[PATCH 2/4] mtd: nand: arasan: Set ofnode value

[Ashok Reddy Soma]

Ofnode value is not set, so all the DT properties are not being read
and due to this default values are being used.

Find nand node and set chip->flash_node value.

Signed-off-by: Ashok Reddy Soma <ashok.reddy.soma at amd.com>
---

 drivers/mtd/nand/raw/arasan_nfc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/mtd/nand/raw/arasan_nfc.c b/drivers/mtd/nand/raw/arasan_nfc.c
index ddb4cb1cba..99e2681c14 100644
--- a/drivers/mtd/nand/raw/arasan_nfc.c
+++ b/drivers/mtd/nand/raw/arasan_nfc.c
@@ -1230,12 +1230,16 @@ static int arasan_probe(struct udevice *dev)
 	struct nand_drv *info = &arasan->nand_ctrl;
 	struct nand_config *nand = &info->config;
 	struct mtd_info *mtd;
+	ofnode child;
 	int err = -1;
 
 	info->reg = (struct nand_regs *)dev_read_addr(dev);
 	mtd = nand_to_mtd(nand_chip);
 	nand_set_controller_data(nand_chip, &arasan->nand_ctrl);
 
+	ofnode_for_each_subnode(child, dev_ofnode(dev))
+		nand_set_flash_node(nand_chip, child);
+
 #ifdef CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 	nand_chip->options |= NAND_NO_SUBPAGE_WRITE;
 #endif
-- 
2.17.1