[PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes
Pali Rohár
pali at kernel.org
Tue Feb 28 10:54:29 CET 2023
On Tuesday 28 February 2023 08:03:47 Stefan Roese wrote:
> Hi Martin,
> Hi Pali,
>
> On 2/27/23 12:29, Martin Rowe wrote:
> > On Mon, 27 Feb 2023 at 08:04, Pali Rohár <pali at kernel.org
> > <mailto:pali at kernel.org>> wrote:
> >
> > On Monday 27 February 2023 08:44:30 Stefan Roese wrote:
> > > Hi Pali,
> > >
> > > On 2/25/23 23:00, Pali Rohár wrote:
> > > > On Tuesday 21 February 2023 21:18:26 Pali Rohár wrote:
> > > > > This patch series contains various improvements and fixes for
> > existing
> > > > > logical errors. Boot phase was adjusted to match behavior of
> > Armada 385
> > > > > BootROM by inspecting and disassembling of BootROM binary
> > dump itself.
> > > > > Important information are included in documentation patch for
> > kwboot.
> > > > > Most of the changes are untested, hence this patch series is
> > just RFC.
> > > > > So please test changes before applying, idealy on SPI, SATA
> > and SD/MMC.
> > > > > Nevertheless all patches on github passed CI testing in this PR:
> > > > > https://github.com/u-boot/u-boot/pull/275
> > <https://github.com/u-boot/u-boot/pull/275>
> > > >
> > > > Patches were tested on more boards and seems there is no
> > reported issue,
> > > > but other improvements.
> > > >
> > > > So do you need something to modify in this relatively big patch
> > series?
> > > > If it is not really needed I would like to not send it again
> > because
> > > > denx servers are not able to handle it. And it take me lot of
> > time to
> > > > send patches over emails to denx servers.
> > >
> > > I'm fine with applying the series as-is. I'm a bit hesitant
> > though, if
> > > it should be applied to master or to next. As Tom clearly
> > noticed, that
> > > only fixes should be added after rc2 this time.
> > >
> > > What is your thinking on this?
> >
> > Well, I do not know. AFAIK more patches here are fixing broken mvebu
> > boards (e.g. eMMC or SATA parts). Maybe Martin or Josua could comment?
> >
> >
> > A388 Clearfog was definitely broken prior to this patchset. There is
> > quite a bit of churn that this has caused for some OpenWRT users [1] as
> > well as for me. It would be nice to have a stable build for these
> > boards.
> >
> > [1] https://github.com/openwrt/openwrt/issues/11661
> > <https://github.com/openwrt/openwrt/issues/11661>
>
> Okay. Thanks for the explanation. So it makes sense to pull this
> patchset at this stage IMHO.
>
> BUT: While trying to apply the patches sent to me directly this fails at
> this patch:
>
> tools: kwbimage: Add support for XIP SPI/NOR images
>
> I tried to fix this merge problem manually, but this looks a bit bogus.
> That's why I followed your instruction to pull the patches directly from
> github:
>
> git fetch https://github.com/u-boot/u-boot.git refs/pull/275/merge:mvebu
>
> This works and all patches apply clean. But looking into the patches I
> noticed, that these patches from github do not include all patches
> sent to the list. refs/pull/275/merge:mvebu stops after
>
> tools: mkimage: Do not fill legacy_img_hdr for non-legacy XIP images
>
> This is the patch directly before the failing patch mentioned above.
>
> Pali, could you please explain what went wrong here? Maybe I'm missing
> something?
Yes, denx mail server is broken and randomly crashes when receiving /
processing email. It just bounce back with server stacktrace or what.
I tried to resend patches to ML which did not appeared on patchwork.
But I cannot do more. So you can try to download patches from patchwork
or from github.
> Thanks,
> Stefan
>
> >
> > > Thanks,
> > > Stefan
> > >
> > > >
> > > > >
> > > > > Pali Rohár (59):
> > > > > tools: kwbimage: Fix generating, verifying and extracting SDIO
> > > > > kwbimage
> > > > > tools: kwboot: Fix parsing SDIO kwbimage
> > > > > arm: mvebu: spl: Fix parsing SDIO kwbimage
> > > > > cmd: mvebu/bubt: Fix parsing SDIO kwbimage
> > > > > tools: kwbimage: Fix generating, verifying and extracting SATA
> > > > > kwbimage
> > > > > tools: kwboot: Fix parsing SATA kwbimage
> > > > > arm: mvebu: spl: Fix parsing SATA kwbimage
> > > > > cmd: mvebu/bubt: Fix parsing SATA kwbimage
> > > > > arm: mvebu: spl: Remove checks for BOOT_DEVICE_MMC2 and
> > > > > BOOT_DEVICE_MMC2_2
> > > > > arm: mvebu: spl: Load proper U-Boot from selected eMMC
> > boot partition
> > > > > spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION
> > > > > arm: mvebu: spl: Fix support for loading U-Boot proper
> > from SD card
> > > > > tools: kwboot: Add more documentation references
> > > > > tools: kwboot: Add image type documentation
> > > > > tools: kwboot: Fix parsing UART image without data checksum
> > > > > tools: kwboot: Validate optional kwbimage v1 headers
> > > > > tools: kwboot: Add check that kwbimage contains DDR init code
> > > > > tools: kwboot: Fix patching of SPI/NOR XIP images
> > > > > tools: kwboot: Show image type and error parsing reasons
> > > > > cmd: mvebu/bubt: Add support for selecting eMMC HW partition
> > > > > cmd: mvebu/bubt: Add support for writing image to SATA disk
> > > > > cmd: mvebu/bubt: Add support for reading image from the
> > SATA disk
> > > > > partition
> > > > > cmd: mvebu/bubt: Rename variable image_size to hdr_size
> > > > > cmd: mvebu/bubt: Mark all local symbols as static
> > > > > cmd: mvebu/bubt: Do not modify image in A8K
> > check_image_header()
> > > > > cmd: mvebu/bubt: Check also A8K boot image checksum
> > > > > cmd: mvebu/bubt: Set correct default image name for 32-bit
> > Armada SoCs
> > > > > cmd: mvebu/bubt: Better guess default MVEBU_*_BOOT option
> > > > > cmd: mvebu/bubt: Fix warnings: unused variable
> > 'secure_mode' and
> > > > > 'fuse_read_u64' defined but not used
> > > > > cmd: mvebu/bubt: Enable command by default
> > > > > tools: kwbimage: Fix dumping register set / DATA commands
> > > > > tools: kwbimage: Fix endianity when dumping NAND_PAGE_SIZE
> > > > > tools: kwbimage: Fix dumping NAND_BADBLK_LOCATION
> > > > > tools: kwbimage: Fix dumping NAND_BLKSZ
> > > > > tools: kwbimage: Fix generating of kwbimage v0 header checksum
> > > > > tools: kwbimage: Fix endianity when printing kwbimage header
> > > > > tools: kwbimage: Reject mkimage -F option
> > > > > tools: kwbimage: Add support for dumping NAND_BLKSZ for v0
> > images
> > > > > tools: kwbimage: Print binary image offset as size
> > > > > tools: kwbimage: Print image data offset when printing
> > kwbimage header
> > > > > tools: kwbimage: Simplify add_secure_header_v1()
> > > > > tools: kwbimage: Rename imagesz to dataoff
> > > > > tools: kwbimage: Fix generating secure boot data image
> > signature
> > > > > tools: kwbimage: Fix invalid secure boot header signature
> > > > > tools: mkimage: Do not fill legacy_img_hdr for non-legacy
> > XIP images
> > > > > tools: kwbimage: Add support for XIP SPI/NOR images
> > > > > tools: mkimage: Print human readable error when -d is not
> > specified
> > > > > tools: mkimage: Do not try to open datafile when it is skipped
> > > > > tools: kwbimage: Add support for creating an image with no
> > data
> > > > > arm: mvebu: Add support for generating NAND kwbimage
> > > > > arm: mvebu: Add support for generating PEX kwbimage
> > > > > arm: mvebu: Fix description of
> > MVEBU_SPL_BOOT_DEVICE_(SPI|MMC) options
> > > > > arm: mvebu: db-88f6820-amc: Add defconfig for NAND booting
> > > > > arm: mvebu: clearfog: Add defconfig for SATA booting
> > > > > arm: mvebu: Remove A39x relicts
> > > > > arm: mvebu: Fix comment about CPU_ATTR_BOOTROM mapping
> > > > > arm: mvebu: Define env_sf_get_env_addr() also for Proper
> > U-Boot
> > > > > arm: mvebu: Define SPL memory maps
> > > > > doc/kwboot.1: Update example description
> > > > >
> > > > > arch/arm/mach-mvebu/Kconfig | 23 +-
> > > > > arch/arm/mach-mvebu/Makefile | 13 +
> > > > > arch/arm/mach-mvebu/cpu.c | 11 +-
> > > > > arch/arm/mach-mvebu/include/mach/cpu.h | 21 ++
> > > > > arch/arm/mach-mvebu/kwbimage.cfg.in
> > <http://kwbimage.cfg.in> | 5 +
> > > > > .../serdes/a38x/high_speed_env_spec.c | 4 +-
> > > > > .../serdes/a38x/high_speed_env_spec.h | 4 +-
> > > > > arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c | 14 +-
> > > > > arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h | 30 --
> > > > > arch/arm/mach-mvebu/spl.c | 84 +++--
> > > > > cmd/mvebu/Kconfig | 18 ++
> > > > > cmd/mvebu/bubt.c | 253
> > ++++++++++++---
> > > > > common/spl/Kconfig | 9 +
> > > > > common/spl/spl_mmc.c | 12 +-
> > > > > ...rfog_defconfig => clearfog_sata_defconfig} | 2 +-
> > > > > ...efconfig => db-88f6820-amc_nand_defconfig} | 6 +-
> > > > > doc/kwboot.1 | 3 +-
> > > > > doc/mvebu/cmd/bubt.txt | 25 +-
> > > > > drivers/mtd/nand/raw/Kconfig | 4 +-
> > > > > tools/kwbimage.c | 297
> > +++++++++++-------
> > > > > tools/kwboot.c | 200
> > +++++++++++-
> > > > > tools/mkimage.c | 11 +-
> > > > > 22 files changed, 768 insertions(+), 281 deletions(-)
> > > > > copy configs/{clearfog_defconfig =>
> > clearfog_sata_defconfig} (98%)
> > > > > copy configs/{db-88f6820-amc_defconfig =>
> > db-88f6820-amc_nand_defconfig} (92%)
> > > > >
> > > > > --
> > > > > 2.20.1
> > > > >
> > >
> > > Viele Grüße,
> > > Stefan Roese
> > >
> > > --
> > > DENX Software Engineering GmbH, Managing Director: Erika Unter
> > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email:
> > sr at denx.de <mailto:sr at denx.de>
> >
>
> Viele Grüße,
> Stefan Roese
>
> --
> DENX Software Engineering GmbH, Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
More information about the U-Boot
mailing list