[PATCH V2 8/9] arm64: dts: rockchip: add gpio-ranges property to gpio nodes

[Vasily Khoruzhick]

On Mon, Feb 13, 2023 at 2:30 PM Chris Morgan <macroalpha82 at gmail.com> wrote:
>
> From: Chris Morgan <macromorgan at hotmail.com>
>
> Add gpio-ranges property to GPIO nodes so that the bank ID can
> be correctly derived for each GPIO bank.

Should not it be merged into linux first? Otherwise it will be
overwritten during the next dts sync with linux.

> Signed-off-by: Chris Morgan <macromorgan at hotmail.com>
> ---
>  arch/arm/dts/rk356x.dtsi | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/dts/rk356x.dtsi b/arch/arm/dts/rk356x.dtsi
> index 5706c3e24f..6492ace0de 100644
> --- a/arch/arm/dts/rk356x.dtsi
> +++ b/arch/arm/dts/rk356x.dtsi
> @@ -1806,6 +1806,7 @@
>                         interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&pmucru PCLK_GPIO0>, <&pmucru DBCLK_GPIO0>;
>                         gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 0 32>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> @@ -1817,6 +1818,7 @@
>                         interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cru PCLK_GPIO1>, <&cru DBCLK_GPIO1>;
>                         gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 32 32>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> @@ -1828,6 +1830,7 @@
>                         interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cru PCLK_GPIO2>, <&cru DBCLK_GPIO2>;
>                         gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 64 32>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> @@ -1839,6 +1842,7 @@
>                         interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cru PCLK_GPIO3>, <&cru DBCLK_GPIO3>;
>                         gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 96 32>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> @@ -1850,6 +1854,7 @@
>                         interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
>                         clocks = <&cru PCLK_GPIO4>, <&cru DBCLK_GPIO4>;
>                         gpio-controller;
> +                       gpio-ranges = <&pinctrl 0 128 32>;
>                         #gpio-cells = <2>;
>                         interrupt-controller;
>                         #interrupt-cells = <2>;
> --
> 2.34.1
>