[PATCH 1/5] arch: arm: dst: fsl-ls2080a.dtsi: add an 'soc' node

[Ioana Ciornei]

The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.

Signed-off-by: Ioana Ciornei <ioana.ciornei at nxp.com>
---
 arch/arm/dts/fsl-ls2080a.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/fsl-ls2080a.dtsi b/arch/arm/dts/fsl-ls2080a.dtsi
index a1837454f43d..77fec065584b 100644
--- a/arch/arm/dts/fsl-ls2080a.dtsi
+++ b/arch/arm/dts/fsl-ls2080a.dtsi
@@ -35,6 +35,15 @@
 			     <1 10 0x8>; /* Hypervisor PPI, active-low */
 	};
 
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		dma-ranges = <0x0 0x0 0x0 0x0 0x10000 0x00000000>;
+
+	};
+
 	serial0: serial at 21c0500 {
 		device_type = "serial";
 		compatible = "fsl,ns16550", "ns16550a";
-- 
2.25.1