[PATCH v4 09/10] usb: dwc3-uniphier: Use dwc3-generic instead of xhci-dwc3

Kunihiko Hayashi hayashi.kunihiko at socionext.com
Mon Feb 20 06:50:33 CET 2023


dwc3-uniphier depends on xhci-dwc3 framework, however, it is preferable
to use dwc3-generic.

This driver calls the exported dwc3-generic functions and redefine
the SoC-dependent operations to fit dwc3-generic.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
Reviewed-by: Marek Vasut <marex at denx.de>
---
 drivers/usb/dwc3/Kconfig         |   4 +-
 drivers/usb/dwc3/dwc3-uniphier.c | 116 ++++++++++++++++++++-----------
 2 files changed, 78 insertions(+), 42 deletions(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index f010291d02..7ddfa94e51 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -55,7 +55,9 @@ config USB_DWC3_MESON_GXL
 
 config USB_DWC3_UNIPHIER
 	bool "DesignWare USB3 Host Support on UniPhier Platforms"
-	depends on ARCH_UNIPHIER && USB_XHCI_DWC3
+	depends on ARCH_UNIPHIER && USB_DWC3
+	select USB_DWC3_GENERIC
+	select PHY_UNIPHIER_USB3
 	help
 	  Support of USB2/3 functionality in Socionext UniPhier platforms.
 	  Say 'Y' here if you have one such device.
diff --git a/drivers/usb/dwc3/dwc3-uniphier.c b/drivers/usb/dwc3/dwc3-uniphier.c
index 54b52dcd66..ab85428a70 100644
--- a/drivers/usb/dwc3/dwc3-uniphier.c
+++ b/drivers/usb/dwc3/dwc3-uniphier.c
@@ -4,14 +4,17 @@
  *
  * Copyright (C) 2016-2017 Socionext Inc.
  *   Author: Masahiro Yamada <yamada.masahiro at socionext.com>
+ *   Author: Kunihiko Hayashi <hayashi.kunihiko at socionext.com>
  */
 
 #include <dm.h>
-#include <dm/device_compat.h>
+#include <dm/lists.h>
 #include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/io.h>
-#include <linux/sizes.h>
+#include <linux/usb/gadget.h>
+
+#include "core.h"
+#include "gadget.h"
+#include "dwc3-generic.h"
 
 #define UNIPHIER_PRO4_DWC3_RESET	0x40
 #define   UNIPHIER_PRO4_DWC3_RESET_XIOMMU	BIT(5)
@@ -27,8 +30,11 @@
 #define UNIPHIER_PXS2_DWC3_RESET	0x00
 #define   UNIPHIER_PXS2_DWC3_RESET_XLINK	BIT(15)
 
-static int uniphier_pro4_dwc3_init(void __iomem *regs)
+static void uniphier_pro4_dwc3_init(struct udevice *dev, int index,
+				    enum usb_dr_mode mode)
 {
+	struct dwc3_glue_data *glue = dev_get_plat(dev);
+	void *regs = map_physmem(glue->regs, glue->size, MAP_NOCACHE);
 	u32 tmp;
 
 	tmp = readl(regs + UNIPHIER_PRO4_DWC3_RESET);
@@ -36,11 +42,14 @@ static int uniphier_pro4_dwc3_init(void __iomem *regs)
 	tmp |= UNIPHIER_PRO4_DWC3_RESET_XIOMMU | UNIPHIER_PRO4_DWC3_RESET_XLINK;
 	writel(tmp, regs + UNIPHIER_PRO4_DWC3_RESET);
 
-	return 0;
+	unmap_physmem(regs, MAP_NOCACHE);
 }
 
-static int uniphier_pro5_dwc3_init(void __iomem *regs)
+static void uniphier_pro5_dwc3_init(struct udevice *dev, int index,
+				    enum usb_dr_mode mode)
 {
+	struct dwc3_glue_data *glue = dev_get_plat(dev);
+	void *regs = map_physmem(glue->regs, glue->size, MAP_NOCACHE);
 	u32 tmp;
 
 	tmp = readl(regs + UNIPHIER_PRO5_DWC3_RESET);
@@ -49,72 +58,97 @@ static int uniphier_pro5_dwc3_init(void __iomem *regs)
 	tmp |= UNIPHIER_PRO5_DWC3_RESET_XLINK | UNIPHIER_PRO5_DWC3_RESET_XIOMMU;
 	writel(tmp, regs + UNIPHIER_PRO5_DWC3_RESET);
 
-	return 0;
+	unmap_physmem(regs, MAP_NOCACHE);
 }
 
-static int uniphier_pxs2_dwc3_init(void __iomem *regs)
+static void uniphier_pxs2_dwc3_init(struct udevice *dev, int index,
+				    enum usb_dr_mode mode)
 {
+	struct dwc3_glue_data *glue = dev_get_plat(dev);
+	void *regs = map_physmem(glue->regs, glue->size, MAP_NOCACHE);
 	u32 tmp;
 
 	tmp = readl(regs + UNIPHIER_PXS2_DWC3_RESET);
 	tmp |= UNIPHIER_PXS2_DWC3_RESET_XLINK;
 	writel(tmp, regs + UNIPHIER_PXS2_DWC3_RESET);
 
-	return 0;
+	unmap_physmem(regs, MAP_NOCACHE);
 }
 
-static int uniphier_dwc3_probe(struct udevice *dev)
+static int dwc3_uniphier_glue_get_ctrl_dev(struct udevice *dev, ofnode *node)
 {
-	fdt_addr_t base;
-	void __iomem *regs;
-	int (*init)(void __iomem *regs);
-	int ret;
+	struct udevice *child;
+	const char *name;
+	ofnode subnode;
+
+	/*
+	 * "controller reset" belongs to glue logic, and it should be
+	 * accessible in .glue_configure() before access to the controller
+	 * begins.
+	 */
+	ofnode_for_each_subnode(subnode, dev_ofnode(dev)) {
+		name = ofnode_get_name(subnode);
+		if (!strncmp(name, "reset", 5))
+			device_bind_driver_to_node(dev, "uniphier-reset",
+						   name, subnode, &child);
+	}
+
+	/* Get controller node that is placed separately from the glue node */
+	*node = ofnode_by_compatible(dev_ofnode(dev->parent),
+				     "socionext,uniphier-dwc3");
 
-	base = dev_read_addr(dev);
-	if (base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	regs = ioremap(base, SZ_32K);
-	if (!regs)
-		return -ENOMEM;
+	return 0;
+}
 
-	init = (typeof(init))dev_get_driver_data(dev);
-	ret = init(regs);
-	if (ret)
-		dev_err(dev, "failed to init glue layer\n");
+static const struct dwc3_glue_ops uniphier_pro4_dwc3_ops = {
+	.glue_get_ctrl_dev = dwc3_uniphier_glue_get_ctrl_dev,
+	.glue_configure = uniphier_pro4_dwc3_init,
+};
 
-	iounmap(regs);
+static const struct dwc3_glue_ops uniphier_pro5_dwc3_ops = {
+	.glue_get_ctrl_dev = dwc3_uniphier_glue_get_ctrl_dev,
+	.glue_configure = uniphier_pro5_dwc3_init,
+};
 
-	return ret;
-}
+static const struct dwc3_glue_ops uniphier_pxs2_dwc3_ops = {
+	.glue_get_ctrl_dev = dwc3_uniphier_glue_get_ctrl_dev,
+	.glue_configure = uniphier_pxs2_dwc3_init,
+};
 
 static const struct udevice_id uniphier_dwc3_match[] = {
 	{
-		.compatible = "socionext,uniphier-pro4-dwc3",
-		.data = (ulong)uniphier_pro4_dwc3_init,
+		.compatible = "socionext,uniphier-pro4-dwc3-glue",
+		.data = (ulong)&uniphier_pro4_dwc3_ops,
+	},
+	{
+		.compatible = "socionext,uniphier-pro5-dwc3-glue",
+		.data = (ulong)&uniphier_pro5_dwc3_ops,
 	},
 	{
-		.compatible = "socionext,uniphier-pro5-dwc3",
-		.data = (ulong)uniphier_pro5_dwc3_init,
+		.compatible = "socionext,uniphier-pxs2-dwc3-glue",
+		.data = (ulong)&uniphier_pxs2_dwc3_ops,
 	},
 	{
-		.compatible = "socionext,uniphier-pxs2-dwc3",
-		.data = (ulong)uniphier_pxs2_dwc3_init,
+		.compatible = "socionext,uniphier-ld20-dwc3-glue",
+		.data = (ulong)&uniphier_pxs2_dwc3_ops,
 	},
 	{
-		.compatible = "socionext,uniphier-ld20-dwc3",
-		.data = (ulong)uniphier_pxs2_dwc3_init,
+		.compatible = "socionext,uniphier-pxs3-dwc3-glue",
+		.data = (ulong)&uniphier_pxs2_dwc3_ops,
 	},
 	{
-		.compatible = "socionext,uniphier-pxs3-dwc3",
-		.data = (ulong)uniphier_pxs2_dwc3_init,
+		.compatible = "socionext,uniphier-nx1-dwc3-glue",
+		.data = (ulong)&uniphier_pxs2_dwc3_ops,
 	},
 	{ /* sentinel */ }
 };
 
-U_BOOT_DRIVER(usb_xhci) = {
+U_BOOT_DRIVER(dwc3_uniphier_wrapper) = {
 	.name = "uniphier-dwc3",
 	.id = UCLASS_SIMPLE_BUS,
 	.of_match = uniphier_dwc3_match,
-	.probe = uniphier_dwc3_probe,
+	.bind = dwc3_glue_bind,
+	.probe = dwc3_glue_probe,
+	.remove = dwc3_glue_remove,
+	.plat_auto = sizeof(struct dwc3_glue_data),
 };
-- 
2.25.1



More information about the U-Boot mailing list