[PATCH v1 00/24] CONFIG_IS_ENABLED vs IS_ENABLED
Troy Kisky
troykiskyboundary at gmail.com
Wed Feb 22 02:37:57 CET 2023
This patch set gets ready to checks the usage of
CONFIG_IS_ENABLED/IS_ENABLED.
After the set has been applied, you can delete
test/usage_of_is_enabled_todo.txt
and run test/usage_of_is_enabled_commit.sh
The script test/usage_of_is_enabled_check.sh
checks for new questionable uses of
CONFIG_IS_ENABLED/IS_ENABLED and is added
to .azure-pipelines.yml, and
.gitlab-ci.yml
Troy Kisky (24):
cmd: nvedit: check for ENV_SUPPORT
lib: crc32: prepare for CONFIG_IS_ENABLED changes
lib: md5: prepare for CONFIG_IS_ENABLED changes
lib: sha1: prepare for CONFIG_IS_ENABLED changes
lib: sha256: prepare for CONFIG_IS_ENABLED changes
lib: sha512: prepare for CONFIG_IS_ENABLED changes
tools: prevent CONFIG_IS_ENABLED errors by including linux/kconfig.h
tools: Makefile: prepare for CONFIG_IS_ENABLED changes by adding
CONFIG_TOOLS_xxx
x86: cpu: qemu: qemu: remove SPL use with CONFIG_IS_ENABLED
config_distro_bootcmd: remove booting environment variables from SPL
environment
ofnode: fdt_support definitions needed if OF_CONTROL is enabled
ringneck-px30: remove check for ENV_IS_NOWHERE, it is an SPL config
puma-rk3399: remove check for ENV_IS_NOWHERE, it is an SPL config
fdt_support: always define fdt_fixup_mtdparts
m53menlo: define ft_board_setup only if CONFIG_IS_ENABLED(OF_LIBFDT)
freescale: common: pfuze: define pfuze_mode_init only if
defined(CONFIG_DM_PMIC)
ns16550: match when to define bdf with uart code
solidrun: mx6cuboxi: use CONFIG_IS_ENABLED(SATA) instead of
CONFIG_CMD_SATA
arm: mach-imx: use CONFIG_$(SPL_)SATA instead of CONFIG_SATA
x86: cpu: i386: cpu: only set pci_ram_top if CONFIG_IS_ENABLED(PCI)
gateworks: venice: surround call of setup_fec with if
IS_ENABLED(CONFIG_NET)
power: pmic: add dm style definitions if not
CONFIG_IS_ENABLED(POWER_LEGACY)
arm: cpu: armv7: ls102xa: fdt: remove eth_device support
CI: add test/usage_of_is_enabled_check.sh
.azure-pipelines.yml | 11 +
.gitlab-ci.yml | 5 +
arch/arm/cpu/armv7/ls102xa/fdt.c | 12 -
arch/arm/mach-imx/Makefile | 2 +-
arch/x86/cpu/apollolake/uart.c | 6 +-
arch/x86/cpu/i386/cpu.c | 2 +
arch/x86/cpu/qemu/qemu.c | 2 +-
board/freescale/common/pfuze.c | 2 +-
board/gateworks/venice/venice.c | 4 +-
board/menlo/m53menlo/m53menlo.c | 2 +
board/solidrun/mx6cuboxi/mx6cuboxi.c | 2 +-
.../puma_rk3399/puma-rk3399.c | 4 -
.../ringneck_px30/ringneck-px30.c | 4 -
boot/fdt_region.c | 1 +
cmd/nvedit.c | 5 +-
include/config_distro_bootcmd.h | 23 ++
include/fdt_support.h | 26 ++-
include/ns16550.h | 2 +-
include/power/pmic.h | 2 +-
lib/crc32.c | 12 +-
lib/fdtdec_common.c | 1 +
lib/hash-checksum.c | 1 +
lib/md5.c | 9 +-
lib/sha1.c | 8 +-
lib/sha256.c | 8 +-
lib/sha512.c | 12 +-
test/usage_of_is_enabled_check.sh | 19 ++
test/usage_of_is_enabled_commit.sh | 12 +
test/usage_of_is_enabled_correct.sh | 50 +++++
test/usage_of_is_enabled_exempt.txt | 9 +
test/usage_of_is_enabled_list.sh | 86 +++++++
test/usage_of_is_enabled_splcfg.txt | 21 ++
test/usage_of_is_enabled_todo.txt | 210 ++++++++++++++++++
tools/Makefile | 2 +
tools/env/fw_env.c | 1 +
tools/fdt_host.h | 1 +
tools/mkimage.h | 1 +
37 files changed, 524 insertions(+), 56 deletions(-)
create mode 100755 test/usage_of_is_enabled_check.sh
create mode 100755 test/usage_of_is_enabled_commit.sh
create mode 100755 test/usage_of_is_enabled_correct.sh
create mode 100644 test/usage_of_is_enabled_exempt.txt
create mode 100755 test/usage_of_is_enabled_list.sh
create mode 100644 test/usage_of_is_enabled_splcfg.txt
create mode 100644 test/usage_of_is_enabled_todo.txt
--
2.34.1
More information about the U-Boot
mailing list