[PATCH RFC u-boot-mvebu 20/59] cmd: mvebu/bubt: Add support for selecting eMMC HW partition

[Stefan Roese]

Hi Pali,

On 2/23/23 08:55, Pali Rohár wrote:

<snip>

>>>> This #ifdef usage really gets out of hand IMHO. Yes I know, you did not
>>>> introduce it here. Still, perhaps some of this can be moved to using
>>>> IS_ENABLED or CONFIG_IS_ENABLED instead?
>>>>
>>>> And I just checked that "bubt" is not compiled for CONFIG_BLK not
>>>> defined. So please depend this file on CONFIG_BLK in Kconfig and remove
>>>> the non CONFIG_BLK code here.
>>>
>>> bubt is used for at least 4 different mvebu platforms (AXP, A38x, A3720,
>>> A7K) and every one has slightly different code and configuration.
>>>
>>> I really do not know if all those configurations support CONFIG_BLK, so
>>> I decided to let it as it was before to eliminate possible issues.
>>
>> As mentioned above, I've checked this myself before sending the
>> suggestion yesterday. No platform compiling this cmd has CONFIG_BLK
>> disabled.
> 
> OK! In this case I would rather send an additional cleanup patch which
> removes usage of non-CONFIG_BLK code from the whole command. As it does
> not make sense to not-have it in MMC and have it in SATA.

Handling this via a follow-up patch is even better. Thanks for working
on this.

Thanks,
Stefan