[PATCH 3/6] video: otm8009a: Fix use of CONFIG_IS_ENABLED on DM_REGULATOR

Marek Vasut marek.vasut+renesas at mailbox.org
Tue Feb 28 02:55:20 CET 2023


The DM_REGULATOR symbol has SPL counterpart in:
  drivers/power/regulator/Kconfig:config SPL_DM_REGULATOR
Use CONFIG_IS_ENABLED() macro to match on the correct
variant depending on the build stage.

Signed-off-by: Marek Vasut <marek.vasut+renesas at mailbox.org>
---
Cc: Anatolij Gustschin <agust at denx.de>
Cc: Jaehoon Chung <jh80.chung at samsung.com>
Cc: Marek Vasut <marek.vasut+renesas at mailbox.org>
Cc: Peng Fan <peng.fan at nxp.com>
Cc: Stefan Herbrechtsmeier <stefan.herbrechtsmeier at weidmueller.com>
---
 drivers/video/orisetech_otm8009a.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/video/orisetech_otm8009a.c b/drivers/video/orisetech_otm8009a.c
index 95738e34bf6..848f174b6e4 100644
--- a/drivers/video/orisetech_otm8009a.c
+++ b/drivers/video/orisetech_otm8009a.c
@@ -300,7 +300,7 @@ static int otm8009a_panel_of_to_plat(struct udevice *dev)
 	struct otm8009a_panel_priv *priv = dev_get_priv(dev);
 	int ret;
 
-	if (IS_ENABLED(CONFIG_DM_REGULATOR)) {
+	if (CONFIG_IS_ENABLED(DM_REGULATOR)) {
 		ret =  device_get_supply_regulator(dev, "power-supply",
 						   &priv->reg);
 		if (ret && ret != -ENOENT) {
@@ -326,7 +326,7 @@ static int otm8009a_panel_probe(struct udevice *dev)
 	struct mipi_dsi_panel_plat *plat = dev_get_plat(dev);
 	int ret;
 
-	if (IS_ENABLED(CONFIG_DM_REGULATOR) && priv->reg) {
+	if (CONFIG_IS_ENABLED(DM_REGULATOR) && priv->reg) {
 		dev_dbg(dev, "enable regulator '%s'\n", priv->reg->name);
 		ret = regulator_set_enable(priv->reg, true);
 		if (ret)
-- 
2.39.2



More information about the U-Boot mailing list