[PATCH V2 6/9] rockchip: rk3568: enable automatic power savings
Kever Yang
kever.yang at rock-chips.com
Wed Feb 22 08:34:36 CET 2023
On 2023/2/14 06:27, Chris Morgan wrote:
> From: Chris Morgan <macromorgan at hotmail.com>
>
> It enables automatic clock gating on idle, disables the eDP phy by
> default, and sets the core pvtpll ring length. It is reported this
> lowers the temperature on at least one SoC by 7C.
>
> Signed-off-by: Peter Geis <pgwipeout at gmail.com>
> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>
Thanks,
- Kever
> ---
> arch/arm/mach-rockchip/rk3568/rk3568.c | 24 ++++++++++++++++++++++++
> 1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm/mach-rockchip/rk3568/rk3568.c b/arch/arm/mach-rockchip/rk3568/rk3568.c
> index a2d59abc26..4a08820a09 100644
> --- a/arch/arm/mach-rockchip/rk3568/rk3568.c
> +++ b/arch/arm/mach-rockchip/rk3568/rk3568.c
> @@ -24,6 +24,16 @@
> #define SGRF_SOC_CON4 0x10
> #define EMMC_HPROT_SECURE_CTRL 0x03
> #define SDMMC0_HPROT_SECURE_CTRL 0x01
> +
> +#define PMU_BASE_ADDR 0xfdd90000
> +#define PMU_NOC_AUTO_CON0 (0x70)
> +#define PMU_NOC_AUTO_CON1 (0x74)
> +#define EDP_PHY_GRF_BASE 0xfdcb0000
> +#define EDP_PHY_GRF_CON0 (EDP_PHY_GRF_BASE + 0x00)
> +#define EDP_PHY_GRF_CON10 (EDP_PHY_GRF_BASE + 0x28)
> +#define CPU_GRF_BASE 0xfdc30000
> +#define GRF_CORE_PVTPLL_CON0 (0x10)
> +
> /* PMU_GRF_GPIO0D_IOMUX_L */
> enum {
> GPIO0D1_SHIFT = 4,
> @@ -98,6 +108,20 @@ void board_debug_uart_init(void)
> int arch_cpu_init(void)
> {
> #ifdef CONFIG_SPL_BUILD
> + /*
> + * When perform idle operation, corresponding clock can
> + * be opened or gated automatically.
> + */
> + writel(0xffffffff, PMU_BASE_ADDR + PMU_NOC_AUTO_CON0);
> + writel(0x000f000f, PMU_BASE_ADDR + PMU_NOC_AUTO_CON1);
> +
> + /* Disable eDP phy by default */
> + writel(0x00070007, EDP_PHY_GRF_CON10);
> + writel(0x0ff10ff1, EDP_PHY_GRF_CON0);
> +
> + /* Set core pvtpll ring length */
> + writel(0x00ff002b, CPU_GRF_BASE + GRF_CORE_PVTPLL_CON0);
> +
> /* Set the emmc sdmmc0 to secure */
> rk_clrreg(SGRF_BASE + SGRF_SOC_CON4, (EMMC_HPROT_SECURE_CTRL << 11
> | SDMMC0_HPROT_SECURE_CTRL << 4));
More information about the U-Boot
mailing list