[PATCH V7 05/15] iot2050: Add watchdog start to bootcmd
Jan Kiszka
jan.kiszka at siemens.com
Tue Feb 28 19:19:13 CET 2023
From: Jan Kiszka <jan.kiszka at siemens.com>
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value
and this to zero by default. Users can then enable the watchdog once the
use and OS which picks it up during boot.
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
board/siemens/iot2050/iot2050.env | 8 ++++++++
configs/iot2050_pg1_defconfig | 2 ++
configs/iot2050_pg2_defconfig | 2 ++
3 files changed, 12 insertions(+)
diff --git a/board/siemens/iot2050/iot2050.env b/board/siemens/iot2050/iot2050.env
index 4bd93f0b2f4..02958798b49 100644
--- a/board/siemens/iot2050/iot2050.env
+++ b/board/siemens/iot2050/iot2050.env
@@ -7,3 +7,11 @@
*/
usb_pgood_delay=900
+
+watchdog_timeout_ms=CONFIG_WATCHDOG_TIMEOUT_MSECS
+start_watchdog=
+ if test ${watchdog_timeout_ms} -gt 0; then
+ wdt dev watchdog at 40610000;
+ wdt start ${watchdog_timeout_ms};
+ echo Watchdog started, timeout ${watchdog_timeout_ms} ms;
+ fi
diff --git a/configs/iot2050_pg1_defconfig b/configs/iot2050_pg1_defconfig
index 2f7a9d86794..258ad4c87e5 100644
--- a/configs/iot2050_pg1_defconfig
+++ b/configs/iot2050_pg1_defconfig
@@ -32,6 +32,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTSTAGE=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_SPL_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTCOMMAND="run start_watchdog; run distro_bootcmd"
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
@@ -140,6 +141,7 @@ CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_KEYBOARD=y
# CONFIG_WATCHDOG is not set
# CONFIG_WATCHDOG_AUTOSTART is not set
+CONFIG_WATCHDOG_TIMEOUT_MSECS=0
CONFIG_WDT=y
CONFIG_WDT_K3_RTI=y
CONFIG_WDT_K3_RTI_LOAD_FW=y
diff --git a/configs/iot2050_pg2_defconfig b/configs/iot2050_pg2_defconfig
index e3f82ad3065..2ff360b0623 100644
--- a/configs/iot2050_pg2_defconfig
+++ b/configs/iot2050_pg2_defconfig
@@ -34,6 +34,7 @@ CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTSTAGE=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_SPL_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTCOMMAND="run start_watchdog; run distro_bootcmd"
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_MAX_SIZE=0x58000
@@ -144,6 +145,7 @@ CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_KEYBOARD=y
# CONFIG_WATCHDOG is not set
# CONFIG_WATCHDOG_AUTOSTART is not set
+CONFIG_WATCHDOG_TIMEOUT_MSECS=0
CONFIG_WDT=y
CONFIG_WDT_K3_RTI=y
CONFIG_WDT_K3_RTI_LOAD_FW=y
--
2.35.3
More information about the U-Boot
mailing list