[PATCH] mtd: nand: Show reserved block in chip.erase

[Dario Binacchi]

From: Michael Trimarchi <michael at amarulasolutions.com>

The "nand chip.erase" command always printed as bad blocks even in the
case of reserved blocks. Reserved blocks are used for storing bad block
tables. The patch displays "bbt reserved" when printing reserved blocks in
"nand chip.erase" command.

Signed-off-by: Michael Trimarchi <michael at amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
---

 drivers/mtd/nand/raw/nand_util.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/nand_util.c b/drivers/mtd/nand/raw/nand_util.c
index b2345dca7f71..72cc24f40376 100644
--- a/drivers/mtd/nand/raw/nand_util.c
+++ b/drivers/mtd/nand/raw/nand_util.c
@@ -113,9 +113,10 @@ int nand_erase_opts(struct mtd_info *mtd,
 			int ret = mtd_block_isbad(mtd, erase.addr);
 			if (ret > 0) {
 				if (!opts->quiet)
-					printf("\rSkipping bad block at  "
+					printf("\rSkipping %s at  "
 					       "0x%08llx                 "
 					       "                         \n",
+					       ret == 1 ? "bad block" : "bbt reserved",
 					       erase.addr);
 
 				if (!opts->spread)
-- 
2.32.0