[PATCH v2 06/17] clk: starfive: Add StarFive JH7110 clock driver
yanhong wang
yanhong.wang at starfivetech.com
Thu Feb 16 04:16:19 CET 2023
On 2023/1/22 2:56, Sean Anderson wrote:
> On 1/18/23 03:11, Yanhong Wang wrote:
>> Add a DM clock driver for StarFive JH7110 SoC.
>>
>> Signed-off-by: Yanhong Wang <yanhong.wang at starfivetech.com>
>> ---
>> drivers/clk/Kconfig | 1 +
>> drivers/clk/Makefile | 1 +
>> drivers/clk/starfive/Kconfig | 17 +
>> drivers/clk/starfive/Makefile | 4 +
>> drivers/clk/starfive/clk-jh7110-pll.c | 293 ++++++++++++++
>> drivers/clk/starfive/clk-jh7110.c | 559 ++++++++++++++++++++++++++
>> drivers/clk/starfive/clk.h | 60 +++
>> 7 files changed, 935 insertions(+)
>> create mode 100644 drivers/clk/starfive/Kconfig
>> create mode 100644 drivers/clk/starfive/Makefile
>> create mode 100644 drivers/clk/starfive/clk-jh7110-pll.c
>> create mode 100644 drivers/clk/starfive/clk-jh7110.c
>> create mode 100644 drivers/clk/starfive/clk.h
>>
>> diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
>> index 09aa97ee8c..4d60c84aad 100644
>> --- a/drivers/clk/Kconfig
>> +++ b/drivers/clk/Kconfig
>> @@ -235,6 +235,7 @@ source "drivers/clk/owl/Kconfig"
>> source "drivers/clk/renesas/Kconfig"
>> source "drivers/clk/sunxi/Kconfig"
>> source "drivers/clk/sifive/Kconfig"
>> +source "drivers/clk/starfive/Kconfig"
>> source "drivers/clk/stm32/Kconfig"
>> source "drivers/clk/tegra/Kconfig"
>> source "drivers/clk/ti/Kconfig"
>> diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
>> index c274cda77c..66f5860356 100644
>> --- a/drivers/clk/Makefile
>> +++ b/drivers/clk/Makefile
>> @@ -13,6 +13,7 @@ obj-$(CONFIG_$(SPL_TPL_)CLK_COMPOSITE_CCF) += clk-composite.o
>> obj-y += analogbits/
>> obj-y += imx/
>> +obj-$(CONFIG_CLK_JH7110) += starfive/
>> obj-y += tegra/
>> obj-y += ti/
>> obj-$(CONFIG_$(SPL_TPL_)CLK_INTEL) += intel/
>> diff --git a/drivers/clk/starfive/Kconfig b/drivers/clk/starfive/Kconfig
>> new file mode 100644
>> index 0000000000..9399ef6d51
>> --- /dev/null
>> +++ b/drivers/clk/starfive/Kconfig
>> @@ -0,0 +1,17 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +
>> +config SPL_CLK_JH7110
>> + bool "SPL clock support for JH7110"
>> + depends on STARFIVE_JH7110 && SPL
>> + select SPL_CLK
>> + select SPL_CLK_CCF
>> + help
>> + This enables SPL DM support for clock driver in JH7110.
>> +
>> +config CLK_JH7110
>> + bool "StarFive JH7110 clock support"
>> + depends on STARFIVE_JH7110
>> + select CLK
>> + select CLK_CCF
>> + help
>> + This enables support clock driver for StarFive JH7110 SoC platform.
>> diff --git a/drivers/clk/starfive/Makefile b/drivers/clk/starfive/Makefile
>> new file mode 100644
>> index 0000000000..ec0d157094
>> --- /dev/null
>> +++ b/drivers/clk/starfive/Makefile
>> @@ -0,0 +1,4 @@
>> +# SPDX-License-Identifier: GPL-2.0+
>> +
>> +obj-y += clk-jh7110.o
>> +obj-y += clk-jh7110-pll.o
>> diff --git a/drivers/clk/starfive/clk-jh7110-pll.c b/drivers/clk/starfive/clk-jh7110-pll.c
>> new file mode 100644
>> index 0000000000..08e1755d3a
>> --- /dev/null
>> +++ b/drivers/clk/starfive/clk-jh7110-pll.c
>> @@ -0,0 +1,293 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>
> 2022-23 :)
>
>> + *
>> + * Author: Yanhong Wang <yanhong.wang at starfivetech.com>
>> + */
>> +
>> +#include <common.h>
>> +#include <asm/io.h>
>> +#include <malloc.h>
>> +#include <clk-uclass.h>
>> +#include <div64.h>
>> +#include <dm/device.h>
>> +#include <linux/bitops.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/delay.h>
>> +#include <linux/err.h>
>> +
>> +#include "clk.h"
>> +
>> +#define UBOOT_DM_CLK_JH7110_PLLX "jh7110_clk_pllx"
>> +
>> +#define PLL_PD_OFF 1
>> +#define PLL_PD_ON 0
>> +
>> +#define CLK_DDR_BUS_MASK GENMASK(29, 24)
>> +#define CLK_DDR_BUS_OFFSET 0xAC
>> +#define CLK_DDR_BUS_OSC_DIV2 0
>> +#define CLK_DDR_BUS_PLL1_DIV2 1
>> +#define CLK_DDR_BUS_PLL1_DIV4 2
>> +#define CLK_DDR_BUS_PLL1_DIV8 3
>> +
>> +struct clk_jh7110_pllx {
>> + struct clk clk;
>> + void __iomem *base;
>> + void __iomem *sysreg;
>> + enum starfive_pll_type type;
>> + const struct starfive_pllx_offset *offset;
>> + const struct starfive_pllx_rate *rate_table;
>> + int rate_count;
>> +};
>> +
>> +#define getbits_le32(addr, mask) ((in_le32(addr) & (mask)) >> __ffs((mask)))
>> +
>> +#define PLLX_SET(offset, mask, val) do {\
>> + reg = readl((ulong *)((ulong)pll->base + (offset))); \
>> + reg &= ~(mask); \
>> + reg |= (mask) & ((val) << __ffs(mask)); \
>> + writel(reg, (ulong *)((ulong)pll->base + (offset))); \
>> + } while (0)
>> +
>> +#define PLLX_RATE(_rate, _pd, _fd, _pd1, _da, _ds) \
>> + { \
>> + .rate = (_rate), \
>> + .prediv = (_pd), \
>> + .fbdiv = (_fd), \
>> + .postdiv1 = (_pd1), \
>> + .dacpd = (_da), \
>> + .dsmpd = (_ds), \
>> + }
>> +
>> +#define to_clk_pllx(_clk) container_of(_clk, struct clk_jh7110_pllx, clk)
>> +
>> +static const struct starfive_pllx_rate jh7110_pll0_tbl[] = {
>> + PLLX_RATE(375000000UL, 8, 125, 1, 1, 1),
>> + PLLX_RATE(500000000UL, 6, 125, 1, 1, 1),
>> + PLLX_RATE(625000000UL, 24, 625, 1, 1, 1),
>> + PLLX_RATE(750000000UL, 4, 125, 1, 1, 1),
>> + PLLX_RATE(875000000UL, 24, 875, 1, 1, 1),
>> + PLLX_RATE(1000000000UL, 3, 125, 1, 1, 1),
>> + PLLX_RATE(1250000000UL, 12, 625, 1, 1, 1),
>> + PLLX_RATE(1375000000UL, 24, 1375, 1, 1, 1),
>> + PLLX_RATE(1500000000UL, 2, 125, 1, 1, 1),
>> + PLLX_RATE(1625000000UL, 24, 1625, 1, 1, 1),
>> + PLLX_RATE(1750000000UL, 12, 875, 1, 1, 1),
>> + PLLX_RATE(1800000000UL, 3, 225, 1, 1, 1),
>> +};
>> +
>> +static const struct starfive_pllx_rate jh7110_pll1_tbl[] = {
>> + PLLX_RATE(1066000000UL, 12, 533, 1, 1, 1),
>> + PLLX_RATE(1200000000UL, 1, 50, 1, 1, 1),
>> + PLLX_RATE(1400000000UL, 6, 350, 1, 1, 1),
>> + PLLX_RATE(1600000000UL, 3, 200, 1, 1, 1),
>> +};
>> +
>> +static const struct starfive_pllx_rate jh7110_pll2_tbl[] = {
>> + PLLX_RATE(1228800000UL, 15, 768, 1, 1, 1),
>> + PLLX_RATE(1188000000UL, 2, 99, 1, 1, 1),
>> +};
>
> My comment from last time stands about pd1/da/ds
>
The values of pd1/da/ds do not need to be saved, and I will replace them with constants in the next version.
> (sorry for not getting back to you faster)
>
>> +static const struct starfive_pllx_offset jh7110_pll0_offset = {
>> + .prediv = 0x24,
>> + .fbdiv = 0x1c,
>> + .frac = 0x20,
>> + .postdiv1 = 0x20,
>> + .dacpd = 0x18,
>> + .dsmpd = 0x18,
>> + .prediv_mask = GENMASK(5, 0),
>> + .fbdiv_mask = GENMASK(11, 0),
>> + .frac_mask = GENMASK(23, 0),
>> + .postdiv1_mask = GENMASK(29, 28),
>> + .dacpd_mask = BIT(24),
>> + .dsmpd_mask = BIT(25)
>> +};
>> +
>> +static const struct starfive_pllx_offset jh7110_pll1_offset = {
>> + .prediv = 0x2c,
>> + .fbdiv = 0x24,
>> + .frac = 0x28,
>> + .postdiv1 = 0x28,
>> + .dacpd = 0x24,
>> + .dsmpd = 0x24,
>> + .prediv_mask = GENMASK(5, 0),
>> + .fbdiv_mask = GENMASK(28, 17),
>> + .frac_mask = GENMASK(23, 0),
>> + .postdiv1_mask = GENMASK(29, 28),
>> + .dacpd_mask = BIT(15),
>> + .dsmpd_mask = BIT(16)
>> +};
>> +
>> +static const struct starfive_pllx_offset jh7110_pll2_offset = {
>> + .prediv = 0x34,
>> + .fbdiv = 0x2c,
>> + .frac = 0x30,
>> + .postdiv1 = 0x30,
>> + .dacpd = 0x2c,
>> + .dsmpd = 0x2c,
>> + .prediv_mask = GENMASK(5, 0),
>> + .fbdiv_mask = GENMASK(28, 17),
>> + .frac_mask = GENMASK(23, 0),
>> + .postdiv1_mask = GENMASK(29, 28),
>> + .dacpd_mask = BIT(15),
>> + .dsmpd_mask = BIT(16)
>> +};
>
> OK, so it looks like these PLLs don't have the same register offsets
> like I thought. Since this is the case, you can keep your existing style
> or use the style from v1.
>
>> +struct starfive_pllx_clk starfive_jh7110_pll0 __initdata = {
>> + .type = PLL0,
>> + .offset = &jh7110_pll0_offset,
>> + .rate_table = jh7110_pll0_tbl,
>> + .rate_count = ARRAY_SIZE(jh7110_pll0_tbl),
>> +};
>> +
>> +struct starfive_pllx_clk starfive_jh7110_pll1 __initdata = {
>> + .type = PLL1,
>> + .offset = &jh7110_pll1_offset,
>> + .rate_table = jh7110_pll1_tbl,
>> + .rate_count = ARRAY_SIZE(jh7110_pll1_tbl),
>> +};
>> +
>> +struct starfive_pllx_clk starfive_jh7110_pll2 __initdata = {
>> + .type = PLL2,
>> + .offset = &jh7110_pll2_offset,
>> + .rate_table = jh7110_pll2_tbl,
>> + .rate_count = ARRAY_SIZE(jh7110_pll2_tbl),
>> +};
>> +
>> +static const struct starfive_pllx_rate *
>> + jh7110_get_pll_settings(struct clk_jh7110_pllx *pll, unsigned long rate)
>
> No indent necessary.
>
>> +{
>> + for (int i = 0; i < pll->rate_count; i++)
>> + if (rate == pll->rate_table[i].rate)
>> + return &pll->rate_table[i];
>> +
>> + return NULL;
>> +}
>> +
>> +static void jh7110_pll_set_rate(struct clk_jh7110_pllx *pll,
>> + const struct starfive_pllx_rate *rate)
>> +{
>> + u32 reg;
>> + bool set = (pll->type == PLL1) ? true : false;
>> +
>> + if (set) {
>> + reg = readl((ulong *)((ulong)pll->sysreg + CLK_DDR_BUS_OFFSET));
>> + reg &= ~CLK_DDR_BUS_MASK;
>> + reg |= CLK_DDR_BUS_OSC_DIV2 << __ffs(CLK_DDR_BUS_MASK);
>> + writel(reg, (ulong *)((ulong)pll->sysreg + CLK_DDR_BUS_OFFSET));
>> + }
>> +
>> + PLLX_SET(pll->offset->pd, pll->offset->pd_mask, PLL_PD_OFF);
>> + PLLX_SET(pll->offset->dacpd, pll->offset->dacpd_mask, rate->dacpd);
>> + PLLX_SET(pll->offset->dsmpd, pll->offset->dsmpd_mask, rate->dsmpd);
>
> E.g. this can be PLLX_SET(pll->offset->dsmpd, pll->offset->dsmpd_mask, 1);
>
>> + PLLX_SET(pll->offset->prediv, pll->offset->prediv_mask, rate->prediv);
>> + PLLX_SET(pll->offset->fbdiv, pll->offset->fbdiv_mask, rate->fbdiv);
>> + PLLX_SET(pll->offset->postdiv1, pll->offset->postdiv1, rate->postdiv1 >> 1);
>
> Same question from last time. As you explained, we have something like
>
> postdiv divider
> 0 /1
> 1 /2
> 2 /4
> 3 /8
>
> But right shifting is not the correct way to do this. You need to use
> ffs (or ilog2). Of course, you missed this bug because you only ever use
> a /1 postdiv. So I suggest you just always write 0 to postdiv and skip
> the calculation.
>
The values of pd1/da/ds do not need to be saved, and I will replace them with constants in the next version.
>> + PLLX_SET(pll->offset->pd, pll->offset->pd_mask, PLL_PD_ON);
>
> This still obscures the actual registers...
>
> I would prefer for you to combine writes to the same register so it is
> clear what is going on.
>
I will fix.
>> +
>> + if (set) {
>> + udelay(100);
>> + reg = readl((ulong *)((ulong)pll->sysreg + CLK_DDR_BUS_OFFSET));
>> + reg &= ~CLK_DDR_BUS_MASK;
>> + reg |= CLK_DDR_BUS_PLL1_DIV2 << __ffs(CLK_DDR_BUS_MASK);
>> + writel(reg, (ulong *)((ulong)pll->sysreg + CLK_DDR_BUS_OFFSET));
>> + }
>> +}
>> +
>> +static ulong jh7110_pllx_recalc_rate(struct clk *clk)
>> +{
>> + struct clk_jh7110_pllx *pll = to_clk_pllx(dev_get_clk_ptr(clk->dev));
>> + u64 refclk = clk_get_parent_rate(clk);
>> + u32 dacpd, dsmpd;
>> + u32 prediv, fbdiv, postdiv1;
>> + u64 frac;
>> +
>> + dacpd = getbits_le32((ulong)pll->base + pll->offset->dacpd,
>> + pll->offset->dacpd_mask);
>> + dsmpd = getbits_le32((ulong)pll->base + pll->offset->dsmpd,
>> + pll->offset->dsmpd_mask);
>> + prediv = getbits_le32((ulong)pll->base + pll->offset->prediv,
>> + pll->offset->prediv_mask);
>> + fbdiv = getbits_le32((ulong)pll->base + pll->offset->fbdiv,
>> + pll->offset->fbdiv_mask);
>> + postdiv1 = 1 << getbits_le32((ulong)pll->base + pll->offset->postdiv1,
>> + pll->offset->postdiv1_mask);
>> + frac = (u64)getbits_le32((ulong)pll->base + pll->offset->frac,
>> + pll->offset->frac_mask);
>> +
>> + /* Integer Mode or Fraction Mode */
>> + if (dacpd == 1 && dsmpd == 1)
>> + frac = 0;
>> + else if (dacpd == 0 && dsmpd == 0)
>> + do_div(frac, 1 << 24);
>
> Last time you provided an explanation for where this came from. Please
> keep that explanation as a comment here.
>
>> + else
>> + return -EINVAL;
>> +
>> + refclk *= (fbdiv + frac);
>> + do_div(refclk, prediv * postdiv1);
>> +
>> + return refclk;
>> +}
>> +
>> +static ulong jh7110_pllx_set_rate(struct clk *clk, ulong drate)
>> +{
>> + struct clk_jh7110_pllx *pll = to_clk_pllx(dev_get_clk_ptr(clk->dev));
>> + const struct starfive_pllx_rate *rate;
>> +
>> + rate = jh7110_get_pll_settings(pll, drate);
>> + if (!rate)
>> + return -EINVAL;
>> +
>> + jh7110_pll_set_rate(pll, rate);
>> +
>> + return jh7110_pllx_recalc_rate(clk);
>> +}
>> +
>> +static const struct clk_ops clk_jh7110_ops = {
>> + .set_rate = jh7110_pllx_set_rate,
>> + .get_rate = jh7110_pllx_recalc_rate,
>> +};
>> +
>> +struct clk *starfive_jh7110_pll(const char *name, const char *parent_name,
>> + void __iomem *base, void __iomem *sysreg,
>> + const struct starfive_pllx_clk *pll_clk)
>> +{
>> + struct clk_jh7110_pllx *pll;
>> + struct clk *clk;
>> + int ret;
>> +
>> + if (!pll_clk || !base || !sysreg)
>> + return ERR_PTR(-EINVAL);
>> +
>> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
>> + if (!pll)
>> + return ERR_PTR(-ENOMEM);
>> +
>> + pll->base = base;
>> + pll->sysreg = sysreg;
>> + pll->type = pll_clk->type;
>> + pll->offset = pll_clk->offset;
>> + pll->rate_table = pll_clk->rate_table;
>> + pll->rate_count = pll_clk->rate_count;
>> +
>> + clk = &pll->clk;
>> + ret = clk_register(clk, UBOOT_DM_CLK_JH7110_PLLX, name, parent_name);
>> + if (ret) {
>> + kfree(pll);
>> + return ERR_PTR(ret);
>> + }
>> +
>> + if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL0)
>> + jh7110_pllx_set_rate(clk, 1250000000);
>> +
>> + if (IS_ENABLED(CONFIG_SPL_BUILD) && pll->type == PLL2)
>> + jh7110_pllx_set_rate(clk, 1188000000);
>> +
>> + return clk;
>> +}
>> +
>> +U_BOOT_DRIVER(jh7110_clk_pllx) = {
>> + .name = UBOOT_DM_CLK_JH7110_PLLX,
>> + .id = UCLASS_CLK,
>> + .ops = &clk_jh7110_ops,
>> +};
>> diff --git a/drivers/clk/starfive/clk-jh7110.c b/drivers/clk/starfive/clk-jh7110.c
>> new file mode 100644
>> index 0000000000..a904852cab
>> --- /dev/null
>> +++ b/drivers/clk/starfive/clk-jh7110.c
>> @@ -0,0 +1,559 @@
>> +// SPDX-License-Identifier: GPL-2.0+
>> +/*
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + *
>> + * Author: Yanhong Wang <yanhong.wang at starfivetech.com>
>> + */
>> +
>> +#include <common.h>
>> +#include <clk.h>
>> +#include <clk-uclass.h>
>> +#include <dm.h>
>> +#include <dm/device.h>
>> +#include <dm/devres.h>
>> +#include <dm/lists.h>
>> +#include <dt-bindings/clock/starfive-jh7110.h>
>> +#include <log.h>
>> +#include <linux/clk-provider.h>
>> +
>> +#include "clk.h"
>> +
>> +#define STARFIVE_CLK_ENABLE_SHIFT 31 /* [31] */
>> +#define STARFIVE_CLK_INVERT_SHIFT 30 /* [30] */
>> +#define STARFIVE_CLK_MUX_SHIFT 24 /* [29:24] */
>> +#define STARFIVE_CLK_DIV_SHIFT 0 /* [23:0] */
>> +
>> +#define OFFSET(id) ((id) * 4)
>> +#define AONOFFSET(id) (((id) - JH7110_SYSCLK_END) * 4)
>> +#define STGOFFSET(id) (((id) - JH7110_AONCLK_END) * 4)
>> +
>> +typedef int (*jh1710_init_fn)(struct udevice *dev);
>> +
>> +struct jh7110_clk_priv {
>> + void __iomem *reg;
>> + jh1710_init_fn init;
>> +};
>> +
>> +static const char *cpu_root_sels[2] = {
>> + [0] = "osc",
>> + [1] = "pll0_out",
>> +};
>> +
>> +static const char *perh_root_sels[2] = {
>> + [0] = "pll0_out",
>> + [1] = "pll2_out",
>> +};
>> +
>> +static const char *bus_root_sels[2] = {
>> + [0] = "osc",
>> + [1] = "pll2_out",
>> +};
>> +
>> +static const char *qspi_ref_sels[2] = {
>> + [0] = "osc",
>> + [1] = "qspi_ref_src",
>> +};
>> +
>> +static const char *gmac1_tx_sels[2] = {
>> + [0] = "gmac1_gtxclk",
>> + [1] = "gmac1_rmii_rtx",
>> +};
>> +
>> +static const char *gmac0_tx_sels[2] = {
>> + [0] = "gmac0_gtxclk",
>> + [1] = "gmac0_rmii_rtx",
>> +};
>> +
>> +static struct clk *starfive_clk_mux(void __iomem *reg,
>> + const char *name,
>> + unsigned int offset,
>> + u8 width,
>> + const char * const *parent_names,
>> + u8 num_parents)
>> +{
>> + return clk_register_mux(NULL, name, parent_names, num_parents, 0,
>> + reg + offset, STARFIVE_CLK_MUX_SHIFT,
>> + width, 0);
>> +}
>> +
>> +static struct clk *starfive_clk_gate(void __iomem *reg,
>> + const char *name,
>> + const char *parent_name,
>> + unsigned int offset)
>> +{
>> + return clk_register_gate(NULL, name, parent_name, 0, reg + offset,
>> + STARFIVE_CLK_ENABLE_SHIFT, 0, NULL);
>> +}
>> +
>> +static struct clk *starfive_clk_fix_factor(void __iomem *reg,
>> + const char *name,
>> + const char *parent_name,
>> + unsigned int mult,
>> + unsigned int div)
>> +{
>> + return clk_register_fixed_factor(NULL, name, parent_name,
>> + 0, mult, div);
>> +}
>> +
>> +static struct clk *starfive_clk_divider(void __iomem *reg,
>> + const char *name,
>> + const char *parent_name,
>> + unsigned int offset,
>> + u8 width)
>> +{
>> + return clk_register_divider(NULL, name, parent_name, 0, reg + offset,
>> + 0, width, CLK_DIVIDER_ONE_BASED);
>> +}
>> +
>> +static struct clk *starfive_clk_composite(void __iomem *reg,
>> + const char *name,
>> + const char * const *parent_names,
>> + unsigned int num_parents,
>> + unsigned int offset,
>> + unsigned int mux_width,
>> + unsigned int gate_width,
>> + unsigned int div_width)
>> +{
>> + struct clk *clk = ERR_PTR(-ENOMEM);
>> + struct clk_divider *div = NULL;
>> + struct clk_gate *gate = NULL;
>> + struct clk_mux *mux = NULL;
>> + int mask_arry[4] = {0x1, 0x3, 0x7, 0xF};
>> + int mask;
>> +
>> + if (mux_width) {
>> + if (mux_width > 4)
>> + goto fail;
>> + else
>> + mask = mask_arry[mux_width - 1];
>> +
>> + mux = kzalloc(sizeof(*mux), GFP_KERNEL);
>> + if (!mux)
>> + goto fail;
>> +
>> + mux->reg = reg + offset;
>> + mux->mask = mask;
>> + mux->shift = STARFIVE_CLK_MUX_SHIFT;
>> + mux->num_parents = num_parents;
>> + mux->flags = 0;
>> + mux->parent_names = parent_names;
>> + }
>> +
>> + if (gate_width) {
>> + gate = kzalloc(sizeof(*gate), GFP_KERNEL);
>> +
>> + if (!gate)
>> + goto fail;
>> +
>> + gate->reg = reg + offset;
>> + gate->bit_idx = STARFIVE_CLK_ENABLE_SHIFT;
>> + gate->flags = 0;
>> + }
>> +
>> + if (div_width) {
>> + div = kzalloc(sizeof(*div), GFP_KERNEL);
>> + if (!div)
>> + goto fail;
>> +
>> + div->reg = reg + offset;
>> +
>> + if (offset == OFFSET(JH7110_SYSCLK_UART3_CORE) ||
>> + offset == OFFSET(JH7110_SYSCLK_UART4_CORE) ||
>> + offset == OFFSET(JH7110_SYSCLK_UART5_CORE)) {
>> + div->shift = 8;
>> + div->width = 8;
>> + } else {
>> + div->shift = STARFIVE_CLK_DIV_SHIFT;
>> + div->width = div_width;
>> + }
>> + div->flags = CLK_DIVIDER_ONE_BASED;
>> + div->table = NULL;
>> + }
>> +
>> + clk = clk_register_composite(NULL, name,
>> + parent_names, num_parents,
>> + &mux->clk, &clk_mux_ops,
>> + &div->clk, &clk_divider_ops,
>> + &gate->clk, &clk_gate_ops, 0);
>> +
>> + if (IS_ERR(clk))
>> + goto fail;
>> +
>> + return clk;
>> +
>> +fail:
>> + kfree(gate);
>> + kfree(div);
>> + kfree(mux);
>> + return ERR_CAST(clk);
>> +}
>> +
>> +static struct clk *starfive_clk_fix_parent_composite(void __iomem *reg,
>> + const char *name,
>> + const char *parent_names,
>> + unsigned int offset,
>> + unsigned int mux_width,
>> + unsigned int gate_width,
>> + unsigned int div_width)
>> +{
>> + const char * const *parents;
>> +
>> + parents = &parent_names;
>> +
>> + return starfive_clk_composite(reg, name, parents, 1, offset,
>> + mux_width, gate_width, div_width);
>> +}
>> +
>> +static struct clk *starfive_clk_gate_divider(void __iomem *reg,
>> + const char *name,
>> + const char *parent,
>> + unsigned int offset,
>> + unsigned int width)
>> +{
>> + const char * const *parent_names;
>> +
>> + parent_names = &parent;
>> +
>> + return starfive_clk_composite(reg, name, parent_names, 1,
>> + offset, 0, 1, width);
>> +}
>> +
>> +static int jh7110_syscrg_init(struct udevice *dev)
>> +{
>> + struct jh7110_clk_priv *priv = dev_get_priv(dev);
>> + struct ofnode_phandle_args args;
>> + fdt_addr_t addr;
>> + int ret;
>> +
>> + ret = ofnode_parse_phandle_with_args(dev->node_, "starfive,sys-syscon", NULL, 0, 0, &args);
>> + if (ret)
>> + return ret;
>
> Last time you said the bindings in linux had not been updated. Have you
> resubmitted with this property added?
>
The part of the bindings in linux is submitted by other colleagues, and we will communicate
regularly to maintain consensus.
> Maybe you should have a separate binding for the PLLs? See below for
> ordering advice.
Pll clocks need two base addresses: the base address of syscon and syscrg clock control. If the pll is
separated into independent nodes, the base address of the required syscrg clock control is not well defined;
the parent clock of some clocks in the syscrg clock control is the pll clock , which requires the pll clock
driver to be initialized first, otherwise the clock that depends on the pll clock will report an error
when calling clk_register()[ get parent clock fail]. So it is not appropriate to separate the pll clock
into independent nodes.
>
>> + addr = ofnode_get_addr(args.node);
>> + if (addr == FDT_ADDR_T_NONE)
>> + return -EINVAL;
>> +
>> + clk_dm(JH7110_SYSCLK_PLL0_OUT,
>> + starfive_jh7110_pll("pll0_out", "osc", (void __iomem *)addr,
>> + priv->reg, &starfive_jh7110_pll0));
>> + clk_dm(JH7110_SYSCLK_PLL1_OUT,
>> + starfive_jh7110_pll("pll1_out", "osc", (void __iomem *)addr,
>> + priv->reg, &starfive_jh7110_pll1));
>> + clk_dm(JH7110_SYSCLK_PLL2_OUT,
>> + starfive_jh7110_pll("pll2_out", "osc", (void __iomem *)addr,
>> + priv->reg, &starfive_jh7110_pll2));
>> + clk_dm(JH7110_SYSCLK_CPU_ROOT,
>> + starfive_clk_mux(priv->reg, "cpu_root",
>> + OFFSET(JH7110_SYSCLK_CPU_ROOT), 1,
>> + cpu_root_sels, ARRAY_SIZE(cpu_root_sels)));
>> + clk_dm(JH7110_SYSCLK_CPU_CORE,
>> + starfive_clk_divider(priv->reg,
>> + "cpu_core", "cpu_root",
>> + OFFSET(JH7110_SYSCLK_CPU_CORE), 3));
>> + clk_dm(JH7110_SYSCLK_CPU_BUS,
>> + starfive_clk_divider(priv->reg,
>> + "cpu_bus", "cpu_core",
>> + OFFSET(JH7110_SYSCLK_CPU_BUS), 2));
>> + clk_dm(JH7110_SYSCLK_GMACUSB_ROOT,
>> + starfive_clk_fix_factor(priv->reg,
>> + "gmacusb_root", "pll0_out", 1, 1));
>> + clk_dm(JH7110_SYSCLK_PERH_ROOT,
>> + starfive_clk_composite(priv->reg,
>> + "perh_root",
>> + perh_root_sels, ARRAY_SIZE(perh_root_sels),
>> + OFFSET(JH7110_SYSCLK_PERH_ROOT), 1, 0, 2));
>> + clk_dm(JH7110_SYSCLK_BUS_ROOT,
>> + starfive_clk_mux(priv->reg, "bus_root",
>> + OFFSET(JH7110_SYSCLK_BUS_ROOT), 1,
>> + bus_root_sels, ARRAY_SIZE(bus_root_sels)));
>> + clk_dm(JH7110_SYSCLK_AXI_CFG0,
>> + starfive_clk_divider(priv->reg,
>> + "axi_cfg0", "bus_root",
>> + OFFSET(JH7110_SYSCLK_AXI_CFG0), 2));
>> + clk_dm(JH7110_SYSCLK_STG_AXIAHB,
>> + starfive_clk_divider(priv->reg,
>> + "stg_axiahb", "axi_cfg0",
>> + OFFSET(JH7110_SYSCLK_STG_AXIAHB), 2));
>> + clk_dm(JH7110_SYSCLK_AHB0,
>> + starfive_clk_gate(priv->reg,
>> + "ahb0", "stg_axiahb",
>> + OFFSET(JH7110_SYSCLK_AHB0)));
>> + clk_dm(JH7110_SYSCLK_AHB1,
>> + starfive_clk_gate(priv->reg,
>> + "ahb1", "stg_axiahb",
>> + OFFSET(JH7110_SYSCLK_AHB1)));
>> + clk_dm(JH7110_SYSCLK_APB_BUS_FUNC,
>> + starfive_clk_divider(priv->reg,
>> + "apb_bus_func", "stg_axiahb",
>> + OFFSET(JH7110_SYSCLK_APB_BUS_FUNC), 4));
>> + clk_dm(JH7110_SYSCLK_PCLK2_MUX_FUNC,
>> + starfive_clk_fix_factor(priv->reg,
>> + "pclk2_mux_func", "apb_bus_func", 1, 1));
>> + clk_dm(JH7110_SYSCLK_PCLK2_MUX,
>> + starfive_clk_fix_factor(priv->reg,
>> + "pclk2_mux", "pclk2_mux_func", 1, 1));
>> + clk_dm(JH7110_SYSCLK_APB_BUS,
>> + starfive_clk_fix_factor(priv->reg,
>> + "apb_bus", "pclk2_mux", 1, 1));
>> + clk_dm(JH7110_SYSCLK_APB0,
>> + starfive_clk_gate(priv->reg,
>> + "apb0", "apb_bus",
>> + OFFSET(JH7110_SYSCLK_APB0)));
>> + clk_dm(JH7110_SYSCLK_APB12,
>> + starfive_clk_fix_factor(priv->reg,
>> + "apb12", "apb_bus", 1, 1));
>> + clk_dm(JH7110_SYSCLK_AON_APB,
>> + starfive_clk_fix_factor(priv->reg,
>> + "aon_apb", "apb_bus_func", 1, 1));
>> + clk_dm(JH7110_SYSCLK_QSPI_AHB,
>> + starfive_clk_gate(priv->reg,
>> + "qspi_ahb", "ahb1",
>> + OFFSET(JH7110_SYSCLK_QSPI_AHB)));
>> + clk_dm(JH7110_SYSCLK_QSPI_APB,
>> + starfive_clk_gate(priv->reg,
>> + "qspi_apb", "apb12",
>> + OFFSET(JH7110_SYSCLK_QSPI_APB)));
>> + clk_dm(JH7110_SYSCLK_QSPI_REF_SRC,
>> + starfive_clk_divider(priv->reg,
>> + "qspi_ref_src", "gmacusb_root",
>> + OFFSET(JH7110_SYSCLK_QSPI_REF_SRC), 5));
>> + clk_dm(JH7110_SYSCLK_QSPI_REF,
>> + starfive_clk_composite(priv->reg,
>> + "qspi_ref",
>> + qspi_ref_sels, ARRAY_SIZE(qspi_ref_sels),
>> + OFFSET(JH7110_SYSCLK_QSPI_REF), 1, 1, 0));
>> + clk_dm(JH7110_SYSCLK_SDIO0_AHB,
>> + starfive_clk_gate(priv->reg,
>> + "sdio0_ahb", "ahb0",
>> + OFFSET(JH7110_SYSCLK_SDIO0_AHB)));
>> + clk_dm(JH7110_SYSCLK_SDIO1_AHB,
>> + starfive_clk_gate(priv->reg,
>> + "sdio1_ahb", "ahb0",
>> + OFFSET(JH7110_SYSCLK_SDIO1_AHB)));
>> + clk_dm(JH7110_SYSCLK_SDIO0_SDCARD,
>> + starfive_clk_fix_parent_composite(priv->reg,
>> + "sdio0_sdcard", "axi_cfg0",
>> + OFFSET(JH7110_SYSCLK_SDIO0_SDCARD), 0, 1, 4));
>> + clk_dm(JH7110_SYSCLK_SDIO1_SDCARD,
>> + starfive_clk_fix_parent_composite(priv->reg,
>> + "sdio1_sdcard", "axi_cfg0",
>> + OFFSET(JH7110_SYSCLK_SDIO1_SDCARD), 0, 1, 4));
>> + clk_dm(JH7110_SYSCLK_USB_125M,
>> + starfive_clk_divider(priv->reg,
>> + "usb_125m", "gmacusb_root",
>> + OFFSET(JH7110_SYSCLK_USB_125M), 4));
>> + clk_dm(JH7110_SYSCLK_GMAC1_AHB,
>> + starfive_clk_gate(priv->reg,
>> + "gmac1_ahb", "ahb0",
>> + OFFSET(JH7110_SYSCLK_GMAC1_AHB)));
>> + clk_dm(JH7110_SYSCLK_GMAC1_AXI,
>> + starfive_clk_gate(priv->reg,
>> + "gmac1_axi", "stg_axiahb",
>> + OFFSET(JH7110_SYSCLK_GMAC1_AXI)));
>> + clk_dm(JH7110_SYSCLK_GMAC_SRC,
>> + starfive_clk_divider(priv->reg,
>> + "gmac_src", "gmacusb_root",
>> + OFFSET(JH7110_SYSCLK_GMAC_SRC), 3));
>> + clk_dm(JH7110_SYSCLK_GMAC1_GTXCLK,
>> + starfive_clk_divider(priv->reg,
>> + "gmac1_gtxclk", "gmacusb_root",
>> + OFFSET(JH7110_SYSCLK_GMAC1_GTXCLK), 4));
>> + clk_dm(JH7110_SYSCLK_GMAC1_GTXC,
>> + starfive_clk_gate(priv->reg,
>> + "gmac1_gtxc", "gmac1_gtxclk",
>> + OFFSET(JH7110_SYSCLK_GMAC1_GTXC)));
>> + clk_dm(JH7110_SYSCLK_GMAC1_RMII_RTX,
>> + starfive_clk_divider(priv->reg,
>> + "gmac1_rmii_rtx", "gmac1_rmii_refin",
>> + OFFSET(JH7110_SYSCLK_GMAC1_RMII_RTX), 5));
>> + clk_dm(JH7110_SYSCLK_GMAC1_PTP,
>> + starfive_clk_gate_divider(priv->reg,
>> + "gmac1_ptp", "gmac_src",
>> + OFFSET(JH7110_SYSCLK_GMAC1_PTP), 5));
>> + clk_dm(JH7110_SYSCLK_GMAC1_TX,
>> + starfive_clk_composite(priv->reg,
>> + "gmac1_tx",
>> + gmac1_tx_sels, ARRAY_SIZE(gmac1_tx_sels),
>> + OFFSET(JH7110_SYSCLK_GMAC1_TX), 1, 1, 0));
>> + clk_dm(JH7110_SYSCLK_AON_AHB,
>> + starfive_clk_fix_factor(priv->reg, "aon_ahb",
>> + "stg_axiahb", 1, 1));
>> + clk_dm(JH7110_SYSCLK_GMAC0_GTXCLK,
>> + starfive_clk_gate_divider(priv->reg,
>> + "gmac0_gtxclk", "gmacusb_root",
>> + OFFSET(JH7110_SYSCLK_GMAC0_GTXCLK), 4));
>> + clk_dm(JH7110_SYSCLK_GMAC0_PTP,
>> + starfive_clk_gate_divider(priv->reg,
>> + "gmac0_ptp", "gmac_src",
>> + OFFSET(JH7110_SYSCLK_GMAC0_PTP), 5));
>> + clk_dm(JH7110_SYSCLK_GMAC0_GTXC,
>> + starfive_clk_gate(priv->reg,
>> + "gmac0_gtxc", "gmac0_gtxclk",
>> + OFFSET(JH7110_SYSCLK_GMAC0_GTXC)));
>> + clk_dm(JH7110_SYSCLK_UART0_APB,
>> + starfive_clk_gate(priv->reg,
>> + "uart0_apb", "apb0",
>> + OFFSET(JH7110_SYSCLK_UART0_APB)));
>> + clk_dm(JH7110_SYSCLK_UART0_CORE,
>> + starfive_clk_gate(priv->reg,
>> + "uart0_core", "osc",
>> + OFFSET(JH7110_SYSCLK_UART0_CORE)));
>> + clk_dm(JH7110_SYSCLK_UART1_APB,
>> + starfive_clk_gate(priv->reg,
>> + "uart1_apb", "apb0",
>> + OFFSET(JH7110_SYSCLK_UART1_APB)));
>> + clk_dm(JH7110_SYSCLK_UART1_CORE,
>> + starfive_clk_gate(priv->reg,
>> + "uart1_core", "osc",
>> + OFFSET(JH7110_SYSCLK_UART1_CORE)));
>> + clk_dm(JH7110_SYSCLK_UART2_APB,
>> + starfive_clk_gate(priv->reg,
>> + "uart2_apb", "apb0",
>> + OFFSET(JH7110_SYSCLK_UART2_APB)));
>> + clk_dm(JH7110_SYSCLK_UART2_CORE,
>> + starfive_clk_gate(priv->reg,
>> + "uart2_core", "osc",
>> + OFFSET(JH7110_SYSCLK_UART2_CORE)));
>> + clk_dm(JH7110_SYSCLK_UART3_APB,
>> + starfive_clk_gate(priv->reg,
>> + "uart3_apb", "apb0",
>> + OFFSET(JH7110_SYSCLK_UART3_APB)));
>> + clk_dm(JH7110_SYSCLK_UART3_CORE,
>> + starfive_clk_gate_divider(priv->reg,
>> + "uart3_core", "perh_root",
>> + OFFSET(JH7110_SYSCLK_UART3_CORE), 8));
>> + clk_dm(JH7110_SYSCLK_UART4_APB,
>> + starfive_clk_gate(priv->reg,
>> + "uart4_apb", "apb0",
>> + OFFSET(JH7110_SYSCLK_UART4_APB)));
>> + clk_dm(JH7110_SYSCLK_UART4_CORE,
>> + starfive_clk_gate_divider(priv->reg,
>> + "uart4_core", "perh_root",
>> + OFFSET(JH7110_SYSCLK_UART4_CORE), 8));
>> + clk_dm(JH7110_SYSCLK_UART5_APB,
>> + starfive_clk_gate(priv->reg,
>> + "uart5_apb", "apb0",
>> + OFFSET(JH7110_SYSCLK_UART5_APB)));
>> + clk_dm(JH7110_SYSCLK_UART5_CORE,
>> + starfive_clk_gate_divider(priv->reg,
>> + "uart5_core", "perh_root",
>> + OFFSET(JH7110_SYSCLK_UART5_CORE), 8));
>> + clk_dm(JH7110_SYSCLK_I2C5_APB,
>> + starfive_clk_gate(priv->reg,
>> + "i2c5_apb", "apb12",
>> + OFFSET(JH7110_SYSCLK_I2C5_APB)));
>> + clk_dm(JH7110_SYSCLK_I2C5_CORE,
>> + starfive_clk_fix_factor(priv->reg,
>> + "i2c5_core", "i2c5_apb", 1, 1));
>> +
>> + return 0;
>> +}
>
> Last time you said that these had to be probed in a particular order.
> If that is the case, you need to enforce it. An easy way is to get the
> clock parents (which are in your device tree but not used by this
> driver), which will ensure that the parent gets probed.
>
>> +static int jh7110_aoncrg_init(struct udevice *dev)
>> +{
>> + struct jh7110_clk_priv *priv = dev_get_priv(dev);
>> +
>> + clk_dm(JH7110_AONCLK_GMAC0_AHB,
>> + starfive_clk_gate(priv->reg,
>> + "gmac0_ahb", "aon_ahb",
>> + AONOFFSET(JH7110_AONCLK_GMAC0_AHB)));
>> + clk_dm(JH7110_AONCLK_GMAC0_AXI,
>> + starfive_clk_gate(priv->reg,
>> + "gmac0_axi", "aon_ahb",
>> + AONOFFSET(JH7110_AONCLK_GMAC0_AXI)));
>> + clk_dm(JH7110_AONCLK_GMAC0_RMII_RTX,
>> + starfive_clk_divider(priv->reg,
>> + "gmac0_rmii_rtx", "gmac0_rmii_refin",
>> + AONOFFSET(JH7110_AONCLK_GMAC0_RMII_RTX), 5));
>> + clk_dm(JH7110_AONCLK_GMAC0_TX,
>> + starfive_clk_composite(priv->reg,
>> + "gmac0_tx", gmac0_tx_sels,
>> + ARRAY_SIZE(gmac0_tx_sels),
>> + AONOFFSET(JH7110_AONCLK_GMAC0_TX), 1, 1, 0));
>> + clk_dm(JH7110_AONCLK_OTPC_APB,
>> + starfive_clk_gate(priv->reg,
>> + "otpc_apb", "aon_apb",
>> + AONOFFSET(JH7110_AONCLK_OTPC_APB)));
>> +
>> + return 0;
>> +}
>> +
>> +static int jh7110_stgcrg_init(struct udevice *dev)
>> +{
>> + struct jh7110_clk_priv *priv = dev_get_priv(dev);
>> +
>> + clk_dm(JH7110_STGCLK_STG_APB,
>> + starfive_clk_fix_factor(priv->reg,
>> + "stg_apb", "apb_bus", 1, 1));
>> + clk_dm(JH7110_STGCLK_USB_APB,
>> + starfive_clk_gate(priv->reg,
>> + "usb_apb", "stg_apb",
>> + STGOFFSET(JH7110_STGCLK_USB_APB)));
>> + clk_dm(JH7110_STGCLK_USB_UTMI_APB,
>> + starfive_clk_gate(priv->reg,
>> + "usb_utmi_apb", "stg_apb",
>> + STGOFFSET(JH7110_STGCLK_USB_UTMI_APB)));
>> + clk_dm(JH7110_STGCLK_USB_AXI,
>> + starfive_clk_gate(priv->reg,
>> + "usb_axi", "stg_axiahb",
>> + STGOFFSET(JH7110_STGCLK_USB_AXI)));
>> + clk_dm(JH7110_STGCLK_USB_LPM,
>> + starfive_clk_gate_divider(priv->reg,
>> + "usb_lpm", "osc",
>> + STGOFFSET(JH7110_STGCLK_USB_LPM), 2));
>> + clk_dm(JH7110_STGCLK_USB_STB,
>> + starfive_clk_gate_divider(priv->reg,
>> + "usb_stb", "osc",
>> + STGOFFSET(JH7110_STGCLK_USB_STB), 3));
>> + clk_dm(JH7110_STGCLK_USB_APP_125,
>> + starfive_clk_gate(priv->reg,
>> + "usb_app_125", "usb_125m",
>> + STGOFFSET(JH7110_STGCLK_USB_APP_125)));
>> + clk_dm(JH7110_STGCLK_USB_REFCLK,
>> + starfive_clk_divider(priv->reg, "usb_refclk", "osc",
>> + STGOFFSET(JH7110_STGCLK_USB_REFCLK), 2));
>> + return 0;
>> +}
>> +
>> +static int jh7110_clk_probe(struct udevice *dev)
>> +{
>> + struct jh7110_clk_priv *priv = dev_get_priv(dev);
>> +
>> + priv->init = (jh1710_init_fn)dev_get_driver_data(dev);
>> + priv->reg = (void __iomem *)dev_read_addr_ptr(dev);
>> +
>> + if (priv->init)
>> + return priv->init(dev);
>> +
>> + return 0;
>> +}
>> +
>> +static int jh7110_clk_bind(struct udevice *dev)
>> +{
>> + /* The reset driver does not have a device node, so bind it here */
>> + return device_bind_driver_to_node(dev, "jh7110_reset", dev->name,
>> + dev_ofnode(dev), NULL);
>
> This will get called for syscrg, stgcrg, and aoncrg. Is that
> intentional?
>
All resets control and clocks control share the same base address, so reset control does not
have an independent device tree node, and shares a device tree node with clock control.
JH7110 is designed in this way and cannot be modified temporarily.
>> +}
>> +
>> +static const struct udevice_id jh7110_clk_of_match[] = {
>> + { .compatible = "starfive,jh7110-syscrg",
>> + .data = (ulong)&jh7110_syscrg_init
>> + },
>> + { .compatible = "starfive,jh7110-stgcrg",
>> + .data = (ulong)&jh7110_stgcrg_init
>> + },
>> + { .compatible = "starfive,jh7110-aoncrg",
>> + .data = (ulong)&jh7110_aoncrg_init
>> + },
>> + { }
>> +};
>> +
>> +U_BOOT_DRIVER(jh7110_clk) = {
>> + .name = "jh7110_clk",
>> + .id = UCLASS_CLK,
>> + .of_match = jh7110_clk_of_match,
>> + .probe = jh7110_clk_probe,
>> + .ops = &ccf_clk_ops,
>> + .priv_auto = sizeof(struct jh7110_clk_priv),
>> + .bind = jh7110_clk_bind,
>> +};
>> diff --git a/drivers/clk/starfive/clk.h b/drivers/clk/starfive/clk.h
>> new file mode 100644
>> index 0000000000..eb158e6517
>> --- /dev/null
>> +++ b/drivers/clk/starfive/clk.h
>> @@ -0,0 +1,60 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +/*
>> + * Copyright (C) 2022 Starfive, Inc.
>> + * Author: Yanhong Wang <yanhong.wang at starfivetech.com>
>> + *
>> + */
>> +
>> +#ifndef __CLK_STARFIVE_H
>> +#define __CLK_STARFIVE_H
>> +
>> +enum starfive_pll_type {
>> + PLL0 = 0,
>> + PLL1,
>> + PLL2,
>> + PLL_MAX = PLL2
>> +};
>> +
>> +struct starfive_pllx_rate {
>> + u64 rate;
>> + u32 prediv;
>> + u32 fbdiv;
>> + u32 frac;
>> + u32 postdiv1;
>> + u32 dacpd;
>> + u32 dsmpd;
>> +};
>> +
>> +struct starfive_pllx_offset {
>> + u32 pd;
>> + u32 prediv;
>> + u32 fbdiv;
>> + u32 frac;
>> + u32 postdiv1;
>> + u32 dacpd;
>> + u32 dsmpd;
>> + u32 pd_mask;
>> + u32 prediv_mask;
>> + u32 fbdiv_mask;
>> + u32 frac_mask;
>> + u32 postdiv1_mask;
>> + u32 dacpd_mask;
>> + u32 dsmpd_mask;
>> +};
>> +
>> +struct starfive_pllx_clk {
>> + enum starfive_pll_type type;
>> + const struct starfive_pllx_offset *offset;
>> + const struct starfive_pllx_rate *rate_table;
>> + int rate_count;
>> + int flags;
>> +};
>> +
>> +extern struct starfive_pllx_clk starfive_jh7110_pll0;
>> +extern struct starfive_pllx_clk starfive_jh7110_pll1;
>> +extern struct starfive_pllx_clk starfive_jh7110_pll2;
>> +
>> +struct clk *starfive_jh7110_pll(const char *name, const char *parent_name,
>> + void __iomem *base, void __iomem *sysreg,
>> + const struct starfive_pllx_clk *pll_clk);
>> +#endif
>
More information about the U-Boot
mailing list