[PATCH RFC u-boot-mvebu 30/59] cmd: mvebu/bubt: Enable command by default

[Pali Rohár]

This makes updating of u-boot/firmware on Marvell boards easier.

Signed-off-by: Pali Rohár <pali at kernel.org>
---
 cmd/mvebu/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/cmd/mvebu/Kconfig b/cmd/mvebu/Kconfig
index 029f722096b1..e83a98294912 100644
--- a/cmd/mvebu/Kconfig
+++ b/cmd/mvebu/Kconfig
@@ -3,6 +3,7 @@ depends on ARCH_MVEBU
 
 config CMD_MVEBU_BUBT
 	bool "bubt"
+	default y
 	select SHA256 if ARMADA_3700
 	select SHA512 if ARMADA_3700
 	select DOS_PARTITION if ARMADA_3700
-- 
2.20.1