[PATCH RFC u-boot-mvebu 00/59] arm: mvebu: Various fixes

Pali Rohár pali at kernel.org
Tue Feb 28 11:10:21 CET 2023


On Tuesday 28 February 2023 11:01:55 Stefan Roese wrote:
> Hi Pali,
> 
> On 2/28/23 10:54, Pali Rohár wrote:
> > On Tuesday 28 February 2023 08:03:47 Stefan Roese wrote:
> > > Hi Martin,
> > > Hi Pali,
> > > 
> > > On 2/27/23 12:29, Martin Rowe wrote:
> > > > On Mon, 27 Feb 2023 at 08:04, Pali Rohár <pali at kernel.org
> > > > <mailto:pali at kernel.org>> wrote:
> > > > 
> > > >      On Monday 27 February 2023 08:44:30 Stefan Roese wrote:
> > > >       > Hi Pali,
> > > >       >
> > > >       > On 2/25/23 23:00, Pali Rohár wrote:
> > > >       > > On Tuesday 21 February 2023 21:18:26 Pali Rohár wrote:
> > > >       > > > This patch series contains various improvements and fixes for
> > > >      existing
> > > >       > > > logical errors. Boot phase was adjusted to match behavior of
> > > >      Armada 385
> > > >       > > > BootROM by inspecting and disassembling of BootROM binary
> > > >      dump itself.
> > > >       > > > Important information are included in documentation patch for
> > > >      kwboot.
> > > >       > > > Most of the changes are untested, hence this patch series is
> > > >      just RFC.
> > > >       > > > So please test changes before applying, idealy on SPI, SATA
> > > >      and SD/MMC.
> > > >       > > > Nevertheless all patches on github passed CI testing in this PR:
> > > >       > > > https://github.com/u-boot/u-boot/pull/275
> > > >      <https://github.com/u-boot/u-boot/pull/275>
> > > >       > >
> > > >       > > Patches were tested on more boards and seems there is no
> > > >      reported issue,
> > > >       > > but other improvements.
> > > >       > >
> > > >       > > So do you need something to modify in this relatively big patch
> > > >      series?
> > > >       > > If it is not really needed I would like to not send it again
> > > >      because
> > > >       > > denx servers are not able to handle it. And it take me lot of
> > > >      time to
> > > >       > > send patches over emails to denx servers.
> > > >       >
> > > >       > I'm fine with applying the series as-is. I'm a bit hesitant
> > > >      though, if
> > > >       > it should be applied to master or to next. As Tom clearly
> > > >      noticed, that
> > > >       > only fixes should be added after rc2 this time.
> > > >       >
> > > >       > What is your thinking on this?
> > > > 
> > > >      Well, I do not know. AFAIK more patches here are fixing broken mvebu
> > > >      boards (e.g. eMMC or SATA parts). Maybe Martin or Josua could comment?
> > > > 
> > > > 
> > > > A388 Clearfog was definitely broken prior to this patchset. There is
> > > > quite a bit of churn that this has caused for some OpenWRT users [1] as
> > > > well as for me. It would be nice to have a stable build for these
> > > > boards.
> > > > 
> > > > [1] https://github.com/openwrt/openwrt/issues/11661
> > > > <https://github.com/openwrt/openwrt/issues/11661>
> > > 
> > > Okay. Thanks for the explanation. So it makes sense to pull this
> > > patchset at this stage IMHO.
> > > 
> > > BUT: While trying to apply the patches sent to me directly this fails at
> > > this patch:
> > > 
> > > tools: kwbimage: Add support for XIP SPI/NOR images
> > > 
> > > I tried to fix this merge problem manually, but this looks a bit bogus.
> > > That's why I followed your instruction to pull the patches directly from
> > > github:
> > > 
> > > git fetch https://github.com/u-boot/u-boot.git refs/pull/275/merge:mvebu
> > > 
> > > This works and all patches apply clean. But looking into the patches I
> > > noticed, that these patches from github do not include all patches
> > > sent to the list. refs/pull/275/merge:mvebu stops after
> > > 
> > > tools: mkimage: Do not fill legacy_img_hdr for non-legacy XIP images
> > > 
> > > This is the patch directly before the failing patch mentioned above.
> > > 
> > > Pali, could you please explain what went wrong here? Maybe I'm missing
> > > something?
> > 
> > Yes, denx mail server is broken and randomly crashes when receiving /
> > processing email. It just bounce back with server stacktrace or what.
> > I tried to resend patches to ML which did not appeared on patchwork.
> > But I cannot do more. So you can try to download patches from patchwork
> > or from github.
> 
> Okay, I understood the issues with the DENX mail server. Sorry about
> this.
> 
> But: Please re-read my lines above. The patches on github are less than
> the patches sent to the list. There are *more* patches sent to the list
> (or to me directly) than in your github branch.

Ou, so there are more patches on the list than on github? Strange
because I sent exactly same patches to ML and on github and some patches
were not correctly delivered to mail, therefore number of mail patches
could be less than on github.

> So my question is, why are less patches in your github branch? Or did
> you try to re-send with this smaller amount of patches and this did not
> work because of the crashing mail server?

I cannot understand how it is possible. There should be 59 patches. I
have not created / sent more patches. If there is missing some patch on
Github I can double check it...

> Thanks,
> Stefan
> 
> > 
> > > Thanks,
> > > Stefan
> > > 
> > > > 
> > > >       > Thanks,
> > > >       > Stefan
> > > >       >
> > > >       > >
> > > >       > > >
> > > >       > > > Pali Rohár (59):
> > > >       > > >    tools: kwbimage: Fix generating, verifying and extracting SDIO
> > > >       > > >      kwbimage
> > > >       > > >    tools: kwboot: Fix parsing SDIO kwbimage
> > > >       > > >    arm: mvebu: spl: Fix parsing SDIO kwbimage
> > > >       > > >    cmd: mvebu/bubt: Fix parsing SDIO kwbimage
> > > >       > > >    tools: kwbimage: Fix generating, verifying and extracting SATA
> > > >       > > >      kwbimage
> > > >       > > >    tools: kwboot: Fix parsing SATA kwbimage
> > > >       > > >    arm: mvebu: spl: Fix parsing SATA kwbimage
> > > >       > > >    cmd: mvebu/bubt: Fix parsing SATA kwbimage
> > > >       > > >    arm: mvebu: spl: Remove checks for BOOT_DEVICE_MMC2 and
> > > >       > > >      BOOT_DEVICE_MMC2_2
> > > >       > > >    arm: mvebu: spl: Load proper U-Boot from selected eMMC
> > > >      boot partition
> > > >       > > >    spl: mmc: Allow to disable SYS_MMCSD_FS_BOOT_PARTITION
> > > >       > > >    arm: mvebu: spl: Fix support for loading U-Boot proper
> > > >      from SD card
> > > >       > > >    tools: kwboot: Add more documentation references
> > > >       > > >    tools: kwboot: Add image type documentation
> > > >       > > >    tools: kwboot: Fix parsing UART image without data checksum
> > > >       > > >    tools: kwboot: Validate optional kwbimage v1 headers
> > > >       > > >    tools: kwboot: Add check that kwbimage contains DDR init code
> > > >       > > >    tools: kwboot: Fix patching of SPI/NOR XIP images
> > > >       > > >    tools: kwboot: Show image type and error parsing reasons
> > > >       > > >    cmd: mvebu/bubt: Add support for selecting eMMC HW partition
> > > >       > > >    cmd: mvebu/bubt: Add support for writing image to SATA disk
> > > >       > > >    cmd: mvebu/bubt: Add support for reading image from the
> > > >      SATA disk
> > > >       > > >      partition
> > > >       > > >    cmd: mvebu/bubt: Rename variable image_size to hdr_size
> > > >       > > >    cmd: mvebu/bubt: Mark all local symbols as static
> > > >       > > >    cmd: mvebu/bubt: Do not modify image in A8K
> > > >      check_image_header()
> > > >       > > >    cmd: mvebu/bubt: Check also A8K boot image checksum
> > > >       > > >    cmd: mvebu/bubt: Set correct default image name for 32-bit
> > > >      Armada SoCs
> > > >       > > >    cmd: mvebu/bubt: Better guess default MVEBU_*_BOOT option
> > > >       > > >    cmd: mvebu/bubt: Fix warnings: unused variable
> > > >      'secure_mode' and
> > > >       > > >      'fuse_read_u64' defined but not used
> > > >       > > >    cmd: mvebu/bubt: Enable command by default
> > > >       > > >    tools: kwbimage: Fix dumping register set / DATA commands
> > > >       > > >    tools: kwbimage: Fix endianity when dumping NAND_PAGE_SIZE
> > > >       > > >    tools: kwbimage: Fix dumping NAND_BADBLK_LOCATION
> > > >       > > >    tools: kwbimage: Fix dumping NAND_BLKSZ
> > > >       > > >    tools: kwbimage: Fix generating of kwbimage v0 header checksum
> > > >       > > >    tools: kwbimage: Fix endianity when printing kwbimage header
> > > >       > > >    tools: kwbimage: Reject mkimage -F option
> > > >       > > >    tools: kwbimage: Add support for dumping NAND_BLKSZ for v0
> > > >      images
> > > >       > > >    tools: kwbimage: Print binary image offset as size
> > > >       > > >    tools: kwbimage: Print image data offset when printing
> > > >      kwbimage header
> > > >       > > >    tools: kwbimage: Simplify add_secure_header_v1()
> > > >       > > >    tools: kwbimage: Rename imagesz to dataoff
> > > >       > > >    tools: kwbimage: Fix generating secure boot data image
> > > >      signature
> > > >       > > >    tools: kwbimage: Fix invalid secure boot header signature
> > > >       > > >    tools: mkimage: Do not fill legacy_img_hdr for non-legacy
> > > >      XIP images
> > > >       > > >    tools: kwbimage: Add support for XIP SPI/NOR images
> > > >       > > >    tools: mkimage: Print human readable error when -d is not
> > > >      specified
> > > >       > > >    tools: mkimage: Do not try to open datafile when it is skipped
> > > >       > > >    tools: kwbimage: Add support for creating an image with no
> > > >      data
> > > >       > > >    arm: mvebu: Add support for generating NAND kwbimage
> > > >       > > >    arm: mvebu: Add support for generating PEX kwbimage
> > > >       > > >    arm: mvebu: Fix description of
> > > >      MVEBU_SPL_BOOT_DEVICE_(SPI|MMC) options
> > > >       > > >    arm: mvebu: db-88f6820-amc: Add defconfig for NAND booting
> > > >       > > >    arm: mvebu: clearfog: Add defconfig for SATA booting
> > > >       > > >    arm: mvebu: Remove A39x relicts
> > > >       > > >    arm: mvebu: Fix comment about CPU_ATTR_BOOTROM mapping
> > > >       > > >    arm: mvebu: Define env_sf_get_env_addr() also for Proper
> > > >      U-Boot
> > > >       > > >    arm: mvebu: Define SPL memory maps
> > > >       > > >    doc/kwboot.1: Update example description
> > > >       > > >
> > > >       > > >   arch/arm/mach-mvebu/Kconfig                   |  23 +-
> > > >       > > >   arch/arm/mach-mvebu/Makefile                  |  13 +
> > > >       > > >   arch/arm/mach-mvebu/cpu.c                     |  11 +-
> > > >       > > >   arch/arm/mach-mvebu/include/mach/cpu.h        |  21 ++
> > > >       > > >   arch/arm/mach-mvebu/kwbimage.cfg.in
> > > >      <http://kwbimage.cfg.in>           |   5 +
> > > >       > > >   .../serdes/a38x/high_speed_env_spec.c         |   4 +-
> > > >       > > >   .../serdes/a38x/high_speed_env_spec.h         |   4 +-
> > > >       > > >   arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.c |  14 +-
> > > >       > > >   arch/arm/mach-mvebu/serdes/a38x/sys_env_lib.h |  30 --
> > > >       > > >   arch/arm/mach-mvebu/spl.c                     |  84 +++--
> > > >       > > >   cmd/mvebu/Kconfig                             |  18 ++
> > > >       > > >   cmd/mvebu/bubt.c                              | 253
> > > >      ++++++++++++---
> > > >       > > >   common/spl/Kconfig                            |   9 +
> > > >       > > >   common/spl/spl_mmc.c                          |  12 +-
> > > >       > > >   ...rfog_defconfig => clearfog_sata_defconfig} |   2 +-
> > > >       > > >   ...efconfig => db-88f6820-amc_nand_defconfig} |   6 +-
> > > >       > > >   doc/kwboot.1                                  |   3 +-
> > > >       > > >   doc/mvebu/cmd/bubt.txt                        |  25 +-
> > > >       > > >   drivers/mtd/nand/raw/Kconfig                  |   4 +-
> > > >       > > >   tools/kwbimage.c                              | 297
> > > >      +++++++++++-------
> > > >       > > >   tools/kwboot.c                                | 200
> > > >      +++++++++++-
> > > >       > > >   tools/mkimage.c                               |  11 +-
> > > >       > > >   22 files changed, 768 insertions(+), 281 deletions(-)
> > > >       > > >   copy configs/{clearfog_defconfig =>
> > > >      clearfog_sata_defconfig} (98%)
> > > >       > > >   copy configs/{db-88f6820-amc_defconfig =>
> > > >      db-88f6820-amc_nand_defconfig} (92%)
> > > >       > > >
> > > >       > > > --
> > > >       > > > 2.20.1
> > > >       > > >
> > > >       >
> > > >       > Viele Grüße,
> > > >       > Stefan Roese
> > > >       >
> > > >       > --
> > > >       > DENX Software Engineering GmbH,      Managing Director: Erika Unter
> > > >       > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > > >       > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email:
> > > >      sr at denx.de <mailto:sr at denx.de>
> > > > 
> > > 
> > > Viele Grüße,
> > > Stefan Roese
> > > 
> > > -- 
> > > DENX Software Engineering GmbH,      Managing Director: Erika Unter
> > > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> > > Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
> 
> Viele Grüße,
> Stefan Roese
> 
> -- 
> DENX Software Engineering GmbH,      Managing Director: Erika Unter
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de


More information about the U-Boot mailing list