[PATCH 1/4] starfive: pci: Add StarFive JH7110 pcie driver
Minda Chen
minda.chen at starfivetech.com
Thu Feb 23 11:52:37 CET 2023
From: Mason Huo <mason.huo at starfivetech.com>
Add pcie driver for StarFive JH7110, the driver depends on
starfive gpio, pinctrl, clk and reset driver to do init.
Several devices are tested:
a) M.2 NVMe SSD
b) Realtek 8169 Ethernet adapter.
Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
---
drivers/pci/Kconfig | 11 +
drivers/pci/Makefile | 1 +
drivers/pci/pcie_starfive_jh7110.c | 482 +++++++++++++++++++++++++++++
3 files changed, 494 insertions(+)
create mode 100644 drivers/pci/pcie_starfive_jh7110.c
diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig
index a3b662fb13..da9290204b 100644
--- a/drivers/pci/Kconfig
+++ b/drivers/pci/Kconfig
@@ -365,4 +365,15 @@ config PCIE_UNIPHIER
Say Y here if you want to enable PCIe controller support on
UniPhier SoCs.
+config PCIE_STARFIVE_JH7110
+ bool "Enable Starfive JH7110 PCIe driver"
+ depends on STARFIVE_JH7110
+ depends on PINCTRL_STARFIVE_JH7110
+ depends on CLK_JH7110
+ depends on RESET_JH7110
+ default y
+ help
+ Say Y here if you want to enable PCIe controller support on
+ StarFive JH7110 SoC.
+
endif
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile
index dd1ad91ced..92a92409ab 100644
--- a/drivers/pci/Makefile
+++ b/drivers/pci/Makefile
@@ -49,3 +49,4 @@ obj-$(CONFIG_PCI_OCTEONTX) += pci_octeontx.o
obj-$(CONFIG_PCIE_OCTEON) += pcie_octeon.o
obj-$(CONFIG_PCIE_DW_SIFIVE) += pcie_dw_sifive.o
obj-$(CONFIG_PCIE_UNIPHIER) += pcie_uniphier.o
+obj-$(CONFIG_PCIE_STARFIVE_JH7110) += pcie_starfive_jh7110.o
diff --git a/drivers/pci/pcie_starfive_jh7110.c b/drivers/pci/pcie_starfive_jh7110.c
new file mode 100644
index 0000000000..1f14352dfb
--- /dev/null
+++ b/drivers/pci/pcie_starfive_jh7110.c
@@ -0,0 +1,482 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * StarFive PLDA PCIe host controller driver
+ *
+ * Copyright (c) 2023 Starfive, Inc.
+ * Author: Mason Huo <mason.huo at starfivetech.com>
+ *
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <generic-phy.h>
+#include <pci.h>
+#include <power-domain.h>
+#include <regmap.h>
+#include <reset.h>
+#include <syscon.h>
+#include <asm/global_data.h>
+#include <asm/io.h>
+#include <asm-generic/gpio.h>
+#include <dm/device_compat.h>
+#include <dm/pinctrl.h>
+#include <linux/delay.h>
+#include <linux/iopoll.h>
+#include <power/regulator.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define GEN_SETTINGS 0x80
+#define PCIE_PCI_IDS 0x9C
+#define PCIE_WINROM 0xFC
+#define PMSG_SUPPORT_RX 0x3F0
+#define PCI_MISC 0xB4
+
+#define PLDA_EP_ENABLE 0
+#define PLDA_RP_ENABLE 1
+
+#define IDS_REVISION_ID 0x02
+#define IDS_PCI_TO_PCI_BRIDGE 0x060400
+#define IDS_CLASS_CODE_SHIFT 8
+
+#define PREF_MEM_WIN_64_SUPPORT BIT(3)
+#define PMSG_LTR_SUPPORT BIT(2)
+#define PLDA_FUNCTION_DIS BIT(15)
+#define PLDA_FUNC_NUM 4
+#define PLDA_PHY_FUNC_SHIFT 9
+
+#define XR3PCI_ATR_AXI4_SLV0 0x800
+#define XR3PCI_ATR_SRC_ADDR_LOW 0x0
+#define XR3PCI_ATR_SRC_ADDR_HIGH 0x4
+#define XR3PCI_ATR_TRSL_ADDR_LOW 0x8
+#define XR3PCI_ATR_TRSL_ADDR_HIGH 0xc
+#define XR3PCI_ATR_TRSL_PARAM 0x10
+#define XR3PCI_ATR_TABLE_OFFSET 0x20
+#define XR3PCI_ATR_MAX_TABLE_NUM 8
+
+#define XR3PCI_ATR_SRC_WIN_SIZE_SHIFT 1
+#define XR3PCI_ATR_SRC_ADDR_MASK 0xfffff000
+#define XR3PCI_ATR_TRSL_ADDR_MASK 0xfffff000
+#define XR3_PCI_ECAM_SIZE 28
+#define XR3PCI_ATR_TRSL_DIR BIT(22)
+/* IDs used in the XR3PCI_ATR_TRSL_PARAM */
+#define XR3PCI_ATR_TRSLID_PCIE_MEMORY 0x0
+#define XR3PCI_ATR_TRSLID_PCIE_CONFIG 0x1
+
+#define ECAM_BUS_SHIFT 20
+#define ECAM_DEV_SHIFT 15
+#define ECAM_FUNC_SHIFT 12
+/* Secondary bus number offset in config space */
+#define PCI_SECONDARY_BUS 0x19
+
+/* system control */
+#define STG_SYSCON_K_RP_NEP_SHIFT 8
+#define STG_SYSCON_K_RP_NEP_MASK 0x100
+#define STG_SYSCON_AXI4_SLVL_ARFUNC_MASK 0x7FFF00
+#define STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT 8
+#define STG_SYSCON_AXI4_SLVL_AWFUNC_MASK 0x7FFF
+#define STG_SYSCON_AXI4_SLVL_AWFUNC_SHIFT 0
+#define STG_SYSCON_CLKREQ_SHIFT 22
+#define STG_SYSCON_CLKREQ_MASK 0x400000
+#define STG_SYSCON_CKREF_SRC_SHIFT 18
+#define STG_SYSCON_CKREF_SRC_MASK 0xC0000
+
+struct starfive_pcie {
+ struct udevice *dev;
+
+ void __iomem *reg_base;
+ void __iomem *cfg_base;
+
+ struct regmap *regmap;
+ u32 stg_arfun;
+ u32 stg_awfun;
+ u32 stg_rp_nep;
+
+ struct clk_bulk clks;
+ struct reset_ctl_bulk rsts;
+
+ int atr_table_num;
+ int first_busno;
+};
+
+static int starfive_pcie_addr_valid(pci_dev_t bdf, int first_busno)
+{
+ if ((PCI_BUS(bdf) == first_busno) && (PCI_DEV(bdf) > 0))
+ return 0;
+ if ((PCI_BUS(bdf) == first_busno + 1) && (PCI_DEV(bdf) > 0))
+ return 0;
+
+ return 1;
+}
+
+static int starfive_pcie_off_conf(pci_dev_t bdf, uint offset)
+{
+ unsigned int bus = PCI_BUS(bdf);
+ unsigned int dev = PCI_DEV(bdf);
+ unsigned int func = PCI_FUNC(bdf);
+
+ return (bus << ECAM_BUS_SHIFT) | (dev << ECAM_DEV_SHIFT) |
+ (func << ECAM_FUNC_SHIFT) | offset;
+}
+
+static bool starfive_pcie_hide_rc_bar(pci_dev_t bdf, int offset)
+{
+ /* Only root port 1 is in use */
+ if ((PCI_BUS(bdf) == 0) &&
+ (offset == PCI_BASE_ADDRESS_0 || offset == PCI_BASE_ADDRESS_1))
+ return true;
+
+ return false;
+}
+
+static int starfive_pcie_conf_address(const struct udevice *udev, pci_dev_t bdf,
+ uint offset, void **paddr)
+{
+ struct starfive_pcie *priv = dev_get_priv(udev);
+ int where = starfive_pcie_off_conf(bdf, offset);
+
+ if (!starfive_pcie_addr_valid(bdf, priv->first_busno))
+ return -EINVAL;
+
+ *paddr = (void *)(priv->cfg_base + where);
+ return 0;
+}
+
+static int starfive_pcie_config_read(const struct udevice *udev, pci_dev_t bdf,
+ uint offset, ulong *valuep,
+ enum pci_size_t size)
+{
+ /* Make sure the LAST TLP is finished, before reading vendor ID. */
+ if (offset == PCI_VENDOR_ID)
+ mdelay(20);
+
+ return pci_generic_mmap_read_config(udev, starfive_pcie_conf_address,
+ bdf, offset, valuep, size);
+}
+
+int starfive_pcie_config_write(struct udevice *udev, pci_dev_t bdf,
+ uint offset, ulong value,
+ enum pci_size_t size)
+{
+ if (starfive_pcie_hide_rc_bar(bdf, offset))
+ return 0;
+
+ return pci_generic_mmap_write_config(udev, starfive_pcie_conf_address,
+ bdf, offset, value, size);
+}
+
+static int starfive_pcie_set_atr_entry(struct starfive_pcie *priv, phys_addr_t src_addr,
+ phys_addr_t trsl_addr, size_t window_size,
+ int trsl_param)
+{
+ void __iomem *base =
+ priv->reg_base + XR3PCI_ATR_AXI4_SLV0;
+
+ /* Support AXI4 Slave 0 Address Translation Tables 0-7. */
+ if (priv->atr_table_num >= XR3PCI_ATR_MAX_TABLE_NUM) {
+ dev_err(priv->dev, "ATR table number %d exceeds max num\n",
+ priv->atr_table_num);
+ return -EINVAL;
+ }
+ base += XR3PCI_ATR_TABLE_OFFSET * priv->atr_table_num;
+ priv->atr_table_num++;
+
+ /* X3PCI_ATR_SRC_ADDR_LOW:
+ * - bit 0: enable entry,
+ * - bits 1-6: ATR window size: total size in bytes: 2^(ATR_WSIZE + 1)
+ * - bits 7-11: reserved
+ * - bits 12-31: start of source address
+ */
+ writel((lower_32_bits(src_addr) & XR3PCI_ATR_SRC_ADDR_MASK) |
+ (fls(window_size) - 1) << XR3PCI_ATR_SRC_WIN_SIZE_SHIFT | 1,
+ base + XR3PCI_ATR_SRC_ADDR_LOW);
+ writel(upper_32_bits(src_addr), base + XR3PCI_ATR_SRC_ADDR_HIGH);
+ writel((lower_32_bits(trsl_addr) & XR3PCI_ATR_TRSL_ADDR_MASK),
+ base + XR3PCI_ATR_TRSL_ADDR_LOW);
+ writel(upper_32_bits(trsl_addr), base + XR3PCI_ATR_TRSL_ADDR_HIGH);
+ writel(trsl_param, base + XR3PCI_ATR_TRSL_PARAM);
+
+ dev_dbg(priv->dev, "ATR entry: 0x%010llx %s 0x%010llx [0x%010llx] (param: 0x%06x)\n",
+ src_addr, (trsl_param & XR3PCI_ATR_TRSL_DIR) ? "<-" : "->",
+ trsl_addr, (u64)window_size, trsl_param);
+ return 0;
+}
+
+static int starfive_pcie_atr_init(struct starfive_pcie *priv)
+{
+ struct udevice *ctlr = pci_get_controller(priv->dev);
+ struct pci_controller *hose = dev_get_uclass_priv(ctlr);
+ int i, ret;
+
+ /* As the two host bridges in JH7110 soc have the same default
+ * address translation table, this cause the second root port can't
+ * access it's host bridge config space correctly.
+ * To workaround, config the ATR of host bridge config space by SW.
+ */
+
+ ret = starfive_pcie_set_atr_entry(priv,
+ (phys_addr_t)priv->cfg_base,
+ 0,
+ 1 << XR3_PCI_ECAM_SIZE,
+ XR3PCI_ATR_TRSLID_PCIE_CONFIG);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < hose->region_count; i++) {
+ if (hose->regions[i].flags == PCI_REGION_SYS_MEMORY)
+ continue;
+
+ /* Only support identity mappings. */
+ if (hose->regions[i].bus_start !=
+ hose->regions[i].phys_start)
+ return -EINVAL;
+
+ ret = starfive_pcie_set_atr_entry(priv,
+ hose->regions[i].phys_start,
+ hose->regions[i].bus_start,
+ hose->regions[i].size,
+ XR3PCI_ATR_TRSLID_PCIE_MEMORY);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int starfive_pcie_get_syscon(struct udevice *dev)
+{
+ struct starfive_pcie *priv = dev_get_priv(dev);
+ struct udevice *syscon;
+ struct ofnode_phandle_args syscfg_phandle;
+ u32 cells[4];
+ int ret;
+
+ /* get corresponding syscon phandle */
+ ret = dev_read_phandle_with_args(dev, "starfive,stg-syscon", NULL, 0, 0,
+ &syscfg_phandle);
+
+ if (ret < 0) {
+ dev_err(dev, "Can't get syscfg phandle: %d\n", ret);
+ return ret;
+ }
+
+ ret = uclass_get_device_by_ofnode(UCLASS_SYSCON, syscfg_phandle.node,
+ &syscon);
+ if (ret) {
+ dev_err(dev, "Unable to find syscon device (%d)\n", ret);
+ return ret;
+ }
+
+ priv->regmap = syscon_get_regmap(syscon);
+ if (!priv->regmap) {
+ dev_err(dev, "Unable to find regmap\n");
+ return -ENODEV;
+ }
+
+ /* get syscon register offset */
+ ret = dev_read_u32_array(dev, "starfive,stg-syscon",
+ cells, ARRAY_SIZE(cells));
+ if (ret) {
+ dev_err(dev, "Get syscon register err %d\n", ret);
+ return -EINVAL;
+ }
+
+ dev_dbg(dev, "Get syscon values: %x, %x, %x\n",
+ cells[1], cells[2], cells[3]);
+ priv->stg_arfun = cells[1];
+ priv->stg_awfun = cells[2];
+ priv->stg_rp_nep = cells[3];
+
+ return 0;
+}
+
+static int starfive_pcie_parse_dt(struct udevice *dev)
+{
+ struct starfive_pcie *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->reg_base = (void *)dev_read_addr_name(dev, "reg");
+ if (priv->reg_base == (void __iomem *)FDT_ADDR_T_NONE) {
+ dev_err(dev, "Missing required reg address range\n");
+ return -EINVAL;
+ }
+
+ priv->cfg_base = (void *)dev_read_addr_name(dev, "config");
+ if (priv->cfg_base == (void __iomem *)FDT_ADDR_T_NONE) {
+ dev_err(dev, "Missing required config address range");
+ return -EINVAL;
+ }
+
+ ret = starfive_pcie_get_syscon(dev);
+ if (ret) {
+ dev_err(dev, "Can't get syscon: %d\n", ret);
+ return ret;
+ }
+
+ ret = reset_get_bulk(dev, &priv->rsts);
+ if (ret) {
+ dev_err(dev, "Can't get reset: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_get_bulk(dev, &priv->clks);
+ if (ret) {
+ dev_err(dev, "Can't get clock: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int starfive_pcie_init_port(struct udevice *dev)
+{
+ int ret, i;
+ unsigned int value;
+ struct starfive_pcie *priv = dev_get_priv(dev);
+
+ ret = clk_enable_bulk(&priv->clks);
+ if (ret) {
+ dev_err(dev, "Failed to enable clks (ret=%d)\n", ret);
+ return ret;
+ }
+
+ ret = reset_deassert_bulk(&priv->rsts);
+ if (ret) {
+ dev_err(dev, "Failed to deassert resets (ret=%d)\n", ret);
+ goto err_deassert_clk;
+ }
+
+ ret = pinctrl_select_state(dev, "perst-active");
+ if (ret) {
+ dev_err(dev, "Set perst-active pinctrl failed: %d\n", ret);
+ goto err_deassert_reset;
+ }
+
+ /* Disable physical functions except #0 */
+ for (i = 1; i < PLDA_FUNC_NUM; i++) {
+ regmap_update_bits(priv->regmap,
+ priv->stg_arfun,
+ STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
+ (i << PLDA_PHY_FUNC_SHIFT) <<
+ STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT);
+ regmap_update_bits(priv->regmap,
+ priv->stg_awfun,
+ STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
+ (i << PLDA_PHY_FUNC_SHIFT) <<
+ STG_SYSCON_AXI4_SLVL_AWFUNC_SHIFT);
+
+ value = readl(priv->reg_base + PCI_MISC);
+ value |= PLDA_FUNCTION_DIS;
+ writel(value, priv->reg_base + PCI_MISC);
+ }
+
+ /* Disable physical functions */
+ regmap_update_bits(priv->regmap,
+ priv->stg_arfun,
+ STG_SYSCON_AXI4_SLVL_ARFUNC_MASK,
+ 0 << STG_SYSCON_AXI4_SLVL_ARFUNC_SHIFT);
+ regmap_update_bits(priv->regmap,
+ priv->stg_awfun,
+ STG_SYSCON_AXI4_SLVL_AWFUNC_MASK,
+ 0 << STG_SYSCON_AXI4_SLVL_AWFUNC_SHIFT);
+
+ /* Enable root port */
+ value = readl(priv->reg_base + GEN_SETTINGS);
+ value |= PLDA_RP_ENABLE;
+ writel(value, priv->reg_base + GEN_SETTINGS);
+
+ /* PCIe PCI Standard Configuration Identification Settings. */
+ value = (IDS_PCI_TO_PCI_BRIDGE << IDS_CLASS_CODE_SHIFT) | IDS_REVISION_ID;
+ writel(value, priv->reg_base + PCIE_PCI_IDS);
+
+ /* The LTR message forwarding of PCIe Message Reception was set by core
+ * as default, but the forward id & addr are also need to be reset.
+ * If we do not disable LTR message forwarding here, or set a legal
+ * forwarding address, the kernel will get stuck after this driver probe.
+ * To workaround, disable the LTR message forwarding support on
+ * PCIe Message Reception.
+ */
+ value = readl(priv->reg_base + PMSG_SUPPORT_RX);
+ value &= ~PMSG_LTR_SUPPORT;
+ writel(value, priv->reg_base + PMSG_SUPPORT_RX);
+
+ /* Prefetchable memory window 64-bit addressing support */
+ value = readl(priv->reg_base + PCIE_WINROM);
+ value |= PREF_MEM_WIN_64_SUPPORT;
+ writel(value, priv->reg_base + PCIE_WINROM);
+
+ starfive_pcie_atr_init(priv);
+
+ /* Ensure that PERST has been asserted for at least 300 ms */
+ mdelay(300);
+ ret = pinctrl_select_state(dev, "perst-default");
+ if (ret) {
+ dev_err(dev, "Set perst-default pinctrl failed: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+
+err_deassert_clk:
+ clk_disable_bulk(&priv->clks);
+err_deassert_reset:
+ reset_assert_bulk(&priv->rsts);
+ return ret;
+}
+
+static int starfive_pcie_probe(struct udevice *dev)
+{
+ struct starfive_pcie *priv = dev_get_priv(dev);
+ int ret;
+
+ priv->atr_table_num = 0;
+ priv->dev = dev;
+ priv->first_busno = dev_seq(dev);
+
+ ret = starfive_pcie_parse_dt(dev);
+ if (ret)
+ return ret;
+
+ regmap_update_bits(priv->regmap,
+ priv->stg_rp_nep,
+ STG_SYSCON_K_RP_NEP_MASK,
+ 1 << STG_SYSCON_K_RP_NEP_SHIFT);
+
+ regmap_update_bits(priv->regmap,
+ priv->stg_awfun,
+ STG_SYSCON_CKREF_SRC_MASK,
+ 2 << STG_SYSCON_CKREF_SRC_SHIFT);
+
+ regmap_update_bits(priv->regmap,
+ priv->stg_awfun,
+ STG_SYSCON_CLKREQ_MASK,
+ 1 << STG_SYSCON_CLKREQ_SHIFT);
+
+ ret = starfive_pcie_init_port(dev);
+ if (ret)
+ return ret;
+
+ dev_err(dev, "Starfive PCIe bus probed.\n");
+
+ return 0;
+}
+
+static const struct dm_pci_ops starfive_pcie_ops = {
+ .read_config = starfive_pcie_config_read,
+ .write_config = starfive_pcie_config_write,
+};
+
+static const struct udevice_id starfive_pcie_ids[] = {
+ { .compatible = "starfive,jh7110-pcie" },
+ { }
+};
+
+U_BOOT_DRIVER(starfive_pcie_drv) = {
+ .name = "starfive_7110_pcie",
+ .id = UCLASS_PCI,
+ .of_match = starfive_pcie_ids,
+ .ops = &starfive_pcie_ops,
+ .probe = starfive_pcie_probe,
+ .priv_auto = sizeof(struct starfive_pcie),
+};
--
2.17.1
More information about the U-Boot
mailing list