[PATCH 2/2] arm: mvebu: clearfog: Add defconfig for SPI booting

[Martin Rowe]

On Sat, 25 Feb 2023 at 07:41, Pali Rohár <pali at kernel.org> wrote:
>
> On Saturday 25 February 2023 11:42:20 Martin Rowe wrote:
> > This new clearfog_spi_defconfig file is copy of existing
> > clearfog_defconfig file and changed to instruct build system to
> > generate final kwbimage for SPI booting and to store the
> > environment in SPI as well.
> >
> > Signed-off-by: Martin Rowe <martin.p.rowe at gmail.com>
> > ---
> >  .../{clearfog_sata_defconfig => clearfog_spi_defconfig}    | 7 ++++++-
> >  1 file changed, 6 insertions(+), 1 deletion(-)
> >  copy configs/{clearfog_sata_defconfig => clearfog_spi_defconfig} (93%)
> >
> > diff --git a/configs/clearfog_sata_defconfig b/configs/clearfog_spi_defconfig
> > similarity index 93%
> > copy from configs/clearfog_sata_defconfig
> > copy to configs/clearfog_spi_defconfig
> > index 84f900bf50..31b1e9fce8 100644
> > --- a/configs/clearfog_sata_defconfig
> > +++ b/configs/clearfog_spi_defconfig
> > @@ -3,20 +3,24 @@ CONFIG_ARCH_CPU_INIT=y
> >  CONFIG_SYS_THUMB_BUILD=y
> >  CONFIG_ARCH_MVEBU=y
> >  CONFIG_TEXT_BASE=0x00800000
> > +CONFIG_SPL_GPIO=y
> >  CONFIG_SPL_LIBCOMMON_SUPPORT=y
> >  CONFIG_SPL_LIBGENERIC_SUPPORT=y
> >  CONFIG_NR_DRAM_BANKS=2
> >  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
> >  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xff0000
> >  CONFIG_TARGET_CLEARFOG=y
> > -CONFIG_MVEBU_SPL_BOOT_DEVICE_SATA=y
> > +CONFIG_ENV_SECT_SIZE=0x10000
> >  CONFIG_DEFAULT_DEVICE_TREE="armada-388-clearfog"
> >  CONFIG_SPL_TEXT_BASE=0x40000030
> > +CONFIG_SPL_MMC=y
> >  CONFIG_SPL_SERIAL=y
> >  CONFIG_SPL_STACK=0x4002c000
> >  CONFIG_SPL=y
> >  CONFIG_DEBUG_UART_BASE=0xf1012000
> >  CONFIG_DEBUG_UART_CLOCK=250000000
> > +CONFIG_SPL_LIBDISK_SUPPORT=y
> > +# CONFIG_SPL_SPI is not set
>
> Any reason to disable it?

It's the same as MMC and SATA defconfigs this way, it just needs to be
explicit here because of something SPI related that we've enabled.
SPL_DM_SPI is enabled in all of the configs, so I'm guessing that it
is providing driver support because everything seems to work without
SPL_SPI.

I re-tested with and without the config and it doesn't seem to change
anything. With it enabled the file is 588K instead of 580K without it,
but that's not really an issue with 4M of flash storage available.

> >  CONFIG_SYS_LOAD_ADDR=0x800000
> >  CONFIG_DEBUG_UART=y
> >  CONFIG_AHCI=y
> > @@ -59,6 +63,7 @@ CONFIG_SYS_I2C_MVTWSI=y
> >  CONFIG_I2C_EEPROM=y
> >  CONFIG_SPL_I2C_EEPROM=y
> >  CONFIG_MMC_BROKEN_CD=y
> > +CONFIG_SPL_DM_MMC=y
> >  CONFIG_SUPPORT_EMMC_BOOT=y
> >  CONFIG_MMC_SDHCI=y
> >  CONFIG_MMC_SDHCI_SDMA=y
> > --
> > 2.39.2
> >