1, reg_pair[k].val, 1);
-#else
- ret = i2c_get_chip_for_busnum(0,
- i2c_addr[dpmac],
- 1, &udev);
- if (!ret)
- ret = dm_i2c_write(udev,
- reg_pair[k].addr,
- reg_pair[k].val, 1);
-#endif
- if (ret)
- goto error;
- }
-
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- if (ret > 0)
- goto error;
- mdelay(1);
- ret = miiphy_read(dev, phy_addr, 0x11, &value);
- if (ret > 0)
- goto error;
- mdelay(10);
- if ((value & 0xf) == 0xf) {
- miiphy_write(dev, phy_addr, 0x1f, 0);
- printf("DPMAC %d :PHY is ..... Configured\n",
- dpmac);
- return;
- }
- }
- }
-error:
- printf("DPMAC %d :PHY ..... FAILED to configure PHY\n", dpmac);
- return;
-}
-
-static const char *ls1088a_qds_mdio_name_for_muxval(u8 muxval)
-{
- return mdio_names[muxval];
-}
-
-struct mii_dev *mii_dev_for_muxval(u8 muxval)
-{
- struct mii_dev *bus;
- const char *name = ls1088a_qds_mdio_name_for_muxval(muxval);
-
- if (!name) {
- printf("No bus for muxval %x\n", muxval);
- return NULL;
- }
-
- bus = miiphy_get_dev_by_name(name);
-
- if (!bus) {
- printf("No bus by name %s\n", name);
- return NULL;
- }
-
- return bus;
-}
-
-static void ls1088a_qds_enable_SFP_TX(u8 muxval)
-{
- u8 brdcfg9;
-
- brdcfg9 = QIXIS_READ(brdcfg[9]);
- brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
- brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
- QIXIS_WRITE(brdcfg[9], brdcfg9);
-}
-
-static void ls1088a_qds_mux_mdio(u8 muxval)
-{
- u8 brdcfg4;
-
- if (muxval <= 5) {
- brdcfg4 = QIXIS_READ(brdcfg[4]);
- brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
- brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
- QIXIS_WRITE(brdcfg[4], brdcfg4);
- }
-}
-
-static int ls1088a_qds_mdio_read(struct mii_dev *bus, int addr,
- int devad, int regnum)
-{
- struct ls1088a_qds_mdio *priv = bus->priv;
-
- ls1088a_qds_mux_mdio(priv->muxval);
-
- return priv->realbus->read(priv->realbus, addr, devad, regnum);
-}
-
-static int ls1088a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
- int regnum, u16 value)
-{
- struct ls1088a_qds_mdio *priv = bus->priv;
-
- ls1088a_qds_mux_mdio(priv->muxval);
-
- return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
-}
-
-static int ls1088a_qds_mdio_reset(struct mii_dev *bus)
-{
- struct ls1088a_qds_mdio *priv = bus->priv;
-
- return priv->realbus->reset(priv->realbus);
-}
-
-static int ls1088a_qds_mdio_init(char *realbusname, u8 muxval)
-{
- struct ls1088a_qds_mdio *pmdio;
- struct mii_dev *bus = mdio_alloc();
-
- if (!bus) {
- printf("Failed to allocate ls1088a_qds MDIO bus\n");
- return -1;
- }
-
- pmdio = malloc(sizeof(*pmdio));
- if (!pmdio) {
- printf("Failed to allocate ls1088a_qds private data\n");
- free(bus);
- return -1;
- }
-
- bus->read = ls1088a_qds_mdio_read;
- bus->write = ls1088a_qds_mdio_write;
- bus->reset = ls1088a_qds_mdio_reset;
- sprintf(bus->name, ls1088a_qds_mdio_name_for_muxval(muxval));
-
- pmdio->realbus = miiphy_get_dev_by_name(realbusname);
-
- if (!pmdio->realbus) {
- printf("No bus with name %s\n", realbusname);
- free(bus);
- free(pmdio);
- return -1;
- }
-
- pmdio->muxval = muxval;
- bus->priv = pmdio;
-
- return mdio_register(bus);
-}
-
-/*
- * Initialize the dpmac_info array.
- *
- */
-static void initialize_dpmac_to_slot(void)
-{
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
- u32 serdes1_prtcl, cfg;
-
- cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
- FSL_CHASSIS3_SRDS1_PRTCL_MASK;
- cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
- serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
- switch (serdes1_prtcl) {
- case 0x12:
- printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
- serdes1_prtcl);
- lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
- break;
- case 0x15:
- case 0x1D:
- printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
- serdes1_prtcl);
- lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[2] = EMI_NONE;
- lane_to_slot_fsm1[3] = EMI_NONE;
- break;
- case 0x1E:
- printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
- serdes1_prtcl);
- lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[1] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[3] = EMI_NONE;
- break;
- case 0x3A:
- printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
- serdes1_prtcl);
- lane_to_slot_fsm1[0] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[1] = EMI_NONE;
- lane_to_slot_fsm1[2] = EMI1_SLOT1 - 1;
- lane_to_slot_fsm1[3] = EMI1_SLOT1 - 1;
- break;
-
- default:
- printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
- __func__, serdes1_prtcl);
- break;
- }
-}
-
-void ls1088a_handle_phy_interface_sgmii(int dpmac_id)
-{
- struct mii_dev *bus;
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
- u32 serdes1_prtcl, cfg;
-
- cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
- FSL_CHASSIS3_SRDS1_PRTCL_MASK;
- cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
- serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
- int *riser_phy_addr;
- char *env_hwconfig = env_get("hwconfig");
-
- if (hwconfig_f("xqsgmii", env_hwconfig))
- riser_phy_addr = &xqsgii_riser_phy_addr[0];
- else
- riser_phy_addr = &sgmii_riser_phy_addr[0];
-
- switch (serdes1_prtcl) {
- case 0x12:
- case 0x15:
- case 0x1E:
- case 0x3A:
- switch (dpmac_id) {
- case 1:
- wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[1]);
- break;
- case 2:
- wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[0]);
- break;
- case 3:
- wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[3]);
- break;
- case 7:
- wriop_set_phy_address(dpmac_id, 0, riser_phy_addr[2]);
- break;
- default:
- printf("WRIOP: Wrong DPMAC%d set to SGMII", dpmac_id);
- break;
- }
- break;
- default:
- printf("%s qds: WRIOP: Unsupported SerDes1 Protocol 0x%02x\n",
- __func__, serdes1_prtcl);
- return;
- }
- dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
- bus = mii_dev_for_muxval(EMI1_SLOT1);
- wriop_set_mdio(dpmac_id, bus);
-}
-
-void ls1088a_handle_phy_interface_qsgmii(int dpmac_id)
-{
- struct mii_dev *bus;
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
- u32 serdes1_prtcl, cfg;
-
- cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
- FSL_CHASSIS3_SRDS1_PRTCL_MASK;
- cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
- serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
- switch (serdes1_prtcl) {
- case 0x1D:
- case 0x1E:
- switch (dpmac_id) {
- case 3:
- case 4:
- case 5:
- case 6:
- wriop_set_phy_address(dpmac_id, 0, dpmac_id + 9);
- break;
- case 7:
- case 8:
- case 9:
- case 10:
- wriop_set_phy_address(dpmac_id, 0, dpmac_id + 1);
- break;
- }
-
- dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
- bus = mii_dev_for_muxval(EMI1_SLOT1);
- wriop_set_mdio(dpmac_id, bus);
- break;
- default:
- printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
- serdes1_prtcl);
- break;
- }
-}
-
-void ls1088a_handle_phy_interface_xsgmii(int i)
-{
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
- u32 serdes1_prtcl, cfg;
-
- cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
- FSL_CHASSIS3_SRDS1_PRTCL_MASK;
- cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
- serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
- switch (serdes1_prtcl) {
- case 0x15:
- case 0x1D:
- case 0x1E:
- wriop_set_phy_address(i, 0, i + 26);
- ls1088a_qds_enable_SFP_TX(SFP_TX);
- break;
- default:
- printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
- serdes1_prtcl);
- break;
- }
-}
-
-static void ls1088a_handle_phy_interface_rgmii(int dpmac_id)
-{
- struct ccsr_gur __iomem *gur = (void *)CFG_SYS_FSL_GUTS_ADDR;
- u32 serdes1_prtcl, cfg;
- struct mii_dev *bus;
-
- cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
- FSL_CHASSIS3_SRDS1_PRTCL_MASK;
- cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
- serdes1_prtcl = serdes_get_number(FSL_SRDS_1, cfg);
-
- switch (dpmac_id) {
- case 4:
- wriop_set_phy_address(dpmac_id, 0, RGMII_PHY1_ADDR);
- dpmac_info[dpmac_id].board_mux = EMI1_RGMII1;
- bus = mii_dev_for_muxval(EMI1_RGMII1);
- wriop_set_mdio(dpmac_id, bus);
- break;
- case 5:
- wriop_set_phy_address(dpmac_id, 0, RGMII_PHY2_ADDR);
- dpmac_info[dpmac_id].board_mux = EMI1_RGMII2;
- bus = mii_dev_for_muxval(EMI1_RGMII2);
- wriop_set_mdio(dpmac_id, bus);
- break;
- default:
- printf("qds: WRIOP: Unsupported RGMII SerDes Protocol 0x%02x\n",
- serdes1_prtcl);
- break;
- }
-}
-#endif
-
-int board_eth_init(struct bd_info *bis)
-{
- int error = 0, i;
-#ifdef CONFIG_FSL_MC_ENET
- struct memac_mdio_info *memac_mdio0_info;
- char *env_hwconfig = env_get("hwconfig");
-
- initialize_dpmac_to_slot();
-
- memac_mdio0_info = (struct memac_mdio_info *)malloc(
- sizeof(struct memac_mdio_info));
- memac_mdio0_info->regs =
- (struct memac_mdio_controller *)
- CFG_SYS_FSL_WRIOP1_MDIO1;
- memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
-
- /* Register the real MDIO1 bus */
- fm_memac_mdio_init(bis, memac_mdio0_info);
- /* Register the muxing front-ends to the MDIO buses */
- ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII1);
- ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_RGMII2);
- ls1088a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
-
- for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
- switch (wriop_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_RGMII:
- case PHY_INTERFACE_MODE_RGMII_ID:
- ls1088a_handle_phy_interface_rgmii(i);
- break;
- case PHY_INTERFACE_MODE_QSGMII:
- ls1088a_handle_phy_interface_qsgmii(i);
- break;
- case PHY_INTERFACE_MODE_SGMII:
- ls1088a_handle_phy_interface_sgmii(i);
- break;
- case PHY_INTERFACE_MODE_XGMII:
- ls1088a_handle_phy_interface_xsgmii(i);
- break;
- default:
- break;
-
- if (i == 16)
- i = NUM_WRIOP_PORTS;
- }
- }
-
- error = cpu_eth_init(bis);
-
- if (hwconfig_f("xqsgmii", env_hwconfig)) {
- for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
- switch (wriop_get_enet_if(i)) {
- case PHY_INTERFACE_MODE_QSGMII:
- qsgmii_configure_repeater(i);
- break;
- case PHY_INTERFACE_MODE_SGMII:
- sgmii_configure_repeater(i);
- break;
- default:
- break;
- }
-
- if (i == 16)
- i = NUM_WRIOP_PORTS;
- }
- }
-#endif
- error = pci_eth_init(bis);
- return error;
-}
-#endif // !CONFIG_DM_ETH
#if defined(CONFIG_RESET_PHY_R)
void reset_phy(void)
@@ -747,10 +14,10 @@ void reset_phy(void)
}
#endif /* CONFIG_RESET_PHY_R */
-#if defined(CONFIG_DM_ETH) && defined(CONFIG_MULTI_DTB_FIT)
+#if defined(CONFIG_MULTI_DTB_FIT)
-/* Structure to hold SERDES protocols supported in case of
- * CONFIG_DM_ETH enabled (network interfaces are described in the DTS).
+/* Structure to hold SERDES protocols supported (network interfaces are
+ * described in the DTS).
*
* @serdes_block: the index of the SERDES block
* @serdes_protocol: the decimal value of the protocol supported
diff --git a/board/freescale/ls1088a/eth_ls1088ardb.c b/board/freescale/ls1088a/eth_ls1088ardb.c
index 5792070f9394..fb6f9c1a813f 100644
--- a/board/freescale/ls1088a/eth_ls1088ardb.c
+++ b/board/freescale/ls1088a/eth_ls1088ardb.c
@@ -3,100 +3,7 @@
* Copyright 2017 NXP
*/
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include <netdev.h>
-#include <malloc.h>
-#include <fsl_mdio.h>
-#include <miiphy.h>
-#include <phy.h>
-#include <fm_eth.h>
-#include <asm/io.h>
-#include <exports.h>
-#include <asm/arch/fsl_serdes.h>
#include <fsl-mc/fsl_mc.h>
-#include <fsl-mc/ldpaa_wriop.h>
-
-#ifndef CONFIG_DM_ETH
-int board_eth_init(struct bd_info *bis)
-{
-#if defined(CONFIG_FSL_MC_ENET)
- int i, interface;
- struct memac_mdio_info mdio_info;
- struct mii_dev *dev;
- struct ccsr_gur *gur = (void *)(CFG_SYS_FSL_GUTS_ADDR);
- struct memac_mdio_controller *reg;
- u32 srds_s1, cfg;
-
- cfg = in_le32(&gur->rcwsr[FSL_CHASSIS3_SRDS1_REGSR - 1]) &
- FSL_CHASSIS3_SRDS1_PRTCL_MASK;
- cfg >>= FSL_CHASSIS3_SRDS1_PRTCL_SHIFT;
-
- srds_s1 = serdes_get_number(FSL_SRDS_1, cfg);
-
- reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO1;
- mdio_info.regs = reg;
- mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
-
- /* Register the EMI 1 */
- fm_memac_mdio_init(bis, &mdio_info);
-
- reg = (struct memac_mdio_controller *)CFG_SYS_FSL_WRIOP1_MDIO2;
- mdio_info.regs = reg;
- mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
-
- /* Register the EMI 2 */
- fm_memac_mdio_init(bis, &mdio_info);
-
- switch (srds_s1) {
- case 0x1D:
- /*
- * 10GBase-R does not need a PHY to work, but to avoid U-boot
- * use default PHY address which is zero to a MAC when it found
- * a MAC has no PHY address, we give a PHY address to 10GBase-R
- * MAC error.
- */
- wriop_set_phy_address(WRIOP1_DPMAC1, 0, 0x0a);
- wriop_set_phy_address(WRIOP1_DPMAC2, 0, AQ_PHY_ADDR1);
- wriop_set_phy_address(WRIOP1_DPMAC3, 0, QSGMII1_PORT1_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC4, 0, QSGMII1_PORT2_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC5, 0, QSGMII1_PORT3_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC6, 0, QSGMII1_PORT4_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC7, 0, QSGMII2_PORT1_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC8, 0, QSGMII2_PORT2_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC9, 0, QSGMII2_PORT3_PHY_ADDR);
- wriop_set_phy_address(WRIOP1_DPMAC10, 0,
- QSGMII2_PORT4_PHY_ADDR);
-
- break;
- default:
- printf("SerDes1 protocol 0x%x is not supported on LS1088ARDB\n",
- srds_s1);
- break;
- }
-
- for (i = WRIOP1_DPMAC3; i <= WRIOP1_DPMAC10; i++) {
- interface = wriop_get_enet_if(i);
- switch (interface) {
- case PHY_INTERFACE_MODE_QSGMII:
- dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
- wriop_set_mdio(i, dev);
- break;
- default:
- break;
- }
- }
-
- dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
- wriop_set_mdio(WRIOP1_DPMAC2, dev);
-
- cpu_eth_init(bis);
-#endif /* CONFIG_FMAN_ENET */
-
- return pci_eth_init(bis);
-}
-#endif
#if defined(CONFIG_RESET_PHY_R)
void reset_phy(void)
diff --git a/board/freescale/ls1088a/ls1088a.c b/board/freescale/ls1088a/ls1088a.c
index 0d3f22ce2bb3..7a1047a77f73 100644
--- a/board/freescale/ls1088a/ls1088a.c
+++ b/board/freescale/ls1088a/ls1088a.c
@@ -824,7 +824,7 @@ int board_init(void)
ppa_init();
#endif
-#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
+#if !defined(CONFIG_SYS_EARLY_PCI_INIT)
pci_init();
#endif
--
2.25.1
More information about the U-Boot
mailing list