[PATCH v3] Let the EQoS in imx8mp handle fixed-phy too.

[Elmar Psilog]

Without that patch it lost track to the node to scan
speed and duplex.
Patch was created by Marek Vasut, just tested by me.

Signed-off-by: Elmar Psilog <epsi at gmx.de>
Reviewed-by: Marek Vasut <marex at denx.de>
---
  changes v2: fix format issues
  changes v3: remove {} around single if, add reviewd..

 drivers/net/dwc_eth_qos.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/drivers/net/dwc_eth_qos.c b/drivers/net/dwc_eth_qos.c
index 112deb546d..b9de205b8a 100644
--- a/drivers/net/dwc_eth_qos.c
+++ b/drivers/net/dwc_eth_qos.c
@@ -788,9 +788,21 @@ static int eqos_start(struct udevice *dev)
 	 */
 	if (!eqos->phy) {
 		int addr = -1;
-		addr = eqos_get_phy_addr(eqos, dev);
-		eqos->phy = phy_connect(eqos->mii, addr, dev,
-					eqos->config->interface(dev));
+		ofnode fixed_node;
+
+		if (IS_ENABLED(CONFIG_PHY_FIXED)) {
+			fixed_node = ofnode_find_subnode(dev_ofnode(dev),
+							 "fixed-link");
+			if (ofnode_valid(fixed_node))
+				eqos->phy = fixed_phy_create(dev_ofnode(dev));
+		}
+
+		if (!eqos->phy) {
+			addr = eqos_get_phy_addr(eqos, dev);
+			eqos->phy = phy_connect(eqos->mii, addr, dev,
+						eqos->config->interface(dev));
+		}
+
 		if (!eqos->phy) {
 			pr_err("phy_connect() failed");
 			goto err_stop_resets;
--
2.34.1