[RFC PATCH v1 3/9] clk: renesas: add R906G032 driver

[Ralph Siemsen]

Hi Sean,

I finally got around to posting v3 of this patch series. I wanted to
touch on a few issues you had mentioned in previous review.

On Fri, Aug 26, 2022 at 11:47 AM Ralph Siemsen <ralph.siemsen at linaro.org> wrote:
>
> On Tue, Aug 23, 2022 at 12:14:31AM -0400, Sean Anderson wrote:
> >>Regarding the unused fields (scon, mirack, mistat): I am not really
> >>sure what their purpose is. Maybe there is some value in having them.
> >>I'll try to find out more information about them. If we do decide to
> >>drop them, I would like to keep it synchronised with the Linux driver.
> >
> >OK, well if you don't use them then perhaps you can just leave them in
> >the macro but remove them from the struct. That way you can add support
> >for them later if you need to, but they don't take up space in the mean
> >time. A comment summarizing your explanation above would be helpful.

So I ended up doing as you suggested: keeping the values in the
tables, in case they are needed in the future, but omitting them from
the structure to save space.

> >>>DIV_ROUND_CLOSEST?
> >>
> >>I'm hesitant to change the logic on this, as it could subtly alter the values.
> >
> >Well if you have 2MHz divided by 3, the resulting rate is closer to
> >666667 kHz than 666666 Hz.

This could result in the chosen clock rate being higher than what was
requested. And in turn that could result in violating the spec of a
hardware device.

So I have kept the original logic here.

Regards
Ralph