[PATCH 2/2] drivers: thermal: Introduce sun8i_thermal
Andre Przywara
andre.przywara at arm.com
Fri Feb 24 12:06:00 CET 2023
On Mon, 13 Feb 2023 10:42:56 +0800
qianfanguijin at 163.com wrote:
Hi,
sorry for the delay, somehow this mail never made it into my inbox.
> From: qianfan Zhao <qianfanguijin at 163.com>
>
> Portting sun8i_thermal.c from linux-5.15 drivers and drop interrupt
> features. Next is an example from allwinner T3:
So what is the use case for this driver? I see how temperature reporting is
useful in the kernel, and even essential for things like DVFS, but what's
the reason for having that in U-Boot?
> => temperature get thermal-sensor at 1c24c00
> thermal-sensor at 1c24c00: 39437 C
The documentation says that the unit is "degree Celsius". The kernel seems
to use "millidegree of Celsius", at least internally and in sysfs, so this
would need to be adjusted.
Cheers,
Andre
> =>
> thermal-sensor at 1c24c00: 39776 C
> =>
> thermal-sensor at 1c24c00: 39437 C
>
> Signed-off-by: qianfan Zhao <qianfanguijin at 163.com>
> ---
> drivers/thermal/Kconfig | 8 +
> drivers/thermal/Makefile | 1 +
> drivers/thermal/sun8i_thermal.c | 368 ++++++++++++++++++++++++++++++++
> 3 files changed, 377 insertions(+)
> create mode 100644 drivers/thermal/sun8i_thermal.c
>
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 97d4163e8e..be3118175f 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -41,4 +41,12 @@ config TI_DRA7_THERMAL
> Enable thermal support for for the Texas Instruments DRA752 SoC family.
> The driver supports reading CPU temperature.
>
> +config SUN8I_THERMAL
> + bool "Temperature sensor driver for allwinner sunxi SOCs"
> + depends on ARCH_SUNXI
> + select REGMAP
> + help
> + Enable thermal support for for the sunxi SoC family.
> + The driver supports reading CPU temperature.
> +
> endif # if DM_THERMAL
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 8acc7d20cb..9f419962cc 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -9,3 +9,4 @@ obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
> obj-$(CONFIG_IMX_SCU_THERMAL) += imx_scu_thermal.o
> obj-$(CONFIG_TI_DRA7_THERMAL) += ti-bandgap.o
> obj-$(CONFIG_IMX_TMU) += imx_tmu.o
> +obj-$(CONFIG_SUN8I_THERMAL) += sun8i_thermal.o
> diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> new file mode 100644
> index 0000000000..51ea81ccf7
> --- /dev/null
> +++ b/drivers/thermal/sun8i_thermal.c
> @@ -0,0 +1,368 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Thermal sensor driver for Allwinner SOC
> + * Based on the linux driver
> + *
> + * Copyright (C) 2023 qianfan Zhao
> + */
> +#include <config.h>
> +#include <common.h>
> +#include <asm/global_data.h>
> +#include <asm/io.h>
> +#include <asm/arch/clock.h>
> +#include <asm/arch/sys_proto.h>
> +#include <dm.h>
> +#include <dm/device-internal.h>
> +#include <dm/device.h>
> +#include <errno.h>
> +#include <regmap.h>
> +#include <reset.h>
> +#include <clk.h>
> +#include <linux/delay.h>
> +#include <dm/device_compat.h>
> +#include <malloc.h>
> +#include <thermal.h>
> +
> +#define FT_TEMP_MASK GENMASK(11, 0)
> +#define TEMP_CALIB_MASK GENMASK(11, 0)
> +#define CALIBRATE_DEFAULT 0x800
> +
> +#define SUN8I_THS_CTRL0 0x00
> +#define SUN8I_THS_CTRL2 0x40
> +#define SUN8I_THS_IC 0x44
> +#define SUN8I_THS_IS 0x48
> +#define SUN8I_THS_MFC 0x70
> +#define SUN8I_THS_TEMP_CALIB 0x74
> +#define SUN8I_THS_TEMP_DATA 0x80
> +
> +#define SUN50I_THS_CTRL0 0x00
> +#define SUN50I_H6_THS_ENABLE 0x04
> +#define SUN50I_H6_THS_PC 0x08
> +#define SUN50I_H6_THS_DIC 0x10
> +#define SUN50I_H6_THS_DIS 0x20
> +#define SUN50I_H6_THS_MFC 0x30
> +#define SUN50I_H6_THS_TEMP_CALIB 0xa0
> +#define SUN50I_H6_THS_TEMP_DATA 0xc0
> +
> +#define SUN8I_THS_CTRL0_T_ACQ0(x) (GENMASK(15, 0) & (x))
> +#define SUN8I_THS_CTRL2_T_ACQ1(x) ((GENMASK(15, 0) & (x)) << 16)
> +#define SUN8I_THS_DATA_IRQ_STS(x) BIT(x + 8)
> +
> +#define SUN50I_THS_CTRL0_T_ACQ(x) ((GENMASK(15, 0) & (x)) << 16)
> +#define SUN50I_THS_FILTER_EN BIT(2)
> +#define SUN50I_THS_FILTER_TYPE(x) (GENMASK(1, 0) & (x))
> +#define SUN50I_H6_THS_PC_TEMP_PERIOD(x) ((GENMASK(19, 0) & (x)) << 12)
> +#define SUN50I_H6_THS_DATA_IRQ_STS(x) BIT(x)
> +
> +struct ths_device;
> +
> +struct ths_thermal_chip {
> + bool has_mod_clk;
> + bool has_bus_clk_reset;
> + int sensor_num;
> + int offset;
> + int scale;
> + int ft_deviation;
> + int temp_data_base;
> + int (*init)(struct ths_device *tmdev);
> + int (*calc_temp)(struct ths_device *tmdev,
> + int id, int reg);
> +};
> +
> +struct ths_device {
> + const struct ths_thermal_chip *chip;
> + struct udevice *dev;
> + struct regmap *regmap;
> + struct reset_ctl *reset;
> + struct clk *bus_clk;
> + struct clk *mod_clk;
> +};
> +
> +/* Temp Unit: millidegree Celsius */
> +static int sun8i_ths_calc_temp(struct ths_device *tmdev,
> + int id, int reg)
> +{
> + return tmdev->chip->offset - (reg * tmdev->chip->scale / 10);
> +}
> +
> +static int sun50i_h5_calc_temp(struct ths_device *tmdev,
> + int id, int reg)
> +{
> + if (reg >= 0x500)
> + return -1191 * reg / 10 + 223000;
> + else if (!id)
> + return -1452 * reg / 10 + 259000;
> + else
> + return -1590 * reg / 10 + 276000;
> +}
> +
> +static int sun8i_ths_get_temp(struct udevice *dev, int *temp)
> +{
> + struct ths_device *tmdev = dev_get_plat(dev);
> + int val = 0;
> +
> + regmap_read(tmdev->regmap, tmdev->chip->temp_data_base, &val);
> +
> + /* ths have no data yet */
> + if (!val)
> + return -EAGAIN;
> +
> + *temp = tmdev->chip->calc_temp(tmdev, 0, val);
> + /*
> + * According to the original sdk, there are some platforms(rarely)
> + * that add a fixed offset value after calculating the temperature
> + * value. We can't simply put it on the formula for calculating the
> + * temperature above, because the formula for calculating the
> + * temperature above is also used when the sensor is calibrated. If
> + * do this, the correct calibration formula is hard to know.
> + */
> + *temp += tmdev->chip->ft_deviation;
> +
> + return 0;
> +}
> +
> +static int sun8i_ths_resource_init(struct ths_device *tmdev)
> +{
> + struct udevice *dev = tmdev->dev;
> + int ret;
> +
> + tmdev->regmap = devm_regmap_init(dev, NULL, NULL, NULL);
> + if (IS_ERR(tmdev->regmap))
> + return PTR_ERR(tmdev->regmap);
> +
> + if (tmdev->chip->has_bus_clk_reset) {
> + tmdev->reset = devm_reset_control_get_by_index(dev, 0);
> + if (IS_ERR(tmdev->reset))
> + return PTR_ERR(tmdev->reset);
> +
> + tmdev->bus_clk = devm_clk_get(dev, "bus");
> + if (IS_ERR(tmdev->bus_clk))
> + return PTR_ERR(tmdev->bus_clk);
> + }
> +
> + if (tmdev->chip->has_mod_clk) {
> + tmdev->mod_clk = devm_clk_get(dev, "mod");
> + if (IS_ERR(tmdev->mod_clk))
> + return PTR_ERR(tmdev->mod_clk);
> + }
> +
> + ret = reset_deassert(tmdev->reset);
> + if (ret)
> + return ret;
> +
> + ret = clk_prepare_enable(tmdev->bus_clk);
> + if (ret)
> + goto assert_reset;
> +
> + ret = clk_prepare_enable(tmdev->mod_clk);
> + if (ret)
> + goto bus_disable;
> +
> + return 0;
> +
> +bus_disable:
> + clk_disable_unprepare(tmdev->bus_clk);
> +assert_reset:
> + reset_assert(tmdev->reset);
> +
> + return ret;
> +}
> +
> +static int sun8i_h3_thermal_init(struct ths_device *tmdev)
> +{
> + int val;
> +
> + /* average over 4 samples */
> + regmap_write(tmdev->regmap, SUN8I_THS_MFC,
> + SUN50I_THS_FILTER_EN |
> + SUN50I_THS_FILTER_TYPE(1));
> + /*
> + * clkin = 24MHz
> + * filter_samples = 4
> + * period = 0.25s
> + *
> + * x = period * clkin / 4096 / filter_samples - 1
> + * = 365
> + */
> + val = GENMASK(7 + tmdev->chip->sensor_num, 8);
> + regmap_write(tmdev->regmap, SUN8I_THS_IC,
> + SUN50I_H6_THS_PC_TEMP_PERIOD(365) | val);
> + /*
> + * T_acq = 20us
> + * clkin = 24MHz
> + *
> + * x = T_acq * clkin - 1
> + * = 479
> + */
> + regmap_write(tmdev->regmap, SUN8I_THS_CTRL0,
> + SUN8I_THS_CTRL0_T_ACQ0(479));
> + val = GENMASK(tmdev->chip->sensor_num - 1, 0);
> + regmap_write(tmdev->regmap, SUN8I_THS_CTRL2,
> + SUN8I_THS_CTRL2_T_ACQ1(479) | val);
> +
> + return 0;
> +}
> +
> +/*
> + * Without this undocumented value, the returned temperatures would
> + * be higher than real ones by about 20C.
> + */
> +#define SUN50I_H6_CTRL0_UNK 0x0000002f
> +
> +static int sun50i_h6_thermal_init(struct ths_device *tmdev)
> +{
> + int val;
> +
> + /*
> + * T_acq = 20us
> + * clkin = 24MHz
> + *
> + * x = T_acq * clkin - 1
> + * = 479
> + */
> + regmap_write(tmdev->regmap, SUN50I_THS_CTRL0,
> + SUN50I_H6_CTRL0_UNK | SUN50I_THS_CTRL0_T_ACQ(479));
> + /* average over 4 samples */
> + regmap_write(tmdev->regmap, SUN50I_H6_THS_MFC,
> + SUN50I_THS_FILTER_EN |
> + SUN50I_THS_FILTER_TYPE(1));
> + /*
> + * clkin = 24MHz
> + * filter_samples = 4
> + * period = 0.25s
> + *
> + * x = period * clkin / 4096 / filter_samples - 1
> + * = 365
> + */
> + regmap_write(tmdev->regmap, SUN50I_H6_THS_PC,
> + SUN50I_H6_THS_PC_TEMP_PERIOD(365));
> + /* enable sensor */
> + val = GENMASK(tmdev->chip->sensor_num - 1, 0);
> + regmap_write(tmdev->regmap, SUN50I_H6_THS_ENABLE, val);
> + /* thermal data interrupt enable */
> + val = GENMASK(tmdev->chip->sensor_num - 1, 0);
> + regmap_write(tmdev->regmap, SUN50I_H6_THS_DIC, val);
> +
> + return 0;
> +}
> +
> +static int sun8i_ths_probe(struct udevice *udev)
> +{
> + struct ths_device *tmdev = dev_get_plat(udev);
> + int ret;
> +
> + tmdev->dev = udev;
> +
> + tmdev->chip =
> + (const struct ths_thermal_chip *)dev_get_driver_data(udev);
> + if (!tmdev->chip)
> + return -EINVAL;
> +
> + ret = sun8i_ths_resource_init(tmdev);
> + if (ret)
> + return ret;
> +
> + ret = tmdev->chip->init(tmdev);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct dm_thermal_ops sun8i_ths_ops = {
> + .get_temp = sun8i_ths_get_temp,
> +};
> +
> +static const struct ths_thermal_chip sun8i_a83t_ths = {
> + .sensor_num = 3,
> + .scale = 705,
> + .offset = 191668,
> + .temp_data_base = SUN8I_THS_TEMP_DATA,
> + .init = sun8i_h3_thermal_init,
> + .calc_temp = sun8i_ths_calc_temp,
> +};
> +
> +static const struct ths_thermal_chip sun8i_h3_ths = {
> + .sensor_num = 1,
> + .scale = 1211,
> + .offset = 217000,
> + .has_mod_clk = true,
> + .has_bus_clk_reset = true,
> + .temp_data_base = SUN8I_THS_TEMP_DATA,
> + .init = sun8i_h3_thermal_init,
> + .calc_temp = sun8i_ths_calc_temp,
> +};
> +
> +static const struct ths_thermal_chip sun8i_r40_ths = {
> + .sensor_num = 2,
> + .offset = 251086,
> + .scale = 1130,
> + .has_mod_clk = true,
> + .has_bus_clk_reset = true,
> + .temp_data_base = SUN8I_THS_TEMP_DATA,
> + .init = sun8i_h3_thermal_init,
> + .calc_temp = sun8i_ths_calc_temp,
> +};
> +
> +static const struct ths_thermal_chip sun50i_a64_ths = {
> + .sensor_num = 3,
> + .offset = 260890,
> + .scale = 1170,
> + .has_mod_clk = true,
> + .has_bus_clk_reset = true,
> + .temp_data_base = SUN8I_THS_TEMP_DATA,
> + .init = sun8i_h3_thermal_init,
> + .calc_temp = sun8i_ths_calc_temp,
> +};
> +
> +static const struct ths_thermal_chip sun50i_a100_ths = {
> + .sensor_num = 3,
> + .has_bus_clk_reset = true,
> + .ft_deviation = 8000,
> + .offset = 187744,
> + .scale = 672,
> + .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
> + .init = sun50i_h6_thermal_init,
> + .calc_temp = sun8i_ths_calc_temp,
> +};
> +
> +static const struct ths_thermal_chip sun50i_h5_ths = {
> + .sensor_num = 2,
> + .has_mod_clk = true,
> + .has_bus_clk_reset = true,
> + .temp_data_base = SUN8I_THS_TEMP_DATA,
> + .init = sun8i_h3_thermal_init,
> + .calc_temp = sun50i_h5_calc_temp,
> +};
> +
> +static const struct ths_thermal_chip sun50i_h6_ths = {
> + .sensor_num = 2,
> + .has_bus_clk_reset = true,
> + .ft_deviation = 7000,
> + .offset = 187744,
> + .scale = 672,
> + .temp_data_base = SUN50I_H6_THS_TEMP_DATA,
> + .init = sun50i_h6_thermal_init,
> + .calc_temp = sun8i_ths_calc_temp,
> +};
> +
> +static const struct udevice_id of_ths_match[] = {
> + { .compatible = "allwinner,sun8i-a83t-ths", .data = (ulong)&sun8i_a83t_ths },
> + { .compatible = "allwinner,sun8i-h3-ths", .data = (ulong)&sun8i_h3_ths },
> + { .compatible = "allwinner,sun8i-r40-ths", .data = (ulong)&sun8i_r40_ths },
> + { .compatible = "allwinner,sun50i-a64-ths", .data = (ulong)&sun50i_a64_ths },
> + { .compatible = "allwinner,sun50i-a100-ths", .data = (ulong)&sun50i_a100_ths },
> + { .compatible = "allwinner,sun50i-h5-ths", .data = (ulong)&sun50i_h5_ths },
> + { .compatible = "allwinner,sun50i-h6-ths", .data = (ulong)&sun50i_h6_ths },
> + { /* sentinel */ },
> +};
> +
> +U_BOOT_DRIVER(sun8i_thermal) = {
> + .name = "sun8i_thermal",
> + .id = UCLASS_THERMAL,
> + .ops = &sun8i_ths_ops,
> + .of_match = of_ths_match,
> + .probe = sun8i_ths_probe,
> + .plat_auto = sizeof(struct ths_device),
> + .flags = DM_FLAG_PRE_RELOC,
> +};
More information about the U-Boot
mailing list