[PATCH V7 10/15] arm: dts: iot2050: Optionally embed OTP programming data into image
Jan Kiszka
jan.kiszka at siemens.com
Tue Feb 28 19:19:18 CET 2023
From: Jan Kiszka <jan.kiszka at siemens.com>
Use external blob otpcmd.bin to replace the 0xff filled OTP programming
command block to create a firmware image that provisions the OTP on
first boot. This otpcmd.bin is generated from the customer keys using
steps described in the meta-iot2050 integration layer for the device.
Based on original patch by Baocheng Su.
Signed-off-by: Jan Kiszka <jan.kiszka at siemens.com>
---
arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 9 +++++++++
board/siemens/iot2050/Kconfig | 7 +++++++
doc/board/siemens/iot2050.rst | 8 ++++++++
tools/binman/missing-blob-help | 8 ++++++++
4 files changed, 32 insertions(+)
diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
index 9082a79a034..a2fc8bbc123 100644
--- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
+++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi
@@ -111,10 +111,19 @@
};
/* OTP update command block */
+#if CONFIG_IOT2050_EMBED_OTPCMD
+ blob-ext at 0x6c0000 {
+ offset = <0x6c0000>;
+ size = <0x010000>;
+ filename = "otpcmd.bin";
+ missing-msg = "iot2050-otpcmd";
+ };
+#else
fill at 0x6c0000 {
offset = <0x6c0000>;
size = <0x010000>;
fill-byte = [ff];
};
+#endif
};
};
diff --git a/board/siemens/iot2050/Kconfig b/board/siemens/iot2050/Kconfig
index a2b40881d11..e66b2427d95 100644
--- a/board/siemens/iot2050/Kconfig
+++ b/board/siemens/iot2050/Kconfig
@@ -49,4 +49,11 @@ config IOT2050_BOOT_SWITCH
bool "Disable eMMC boot via USER button (Advanced version only)"
default y
+config IOT2050_EMBED_OTPCMD
+ bool "Embed OTP programming data"
+ help
+ Embed signed OTP programming data 'otpcmd.bin' into the firmware
+ image. This data will be evaluated and executed on first boot of the
+ device.
+
endif
diff --git a/doc/board/siemens/iot2050.rst b/doc/board/siemens/iot2050.rst
index 4e0925c72c9..cb49a0e36bf 100644
--- a/doc/board/siemens/iot2050.rst
+++ b/doc/board/siemens/iot2050.rst
@@ -27,6 +27,14 @@ The following binaries from that source need to be present in the build folder:
- seboot_pg1.bin
- seboot_pg2.bin
+For building an image containing the OTP key provisioning data, below binary
+needs to be present in the build folder:
+
+ - otpcmd.bin
+
+Regarding how to generating this otpcmd.bin, please refer to:
+https://github.com/siemens/meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh
+
Building
--------
diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help
index 1a30da7b5aa..db16229f9f2 100644
--- a/tools/binman/missing-blob-help
+++ b/tools/binman/missing-blob-help
@@ -23,6 +23,14 @@ See the documentation for IOT2050 board. Your image is missing SEBoot
which is mandatory for board startup. Prebuilt SEBoot located at
meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/seboot_pg*.bin.
+iot2050-otpcmd:
+See the documentation for IOT2050 board. Your image is missing OTP command data
+block which is used for provisioning the customer keys to the board.
+Please refer to
+meta-iot2050/tree/master/recipes-bsp/secure-boot-otp-provisioning/files/make-otpcmd.sh
+for how to generate this binary. If you are not using secure boot or do not
+intend to provision the keys, disable CONFIG_IOT2050_EMBED_OTPCMD.
+
k3-rti-wdt-firmware:
If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for
the R5F core(s) to trigger the system reset. One possible source is
--
2.35.3
More information about the U-Boot
mailing list